• Title/Summary/Keyword: 재료저항계수

Search Result 249, Processing Time 0.032 seconds

Reliability-based calibration for performance-based design of concrete structures with material and member resistance factors (재료저항계수와 부재저항계수를 적용한 콘크리트 성능설계의 신뢰도기반 계수보정)

  • Paik, In-Yeol;Shin, Soo-Bon;Bang, Dae-Jae
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.145-148
    • /
    • 2008
  • Recently, most of the international design code for concrete structures are trying to develope performance-based design specification with the limit state concept. To accomplish this object, it is necessary to define required performance and to measure the performance level of structure. The reliability index is one of the most attractive indexes to express the level of performance. In this paper, prestressed concrete beam is designed following member resistance factor and material resistance factor format and the reliability indexes are obtained and compared for different sets of resistance factors. Compatible sets of safety factors could be calibrated for given level of target reliability index applying the similar method presented in this paper.

  • PDF

Analsys of Roughness Coefficients Due to Bed Material Size (하상재료 입경크기에 따른 조도계수 변화 분석)

  • Kim, Yong-Jeon;Lee, Chan-Joo;Kim, Ji-Sung;Kim, Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.2053-2057
    • /
    • 2009
  • 본 연구에서는 국내하천을 대상으로 하상재료에 따른 조도계수 변화를 분석하였다. 조도계수 분석은 수위, 유량, 하천 단면 등을 직접 측정하여 미지질조사국에서 개발한 ncalc모형을 이용하였고 하상재료 분석은 ISO4364, ISO9195 기준으로 실시하였다. 조사 대상하천은 총 17개 하천으로 거석, 호박돌, 자갈, 모래 등 다양한 하상재료 특성을 반영할 수 있는 지점으로 선정하였다. 하상 재료 크기 $D_{50}$을 기준으로 하여 모래 자갈 혼합 하천이라 할 수 있는 2mm${\sim}$32mm 구간, 자갈 하천인 32mm${\sim}$64mm 구간, 호박돌 하천인 64mm${\sim}$128mm, 거석 하천인 128mm 이상으로 구분하였다. 분석 결과 실측 자료를 이용하여 계산된 조도계수는 유량에 따라 감소하는 경향을 보였으며, 고유량에서 0.04이하로 수렴하는 결과를 보였다. 이를 하상재료 크기에 따라 구분 지을 경우 입경이 커질수록 유량에 따른 변화 폭이 커지는 것으로 나타났다. 하상재료 입경의 크기가 64mm 이하인 하천의 경우 조도계수 변화 범위가 최대 0.02 로 나타난 반면 입경크기가 64mm이상인 하천에서는 최대 0.20 까지 나타나는 결과를 보였다. 조도계수는 일반적으로 수위 증가에 따라 흐름에 저항을 주는 요인들이 침수되면서 감소한다고 보고되었다. 하천의 하상재료 입경이 클 경우 저수위에서 하상재료에 의한 저항요인이 크게 발생되어 수면경사, 흐름 특성 등 조도계수에 영향을 주는 요인들이 생기는 것으로 판단된다.

  • PDF

Reliability Analysis of Concrete Road Bridge Designed with Different Resistance Factor Format (콘크리트 도로교 설계를 위한 저항계수 체계별 신뢰도 분석)

  • Paik, In-Yeol;Sang, Hee-Jung
    • International Journal of Highway Engineering
    • /
    • v.13 no.2
    • /
    • pp.147-157
    • /
    • 2011
  • As a background study to apply the reliability-based resistance factors to the domestic concrete bridge design code, a comparative study is conducted for the design results and the reliability indexes obtained by adopting different resistance factor formats to yield the design strength of concrete structures. The design results which are calculated by applying the section resistance factors of the current domestic design code and the material resistance factors of Eurocode are compared for the concrete beam bridge. The reliability index is calculated by considering the uncertainties involved in material, dimension and strength equation during the design procedure to get the strength of concrete structure. Also, the sensitivity analysis is performed to figure out which design variables have great impact on the reliability index. The resistance factors of the current domestic bridge design code, AASHTO LRFD and Eurocode are applied to the bridge design for flexure and shear strength and the results show that the resistance factors of the domestic code give the largest reliability indexes. It is observed that the probabilistic distribution of the live load makes difference for the reliability index and the yield strength of reinforcing steel and the live load have great impact on the reliability of both flexural and shear strength of concrete beam through the sensitivity analysis.

