• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.81-88
• /
• 1993

For searching the photosynthetic electron transport(PET) inhibitors, bio-rational screening system using thylakoid membranes extracted from wild and mutant cyanobacteria(Anacystis nidulans $R_2$) was developed. Generally, thylakoid membrane was more sensitive to the tested herbicides than the chloroplast from spinach in the Hill reaction. Higher resistant characteristics appeared in mutant D-5, Di-22 to diuron and mutant G-264 to atrazine as compared to wild type. To test the reaction of thylakoid membrane to herbicides, diuron and atrazine were applied simultaneously. Diuron and atrazine competed each other for binding with substituted amino acids, while diuron and dinoseb were non-competitive, and inhibiting activity was increased. Conclusively, bio-rational screening system using cyanobacteria was proved to be fast and efficient screening method for the development of PET inhibitors.

• Korean Journal of Head & Neck Oncology
• /
• v.13 no.2
• /
• pp.169-179
• /
• 1997

서론 : Laminin의 수용기로 알려진 Integrin $\alpha6\beta4$의 세포내 표현 정도는 편평상피암을 위시한 여러 악성종양의 전이능력 및 예후와 밀접한 상관관계가 없다고 알려져 있다. 이 Integrin은 Laminin과 같은 세포와 리간드와 결합하면 상피세포의 기저막 지주 구조물인 hemidesmosome의 세포체질 요소(cytoskeletal element)와 연관되어 그 결과 세포의 기저막과 세포내 케라틴을 연결하는 역할을 한다. Integrin $\alpha6\beta4$는 구조적으로 다른 많은 integrin들과 달리 $\beta$4의 세포질내 영역(cytoplasmic domain)이 특징적으로 크다. 이 세포질내 영역 $\beta$4 integrin의 기능은 아직 밝혀지지 않고 있으나 아마 세포 성장의 신호전달 및 악성종양의 특징인 침윤 전이에 관련할 것으로 보아지고 있다. 재료 및 방법: 저자들은 우선 $\beta$4 integrin의 wild type s-DNA와 $\beta$4 세포질내 영역(cytoplasmic domain) 및 $\beta$4의 tyrosine 인산화 반응 부위가 각각 결손된 c-DNA를 PCR을 통하여 합성하여 pRc/CMV 벡터에 삽입한 후 원래 $\beta$4 integrin의 발현이 결집된 인간 방광암 세포에 Calcium phosphate precipitation 방법으로 주입(transfection)시켜 형질변환된 세포를 면역형광법, Flow cytometry 및 Immunoprecipitation 방법으로 클로닝하여 wild type $\beta$4-full length(Clone FL), truncated $\beta$4-cytoplasmic domain(C1one CD), 및 mutated $\beta$4-tyrosine phosphorylation site (Clone M)을 얻었다. 암 세포의 부착 및 침투 능력의 기능적 연구로 모노 클로날 항체와 fibronectin, laminin, Matrigel을 단백질 기질로 사용하였으며 결과 비교를 위하여 pRc/CMV 벡터만 주입시켰던 클로운과 방광암 세포주를 $\beta$4 integrin 음성 대조군으로 또한 이 Integrin의 높은 발현을 보이는 두경부 편평상피암 세포주를 양성 대조군으로 이용하였다. 결과 : 세포부착능력에 있어서 온전한 $\beta$4 cytoplasmic domain이 존재하는 클로운이 laminin에 강한 부착능력을 보였으나 fibronectin의 부착정도는 $\beta$4 integrin의 표현정도와 관계없이 모든 클로운에서 비슷하였다. Matrigel을 투과하는 암세포 침윤 능력에서는 $\beta$4 integrin의 표현이 존재하는 클로운들이 투과 능력이 높았으나 세포외 리간드가 없는 control membrane을 사용하였을 때와 비교하여 투과능력의 차이를 보이지 않았다. 결론 : 유전자 주입(transfection) 방법으로 integrin의 다양한 클로운의 합성이 가능하여 이 Integrin의 암 세포의 부착 및 침투 능력에서의 기능을 규명 할 수 있게 한다. $\beta$4 integrin은 편평상피 암세포의 부착에 있어서 세포외 리간드 laminin과 특이 결합하여 부착 능력을 높이는 중요한 역할을 하며 편평상피 암세포의 침투에 있어서는 $\beta$4 integrin의 표현이 침투 능력을 높이는 역할을 하나 이때에는 laminin과 같은 리간드와의 특이 결합에 의존하지는 않는 것으로 사료된다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2018

Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2004

Adequate polymerization is a crucial factor in obtaining optimal physical properties and clinical performance of resin composite restorative materials. The purpose of this study was to determine the effectiveness of shade and depth on dental composite resin polymerized with plasma arc curing unit employing FTIR and microhardness. From this experiment, the following results were obtained : 1. The light transmission and microhardness by mode 6 in plasma arc curing were similar to by 20 secs in halogen light curing. 2. The experimental groups of A1, A2, A3, A3.5 were not signifcant difference to light transmission and microhardness on surface and 2mm depth, but were significant difference on 3mm and 4mm depth. Especially light transmission and microhardness were small in darker shade and deeper thickness. 3. Compared with depth cure, uncured monomer amount increased at more than 2mm depth. 4. The light transmission by FTIR and polymerization by microhardness were significant corelation.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.575-586
• /
• 2001

Stabilized polyacrylonitrile (PAN) fibers can be transformed into quasi-carbon fibers with different properties depending on heat-treatment processing parameters at lower temperatures than temperature for the fabrication of carbon fibers. It has been investigated from the preliminary work that appropriate quasi-carbonization processes at about 1100$^{\circ}C$ strongly influence various properties of quasi-carbon fiber/polymer composite as well as quasi-carbon fiber itself. The objective of the present work is to prepare quasi-carbon fibers from stabilized PAN fibers using various quasi-carbonization cycles and to examine their properties. Two temperature regions, up to 800$^{\circ}C$ and above 1000$^{\circ}C$, were used for quasi-carbonization processes. The chemical composition, physical properties, thermal stability, microstructure, mechanical properties and electrical resistivity of the quasi-carbon fibers prepared with different final heat-treatment temperatures, heating rates, holding times, heating steps, and purging gas purity were extensively examined. The results were also compared with those from stabilized PAN fiber and commercial PAN-based carbon fiber. The present study showed that a variety of properties of quasi-carbon fibers significantly depended on several quasi-carbonization process parameters.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.415-426
• /
• 2006

In this study, the changes in the degree of conversion (DC) and the microtensile bond strength (MTBS) of self-etching adhesives to dentin was investigated according to the time after curing. The MTBS of Single Bond (SB, 3M ESPE, USA), Clearfil SE Bond (SE, Kuraray, Japan), Xeno-III (XIII, Dentsply, Germany), and Adper Prompt (AP, 3M ESPE, USA) were measured at 48h, at 1 week and after thermocycling for 5,000 cycles between 5$^{\circ}$C and 55$^{\circ}$C. The DC of the adhesives were measured immediately, at 48h and at 7 days after curing using a Fourier Transform Infra-red Spectrometer. The fractured surfaces were also evaluated with scanning electron microscope. The MTBS and DC were significantly increased with time and there was an interaction between the variables of time and material (MTBS, 2-way ANOVA, p = 0.018; DC, Repeated Measures ANOVA, p < 0.001). The low DC was suggested as a cause of the low MTBS of self-etching adhesives, XIII and AP, but the increase in the MTBS of SE and AP after 48h could not be related with the changes in the DC. The microscopic maturation of the adhesive layer might be considered as the cause of increasing bond strength.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.108-113
• /
• 2013

