• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.790-797
• /
• 1997

에어로졸 재부유현상은 중대사고 방사선원항 평가에서 그 중요성이 인식되고 있으나 거의 모든 사고해석 코드에서 다루어지지 않고 있다. 따라서 본 연구는 지금까지 제시된 몇가지 유형의 에어로졸 재부유모델을 ORNL에서 실시된 에어로졸 재부유실험 데이터를 이용하여 정확도와 중대사고 해석코드에 적용가능성을 분석하였다. 본 연구에서 고려한 모델은 시간의 멱승함수와 지수함수형으로 표시된 모델들이다. 본 연구에서 분석한 바에 의하면 두 유형에 속하는 대부분의 모델이 재부유량뿐만 아니라 재부유율을 계산하는 데서 실험데이터와 상당한 편차를 보여 현재의 형태로 중대사고 해석 코드에 접목하는 데는 문제가 있는 것으로 분석되었다. 그러나 보다 광범위한 실험데이터를 통한 보완이 이루어진다면 모델식 자체의 간편함으로 접목이 용이할 것이다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.345-346
• /
• 2022

본 논문에서는 유류오염사고 발생에 의해 지반 내에 오염물이 유출되었을 때, 오염물 확산방지를 목적으로 차수재의 차수성능 평가를 위한 수치해석을 수행하였다. 해석결과, 차수재의 차수효과에 의해 동일한 투수계수 및 관측위치 조건에서 오염물 접촉시간 경과에 따른 농도가 크게 감소한 것을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.77-82
• /
• 2008

Recently, fatigue related to marine accidents was recognized to be very important contribution factor when marine accidents such as collision, aground, fire, etc. were investigated Many studies concerned about fatigue factors related to human error can be found. In this study, the analysis and examination of USCG Fatigue Investigation Program were carried out in order to investigate marine accidents happened in Korean waters. The Fatigue Investigation Program was established on the MAIFA(Marine Accident Investigators Forum in Asia) web site. Finally, the application plan of the program was discussed.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.10-21
• /
• 1987

Uncertainty analysis of the FLB accident is performed for KNU-1 using the response surface methodology and Monte Carlo simulation. The FLB analyses using the RELAP4/Mod6 were performed a number of times to generate the data base for the uncertainty analysis, along with the EM calculation for comparison purpose. Two kinds of input sets are utilized for response surface method to investigate and compare the effects of the uncertainty of input variables on the RCS peak pressure following a FLB. The first set is composed of six major plant operational parameters and the second set is composed of five major modelling parameters. It is found through the analysis of results that the uncertainties of modelling parameters have more influence on the RCS peak pressure than the uncertainties of plant operational parameters and that the extra margin of 9% of peak pressure is gained. And one of the assumptions of EM calculation, which is usually accepted as conservative is found to be erroneous, that is, the initial core inlet temperature is found to act negatively on the RCS pressure following a FLB.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.161-167
• /
• 2004

Maritime safety and marine environmental protection are the most important topic in marine society. But, so many marine accidents have been occurred with the development of marine transportation industry. On the other side, ship is being operated under a highly dynamic environment and many factors are related with ship's collision Nowadays, the increasing tendency to the human errors of ship's collision is remarkable, and the investigation of the human errors has been heavily concentrated. This study analysed on the human errors of ship's collision related to the negligence of lookout and classified basic error type using GEMS(Generic Error Modeling System) dynamic model.

• Korean Journal of Childcare and Education
• /
• v.8 no.5
• /
• pp.157-177
• /
• 2012

The purpose of this study was to examine the effect of the project approach on the thinking faculty improvement of preschoolers. The subjects in this study were 60 preschoolers who were selected from S kindergarten in Gyeonggi Province. After an experimental group and a control group were organized with 30 preschoolers each, the experimental group engaged in project activities that were based on the project approach, and the control group didn't. As a result of making a comparative analysis, the following findings were given. The preschoolers who participated in the project approach were found to excel over the other preschoolers who didn't participate in perceptual thinking, analytic thinking, synthetical thinking, inferential thinking and thinking faculty. Therefore there should be more consideration to the project approach in the sector of early childhood education, since the activities are effective in improving the thinking faculty of preschoolers.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.7-12
• /
• 2022