산화루테늄(RuO2) 제조기술

  • 이강명;이기웅;정경원
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 1996.06b
    • /
    • pp.281-283
    • /
    • 1996
  • 전자제품의 경박 단소화에 필수 부품인 칩저항기, HIC 등의 제조 기술은 급속한 성장을 이룬 반면에 가장 중요한 특성을 발현하는 전극 재료 및 저항 재료의 제조는 기술적으로 취약한 부분이다. RuO2와 Pb2Ru2O5.5는 저항 페이스트의 가장 중요한 원재료로서 저항 편차, 온도저항계수(TCR), 전압저항계수(VCR), NOISE 등의 전기적 특성과 페이스트이 흐름성, 보존 안정성 등의 작업성에 큰 영향을 미친다. 외국에서 산화 루테늄 분말 제조에 대한 많은 연구가 진행되어 오고 있으나 대부분 출발 물질을 염화 루테늄을 사용하여 RuO2 분말을 제조하고 있다. 이렇게 제조된 RuO2 분말은 전자 재료에 악영향을 미치는 염소이온이 잔류할 가능성이 높다. 본 연구에서는 Ru metal에서 루테늄산염을 만들어 위의 문제를 최소화 하였고, 전기적 특성이 우수한 고분산 초미립의 RuO2를 얻기 위해 산화, 환원, 정제, 배소 등의 제조 공정에 있어서 최적 조건을 고찰 하였다.

  • PDF

Flexural Resistance Statistics of Composite Plate Girders (국내 생산 강재를 적용한 강합성 거더 휨저항강도의 통계적 특성)

  • Shin, Dong Ku;Kim, Chun Yong;Rho, Joon Sik;Park, Young Suk
    • Journal of Korean Society of Steel Construction
    • /
    • v.19 no.2
    • /
    • pp.139-146
    • /
    • 2007
  • The objective of the present study is to provide statistical resistance statistics for steel-concrete composite plate girder sections under positive and negative moments. Statistical properties on yield strength, tensile strength, elongation, and fracture toughness of domestic structural steel products, gathered from an analysis of over 16,000 samples, were evaluated. Using the steel samples for the plate girder, the bias factor and the coefficient of variation of the ultimate flexural resistance for representative composite plate girder sections under positive and negative flexures were presented. In calculating the ultimate flexural resistance of the composite section, the moment curvature relationships were developed using the incremental load approach considering material nonlinearity for the steel girder. The predicted statistics can be used in the future for the efficient calibration of LRFD code.

The formation technique of thin film heaters for heat transfer components (열교환 부품용 발열체 형성기술 개발)

  • 조남인;남형진
    • Proceedings of the Korean Society Of Semiconductor Equipment Technology
    • /
    • 2003.05a
    • /
    • pp.98-105
    • /
    • 2003
  • 반도체 집적회로 제조 장치의 부품으로 사용되는 전도성 발열체를 박막형태로 제조하는 기술을 얻기 위하여 반도체와 금속을 혼합한 물질을 스퍼터 증착 기술 및 전자빔 증착기술을 이용하여 제작하고, 전기적, 재료적 특성을 분석하였다. 발열재료로는 몰리부덴과 실리콘 및 크롬 및 실리콘의 합금을 이용하였으며, 기판 물질은 알루미나와 실리콘질화막. 시리콘 산화막을 사용하였다. 발열물질은 온도의 상승파 하강에도 안정된 재료적 성질을 가져야 제품으로써 신뢰도를 유지할 수 있으므로 금속 (몰리부텐 또는 크롬) 실리사이드 (silicide)의 최종 phase 를 갖도록 하였는데, 실리사이드는 실리콘과 금속의 합금물질로 안정된 재료로 알려져 있다. 또한 발열재료의 온도저항계수를 최소화하도록 하였으며 온도저한계수 값의 범위가 20% 이내인 발열재료의 제조기술을 얻었다. 이러한 온도저항계수 최소화는 열교환 부품의 온도 정밀제어를 가능하게 한다.

  • PDF

Applicability of Existing Formulae for Composite Roughness (기존 복합 조도계수 산정식의 적용성)

  • Kim, Ji-Sung;Lee, Chan-Joo;Kim, Keuk-Soo;Kim, Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.1084-1088
    • /
    • 2010
  • 일반적으로 자연하천에서는 횡방향 흐름저항 요소가 매우 다를 수 있다. 이러한 하천은 흐름저항 요인에 따라 몇 개의 소단면으로 구분될 수 있으며, 1차원 해석을 위해서는 단면 전체를 대표하는 복합 조도계수(composite roughness coefficient)를 사용함으로써 수위 또는 평균유속의 계산이 가능해 진다. 복합 조도계수는 각 소단면의 면적(A), 윤변(P), 또는 동수반경(R)을 적절히 조합하여 각 소단면의 조도계수에 가중치를 부여하면서 계산되는데, 각 산정식들의 개발과정에 도입된 가정 조건에 따라 상이한 가중치를 부여하게 되며, 일부 산정식들에서는 횡방향으로 동일한 재료로 구성된 조건에서도 복합 조도계수 산정 결과는 하상재료에 의한 조도계수와 다른 값을 산정하게 된다. 본 연구에서는 13개의 기존 복합 조도계수 산정식을 이론적으로 검토하였고, 소규모 실내 수리실험자료로부터 실측 복합 조도계수와 계산된 값을 비교 분석하였으며, 소단면 분할방법에 의한 기존 산정식의 적용성을 분석하였다. 분석결과, 윤변을 가중치로 사용하는 경우는 실측 복합 조도계수 그리고 각 산정식에 의한 계산 복합 조도계수의 차이가 비교적 작게 나타났으나 각 산정식의 가정조건에 유의하여야 하는 것으로 나타났다. 한편 단면적 또는 윤변과 동수반경을 조합하여 가중치로 사용하는 경우는 방법별로 큰 차이를 보이는 것으로 분석되었고, 그 원인은 단면분할 방법에 기인하므로 이러한 방법을 적용할 경우에는 소단면 분할방법에 특히 주의하여야 함을 알 수 있다.