Chalcopyrite material $CuInSe_2$ (CIS) is known to be a very prominent absorber layer for high efficiency thin film solar cells. Current interest in the photovoltaic industry is to identify and develop more suitable materials and processes for the fabrication of efficient and cost-effective solar cells. Various processes have been being tried for making a low cost CIS absorber layer, this study obtained the CIS nanoparticles using commercial powder of 6 mm pieces for low cost CIS absorber layer by high frequency ball milling and cryogenic milling. And the CIS absorber layer was prepared by paste coating using milled-CIS nanoparticles in glove box under inert atmosphere. The chalcopyrite $CuInSe_2$ thin films were successfully made after selenization at the substrate temperature of $550^{\circ}C$ in 30 min, CIS solar cell of Al/ZnO/CdS/CIS/Mo structure prepared under various deposition process such as evaporation, sputtering and chemical vapor deposition respectively. Finally, we achieved CIS nanoparticles solar cell of electric efficient 1.74 % of Voc 29 mV, Jsc 35 $mA/cm^2$ FF 17.2 %. The CIS nanoparticles-based absorber layers were characterized by using EDS, XRD and HRSEM.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2020

To improvement the swelling characteristics of the existing cutoff wall against the moisture, the permeability of the sand, calcium bentonite and solidifier mixture according to the contact with trichloroethylene (TCE) was evaluated. Characteristics analysis and the permeability test of the research materials were performed. The permeability was decreased as the mixing ratio of the calcium bentonite was increased and it was increased as the mixing ratio of the solidifier was increased. In conclusion, when mixing 15% of calcium bentonite and more than 30% of solidifier, the permeability coefficient in the underground water movement was analyzed as more than α × 10^-4 cm/sec showing that it does not block the underground water movement. In addition, as the permeability coefficient of mixtures after TCE reaction was analyzed as less than α ×10^-7 cm/sec, it satisfied the condition of blocking layer (less than 1.0 × 10^-6 cm/sec). Therefore, the calcium bentonite and solidifier can be utilized as barrier that showing the characteristic of percolation ability conversion in soil and underground water contaminated with TCE.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1448-1452
• /
• 2004

In this paper, a photodiode capable of obtaining a sufficient photo/ dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an Cr thin film formed as a lower electrode over the glass substrate, Cr silicide thin film(∼l00$\AA$) ) formed as a schottky barrier over the Cr thin film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the Cr silicide thin film. Transparent conduction film ITO (thickness 100nm) formed as an upper electrode over the hydro-generated amorphous silicon film is then deposited in pure argon at room temperature for the Schottky contact and light window. The high quality Cr silicide thin film using annealing of Cr and a-Si:H is formed and analyzed by experiment. We have obtained the film with a superior characteristics. The dark current of the ITO/a-Si:H Schottky at a reverse bias of -5V is ∼3$\times$IO-12 A/un2, and one of the lowest reported, hitherto. AES(Auger Electron Spectroscophy) measurements indicate that this notable improvement in device characteristics stems from reduced diffusion of oxygen, rather than indium, from the ITO into the a-Si:H layer, thus, preserving the integrity of the Schottky interface. The spectral response of the photodiode for wavelengths in the range from 400nm to 800nm shows the expected behavior whereby the photocurrent is governed by the absorption characteristics of a-Si:H.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.35-42
• /
• 2016

Room-temperature operating CdZnTe(CZT) material is an innovative radiation detector which could reduce the patient dose to one-tenth level of conventional CT (Computed Tomography) and mammography system. The pixel and pixel pitch in the imaging device determine the conversion efficiency of incident X-or gamma-ray and the cross-talk of signal, that is, image quality of detector system. The weighting potential is the virtual potential determined by the position and geometry of electrode. The weighting potential obtained by computer-based simulation in solving Poisson equation with proper boundaries condition. The pixel was optimized by considering the CIE (charge induced efficiency) and the signal cross-talk in CT detector system. The pixel pitch was 1-mm and the detector thickness was 2-mm in the simulation. The optimized pixel size and inter-pixel distance for maximizing the CIE and minimizing the signal cross-talk is about $750{\mu}m$ and $125{\mu}m$, respectively.