• Magazine of the Korea Concrete Institute
• /
• v.10 no.2
• /
• pp.147-154
• /
• 1998

고유동 콘크리트의 특성을 판정하기 위한 방법으로서 기존에 알려진 재료분리 판정 방법은 매우 복잡하고 번거로운 실험방법으로 실무 적용에 많은 어려움이 있다. 그런데, 고유동 콘크리트의 유동성 측정 방법에는 슬럼프 플로우를 주로 측정하고, 슬럼프는 변화가 작아서 배제되고 있는 실정이나, 재료분리된 양상을 살펴보면 슬럼프 플로우는 큰 반면, 슬럼프는 작은 양상을 보이고 있다. 따라서 본 연구에서는 고유동 콘크리트의 재료분리 저항성을 슬럼프와 슬럼프 플로우의 조합으로 간단히 평가할 수 있는지 그 가능여부를 검토하고자 하였다. 연구 결과 슬럼프 플로우에 대한 슬럼프의 비는 양호한 재료분리의 평가지표로 이용할 수 있는데, 이 값을 2.5 이하로 유지하면 실무에서의 고유동 콘크리트는 양호한 재료분리 저항성을 관리할 수 있을 것으로 사료된다.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.141-149
• /
• 2018

In this study, compacting, passing performance, segregation resistance and rheological properties were tested to improve the stability of fresh concrete in the production and construction of self-compacting concrete (SCC) using hollow glass powder(GB). As a result, T50 reaching time was shortened up to amount of GB $2.0kg/m^3$. The compacting according to the amount of GB was improved by ball bearing effect of GB. However, T50 reaching time was slightly increased at $4.0kg/m^3$. In the case of passing performance, the result showed that plain was Class 1, GB $0.5{\sim}2.0kg/m^3$ was Class 0, GB $4.0kg/m^3$ was Class 1. Therefore, the passing performance was improved with 'No blocking' up to amount of GB $2.0kg/m^3$. Passing performance Block step (PJ) number by J-ring method was also best at GB $1.0kg/m^3$. In the case of segregation resistance according to the amount of GB, dynamic segregation resistance was increased compared to plain regardless of the amount of GB. And static segregation resistance showed 2.5% of segregation rate at GB $1.0kg/m^3$. Therefore, it was greatly improved compared to plain (12.5%). In the case of rheology property according to the amount of GB, plastic consistency by increasing of GB content didn't show big difference. However, yield stress by increasing of GB content was decreased with GB $1.0kg/m^3$. In conclusion, GB $1.0kg/m^3$ was effective for improvement of compacting, passing performance and yield stress. Also, it will be useful for stability of SCC by improving segregation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.923-926
• /
• 2008

Currently more high flow and high performance concrete is used for construction of buildings in the world. However, when high flow and high performance concrete put high performance water reducing agent in quantity to improve flow, it has a negative effect on concrete structures since segregation arises from it though flow will be improved. There are naked-eye observation, coarse aggregate washing test, L Flow test for permeation among reinforcing rods and measurement of viscosity to judge concrete segregation resistance. However, it is difficult to apply them to practical affairs since they are very complicated and troublesome. Therefore, the study analyzed EIS dividing slump flow value into slump value, how to valuate concrete segregation resistance more easily, on the basis of the existing reference materials to propose EIS. As the results, in the event of high flow concrete, it is desirable that EIS value is prescribed to be less than 2.5 at the time of managing segregation. Also, at the time of prescribing EIS with performance, it is judged that it is desirable to manage segregation as less than 2.2 (Grade 1), 2.2$\sim$2.4 (Grade 2) and more than 2.6 (Grade 3).

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.127-127
• /
• 2003

벼 도열병 저항성 조절과정을 연구하는 효율적인 방법은 돌연변이를 분리하여 해당유전자를 분석하는 것이다. 이를 위하여 벼에서 제조된 4가지 돌연변이 집단을 이용하여 도열병 저항성 돌연변이를 분리하였다. 실험재료로는 1) fast neturon을 처리하여 제조된 Moroberekan 2,000 라인, 2)T-DNA의 형질전환에 의해서 제조된 화영 1,000 라인, 3)DEB처리에 의해서 제조된 RIL260 3,000라인, 4) gamma ray 처리에 의해서 제조된 상해향혈나 10,000 라인 등이 사용되었다. 병 저항성이 감소된 돌연변이의 분리를 위하여 재료로 사용된 벼 품종과 비친화적 상호작용을 보이는 균주의 포자를 2-3주된 벼 잎에 직접 살포하는 방법을 이용하였다. 균주 접종 7 일 후에 blast lesion을 형성하거나 lesion mimic 표현형을 보이는 돌연변이 등 병저항성이 감소된 라인을 선별하였다. 현재까지 1) Moroberakan 5 라인, 2) 화영 4 라인, 3) RIL260 1 라인 등이 선별되었다. 이와 함께 병저항성이 현저히 증가된 돌연 변이를 선별하기 위하여 친화적인 균주를 사용한 실험에서는 상해향렬나 2 라인이 선별되었다. 선별된 돌연변이는 벼 도열병 저항성 유전자의 분리 및 저항성 조절기작을 연구하는데 효과적으로 사용될 것이다.