  • PDF

A Development of Sheet Resistance Meter for Thin Film Materials (박막 재료의 면저항 측정기 개발)

  • Kang, Jeon-Hong;Yu, Kwang-Min;Kim, Han-Jun;Han, Sang-Ok
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.233-234
    • /
    • 2009
  • 박막 재료의 면저항 측정은 일반적으로 FPP(Four-Point Probe)원리를 적용한 측정기률 사용하고 있다. 개발된 면저항 측정기의 특징은 dual configuration 기술을 적용하여 탐침 간격에 대한 시료의 크기 및 두께에 대한 보정계수를 고려하지 않아도 되므로 누구나 업고 정확하게 사용 할 수 있다. 측정범위는 $1\;m{\Omega}{/\square}\;{\sim}\;1\;G{\Omega}{/\square}$이며, 반복성과 재현성 및 직선성은 0.1 %이하로서 우수한 특성을 나타냈다. 또한 기존의 면저항 측정기에 적용된 single configuration 기술에서 나타나는 가장자리 효과의 단점을 dual configuration 기술을 적용하여 해결하였고 정밀 정확도를 향상시켰다. 개발된 면저항 측정기의 특성평가는 국가측정표준으로부터 소급성이 유지된 표준저항, 분할저항기, 면저항 인증표준물질 등을 사용하였다.

  • PDF

Analysis of Roughness Coefficients of Domestic Rivers (국내 하천의 조도계수 특성 분석)

  • Kim, Yong-Jeon;Lee, Chan-Joo;Kim, Ji-Sung;Kim, Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.1853-1857
    • /
    • 2008
  • 본 연구는 국내하천을 대상으로 하천의 단면 형상 및 수위, 유량자료를 실측하여 유량 변화에 따른 조도 계수를 산정하고, 하상 재료와 하천 규모에 따른 조도계수를 비교 분석하였다. 실측 자료는 다양한 유량 변화 자료를 얻을 수 있는 2007년 6월에서 9월 사이에 이루어졌으며, 대상 하천의 조도계수는 미국 지질조사국의 NCALC 모형을 이용하여 산정하였다. 조사 지점은 하상재료가 거석으로 이루어진 섬진강(곡성), 호박돌로 이루어진 평창강(방림), 달천(괴산), 홍천강(서면), 금강(현도1, 현도2)과 자갈 모래로 구성된 금강(이원) 지점, 모래하천인 내성천(평은) 그리고 도시하천인 탄천(복정)으로 총 9개 지점에서 이루어졌다. 조사 결과 모든 하천의 조도계수는 유량 증가에 따라 감소하면서 일정한 값으로 수렴하는 경향을 보였으며, 하상 입경과 규모에 따라 서로 다른 범위의 조도계수를 나타냈다. 가장 큰 조도계수의 범위를 보이는 곳은 하상재료가 큰 섬진강(곡성)과 홍천강(서면), 달천(괴산) 지점이었으며, 모래하천인 내성천(평은)과 도시하천인 탄천(복정)은 가장 작은 조도계수의 범위를 보였다. 또한, 하상 재료 특정입도($d_{16}$, $d_{50}$, $d_{84}$, $d_w$)가 흐름저항에 미치는 영향을 분석하기 위하여 Limerinos에 의해 제안된 상대조도를 분석한 결과, 하상재료의 특성이 상이하게 다른 섬진강(곡성)과 내성천(평은), 탄천(복정)을 제외하고 하상재료와 상대조도 사이에서의 관계식을 산정할 수 있었다.

  • PDF

The study on electrical properties of the NiCr thin film resistor (NiCr 박막저항의 전기적 특성 연구)

  • 류제천;김동진;김용일;강전홍;김한준;유광민
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.275-278
    • /
    • 2000
  • We were fabricated of NiCr thin film resistors(TFR) on A1$_2$O$_3$(99.5%) substrates by dc magnetic sputtering system. The characteristics of electrical resistance (Sheet resistance & Temperature-Coefficient of the resistance-value:TCR) by annealing condition and reactive gas on the resistors were studied.

  • PDF