• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.10-20
• /
• 2003

In this study, the effective properties were numerically calculated for laminated plain weave textile composites with arbitrary s tacking orientation angles. A single-field macroelement with modified sub-domain integration was used in the analysis to reduce computer resource requirement while efficiently accounting for the internal microstructure. A sample calculation procedure based on the Monte Carlo method was employed to consider the random shift between the layers. Results showed that a significant deviation occurred when the orientation angles were near 0 deg for extensional modulus and Poisson's ratio and 45 deg for the shear modulus. It was also found that the average properties calculated by the 2-layer numerical specimen had large differences compared to the CLT results, which indicated that a caution must be needed when designig of thin plain weave composite structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.777-778
• /
• 2012

• Composites Research
• /
• v.13 no.6
• /
• pp.63-72
• /
• 2000

In this paper, statistical treatments of effective properties for plain weave textile composites were presented. Configurations up to 32 layers with varied stacking phase shifts were considered. Effective properties were calculated by numerical simulation in which uni-axial tensile and shear load were applied at unit cell. Sample analysis was utilized to consider the inherent randomness in the phase shift and the results were treated statistically. It was found that effective properties were dependent on stacking phase shifts for thin plain weave textile composites. The distribution of $E_{xx}$ and $V_{xy}$ were skewed and the range of possible values was relatively large. As the number of layers increased, however, the distribution width became narrower and mean values converged. In contrast, $G_{xy}$ was not affected by phase shifts and thickness changes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.215-219
• /
• 2010

The evaluation of the mechanical properties and behavior is very important for the design of embankment using granular materials. In this research, the lab. tests with Nak-dong river sand were conducted to find out mechanical properties related to stress-strain behavior. Also, numerical simulations which can express the behavior of granular material were conducted by distinct element method. Distinct element method can play a import role to predict stress-strain behavior for different confining stress and loading condition if micro-parameters can be estimated in specific condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.13-21
• /
• 1987

4-4 품질관리 품질관리에는 세가지의 중요한 스텝이 있다. 첫째는 소요자재의 관리, 두째는 공장에서 조립할때의 관리, 세째는 출고관리이다. 특수 파괴설계방법론을 이 모든 과정들에 적용시켜야 할 것이다. 4-4-1 수입자재의 품질 자재들을 매입 혹은 수입할 경우에 검사하여야 할 여러가지 가 있다. 1 재료를 매입할 때 성질들이 얼마나 균일한가\ulcorner 2 최소 인성치는 얼마로 보증되어 있는가\ulcorner 3 재료들을 선별하여 거절하느나, 수락하느냐를 결정하기 위하여 어떠한 비파괴 검사법을 사용하느나\ulcorner 수입재료들에 대해서 파괴측정 시험을 해보면 실험방법이나 재료종류들에 관련되어서 실험데이타들에 전형적인 산포현상이 나타나게 마련이다. 예를들어보면 항복응력이 1400Mpa인 퀘칭하여 켐퍼링한 강의 공칭 파괴인성치는 $_{4}$는 90Mpa .root. m 일 수도 있고 60Mpa .root. m일 수도 있다. 아래 그림에 이 현상을 예시하였다. 파괴문제가 중요시 되는 부품에 대해서는 특수하게 파괴인성치를 규정하여 재료를 구입하여야 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.70-70
• /
• 2007

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.455-467
• /
• 2001

In this study, the stacking phase shift effect on the effective property and stress distribution was investigated for 8-harness satin weave textile composites under uni-axial tension. Textile configurations with varied phase shifts were modeled by unit cells and repeating boundary conditions were applied at the outer periodic surfaces. The effective property and stress were calculated by the unit cell analysis using macro-element to reduce the computational resource. It was found that stresses were dependent on the variation of tow arrangement of adjacent layers. The in-phase and the shifted configurations showed large differences in the stress distribution pattern. The stress level was very high in the resin region and the distribution of the maximum stresses was widely scattered.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.41-52
• /
• 2003

In this paper, three-dimensional thermo-mechanical properties of carbon-phenolic 8-hamess satin weave composites were predicted considering geometric parameters of microstructures. The effective properties were calculated by a series of numerical experiments based on unit cell analysis. The microstructural details were modeled through macro-elements, and the periodic boundary conditions were derived for corresponding un it cell types. The Monte Carlo method was employed to consider the random phase shift between the layers, and the results were investigated on the effect of the geometric parameters of shift, number of layers and waviness ratios. Experimental tests were also performed and the results were compared.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.701-706
• /
• 1997

원자로 압력용기 대형 냉각재상실사고에 기인하는 노심용융물사고의 영향을 검토하기 위하여 기초적인 건전성평가를 수행하였다. 먼저 유한요소해석을 통해 노심용융물양과 경계조건 변화에 따른 원자로 압력용기의 온도 및 응력 분포를 결정하였으며, 결정된 온도와 응력 분포와 Larson-Miller 곡선과 손상 법칙을 이용하여 원자로 압력용기의 손상 정도와 파손 시간을 계산하였다. 이때 재료물성치는 기존 문헌에 제시된 온도 의존적인 값을 선정하여 사용하였으며, 노심용융물양과 경계조건이 원자로 압력용기의 건전성에 미치는 영향을 비교 고찰하여 향후 연구방향을 도출하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1059-1064
• /
• 2012

In this study, tensile tests were performed on specimens that simulated the cold-bending and heat-treatment of pipe bends to understand the mechanical properties of pipe bends manufactured by cold-bending followed by heat-treatment for relieving residual stress. The strength and ductility of cold-worked materials were respectively found to be higher and lower than those of the parent material although heat-treatment was carried out to relieve residual stress. In addition, the increase in strength and decrease in ductility were proportional to the applied strain levels for cold-working. It was thus inferred that the intrados and extrados regions of pipe bends that were cold-bended and heat-treated show higher strength and lower ductility compared to the parent straight pipe and that the mechanical properties at the crown region are nearly the same as those of the parent straight pipe.