• Composites Research
• /
• v.29 no.5
• /
• pp.243-248
• /
• 2016

Although thermoset carbon fiber composite bipolar plates not only have high mechanical properties but also high corrosion resistance in acid environment, high manufacturing cost and low bulk electrical conductivity are the biggest obstacle to overcome. In this research, thermoplastic polymer is employed for the matrix of carbon composite bipolar plate to increase both the manufacturing productivity and bulk electric conductivity of the bipolar plate. In order to increase the electrical conductivity and strength, plain type carbon fabric rather than chopped or unidirectional fibers is used. Also nano particles are embedded in the thermoplastic matrix to increase the bulk resistance of the bipolar plate. The area specific resistance and the mechanical strength of the developed bipolar plate are measured with respect to the environmental temperature and stack compaction pressure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.46.2-46.2
• /
• 2008

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.101-102
• /
• 2019

The use of high fluidity concrete has been added in recent construction work. In this study, we analyzed segregation resistance due to admixture substitution of the system high fluidity concrete that was hardened. The research results show that the resistance to segregation at the time of admixture replacement is improved. The best results were shown with a ternary system mixed like FA and BS.

• Composites Research
• /
• v.32 no.5
• /
• pp.222-228
• /
• 2019

The proton exchange membrane fuel cell (PEMFC) system has many potential uses as an environmentally friendly power source. Carbon fiber composite bipolar plates are highly corrosion resistant and have high specific strength and stiffness in acidic environments, however, the relatively low electrical conductivity is a major issue which reduces the efficiency of PEMFC. In this study, electrically conductive particles (graphite powder and carbon black) are applied to carbon-epoxy composite prepregs to reduce the electrical resistance of the bipolar plates. The electrical resistance and mechanical properties are measured using conventional test methods, and a unit cell performance evaluation of developed carbon composite bipolar plates is performed to compare with the conventional bipolar plate.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.275-282
• /
• 2002

High fluidity concrete needs high dosage of superplasticizer to acquire sufficient fluidity and high contents of fine powder and viscosity agents to prevent segregation. But it requires high manufacturing cost and has difficult in quality control. Therefore, in this paper, determination of optimal mixture proportion of segregation type superplasticizer for high fluidity concrete and manufacturing high fluidity concrete by applying developed segregation reducing type superplasticizer are discussed using flowing concrete method. According to test results, as dosage of superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that adding viscosity agent into it reduce bleeding and improve segregation resistance. Dosage of AE agent into it containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found.

• Research in Plant Disease
• /
• v.18 no.4
• /
• pp.317-323
• /
• 2012

The study aims to identify the pathogenicity of Phytophthora. capsici isolates in major pepper-producing areas in Korea and the inherit genetic pattern of phytophthora blight resistance by inocula. With five kinds of testing materials including 'Kataguma (Sakata Korea)' peppers, a disease-susceptible material, '#308', a phytophthora blight resistance material, 'CM334', and their $F_1$ and $F_2$, respective isolates of P. capsici obtained from Icheon, Eumseong, Buan, Imsil and Yeongyang regions together with six kinds of peppers' inoculum including PA-159 (KACC No.40482) received from Korean Agricultural Culture Collection were used for inoculation. The disease-susceptible material '#308', the resistant material 'CM334' and the non-segregating generation of $F_1$ represented 4.94-5.00, 1.00-1.07, and 1.01-1.08 phytophthora blight incidence respectively in the group comparison by isolate. This result means that the phytophthora blight resistance was clearly distinguished among testing materials in the group comparison by P. capsici isolate. Moreover, $F_2$ segregating generation showed 1.79-2.31 phytophthora blight incidence which turned out to be identical in the group comparison by the six isolates of P. capsici isolate and with similarity between both the resistant and susceptible materials. Thus, the result proved that using the six isolates of P. capsici tested as inocula was suitable to investigate the phytophthora blight resistance. When it comes to group comparison of $F_2$ segregation generation, however, isolates were divided with PA-159 isolate being the center: a group consisting of isolates from Icheon, Buan, and Imsil and a group consisting of Yeongyang and Eumseong isolates with higher pathogenicity. The expected segregation ratio of the phytophthora blight resistance in $F_2$ generation by isolate was analyzed. PA-159 isolate showed 3:1 or 9:3:3:1, indicating that one to two genes were involved. On the other hand, results also proved that there is an interaction of genes since both Eumseong and Yeongyang isolates showed a segregation ratio of 11:5 while the Icheon isolate represented 12:3:1.