The main cause of cable accidents is the accelerated deterioration of the cable itself or internal and external electrical, mechanical, chemical, thermal, moisture intrusion, etc., which reduces insulation performance and causes insulation breakdown, leading to cable accidents. Insulation deterioration can occur even when there is no change in the appearance of the cable, so there is a difficulty in preventing cable accidents due to insulation deterioration. Since cable accidents can occur in areas with poor insulation due to the effects of overvoltage and overcurrent, it is necessary to comprehensively analyze transformers and circuit breakers, and ground faults caused by phase-to-phase imbalance. Ground fault accidents due to insulation breakdown of cables can occur due to defects in the cable itself and poor cable construction, as well as operational influences, arcs during operation of electrical equipment (switchers, circuit breakers, etc.). analysis is needed. This study intends to examine the causes of cable accidents through analysis of cable accidents that occurred in a manufacturing factory.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.80-82
• /
• 2013

해상 물동량의 증가에 따라 선박들이 점차 대형화 되어 가고 있고 선박의 수 또한 지속적으로 늘어나고 있다. 이러한 현상은 곧 해양사고의 증가로 이어지고 있는데 이 중 인적과실에 의한 해양사고가 대부분의 원인으로 밝혀져 있다. 인적과실 중 항해나 당직근무 중 졸음에 의한 사고가 빈번한데 이를 방지하기 위하여 IMO(international maritime organization, 국제해사기구)에서는 선교 항해당직 경보시스템의 의무탑재를 시행하고 있다. 하지만 현행의 선교 항해당직 경보시스템은 재설정 방식에 따른 불편함 때문에 항해사들의 불만이 제기되고 있어 이에 대한 해소책으로 IMO에서는 모션센서를 선교 항해당직 경보시스템에 도입할 것을 권고하고 있다. 그러나 이 모션센서의 탐지기술이나 동작원리는 처음 육상용 화재경보시스템 혹은 보안시스템용으로 개발 및 제작되어진 것이므로 이를 특수한 조건인 선박의 항해당직에 적용할 때 야기될 수 있는 문제점이나 고려사항등을 검토해 볼 필요가 있다. 이 논문에서는 이 모션센서의 선교에서의 이상적인 구성, 필요한 기능, 적확한 작동여부, 모션센서와 압력센서나 음성인식센서와 같은 다른 수단과의 병용 등을 고려하여 모션센서의 최적기능 확보를 위한 성능기준을 제시하고자 한다.

• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.198-204
• /
• 1987

A plant simulation code, MCSIM (Micro-Computer SIMulator), has been developed to simulate plant transient accidents for pressurized water reactors. Reactor coolant system is modeled using decoupled energy and momentum equations, drift flux two-phase flow model and integral momentum equation. A two-fluid pressurizer model is used to simulate the pressurizer dynamics. Pot Boiler model is used for steam generator, steady-state decoupled energy and momentum equations for secondary side system, and point kinetics equations for nuclear power calculation. For test of the present version of MCSIM, complete loss of flow and RCCA withdrawal accidents are calculated with MCSIM. The results are compared with those in FSAR of KNU 5 & 6.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.203-215
• /
• 1995

A continued operation of RCPs during a certain small break LOCA may increase unnecessary inventory loss from the RCS causing a severe core uncovery which might lead to a fuel failure. After TMI-2 accident, the CEOG developed RCP trip strategy called “Trip-Two/Leave-Two” (T2/L2) in response to NRC requests and incorporated it in the generic EPG for CE plants. The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis determines the RCP trip setpoint and demonstrates the safe operational aspects of RCP trip strategy during a small break LOCA for YGN 3&4. The trip setpoint of the first too RCPs for YGN 3&4 is calculated to be 1775 psia in pressurizer pressure based on the limiting small break LOCA with 0.15 ft$^2$ break size in the hot leg. The analysis results show that YGN 3&4 can maintain the core coolability even if the operator fails to trip the second too RCPs or trips at worst time. Also, the YGN 3&4 RCP trip strategy demonstrates that both the 10 CFR 50.46 requirements on PCT and the ANSI standards 58.8 requirements on operator action time can be satisfied with enough margin. Therefore, it is concluded that the T2/L2 RCP trip strategy with a trip setpoint of 1775 psia for YGN 3&4 can provide improved operator guidance for the RCP operation during accidents.