• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.322-331
• /
• 2016

Oil budget calculator identifies the removal pathways of spilled oil by both natural and response methods, and estimates the remaining oil required response activities. A oil budget calculator was newly developed as a response tool for Deepwater Horizon oil spill incident in Gulf of Mexico in 2010 to inform clean up decisions for Incident Comment System, which was also successfully utilized to media and general public promotion of oil spill response activities. This study analyzed the theoretical background of the oil budget calculator and explored its future application to Korea. The oil budge calculation of four catastrophic marine pollution incidents indicates that 3~8% of spilled oil was removed mechanically by skimmers, 1~5% by in-situ burning, 4.8~16% by chemical dispersion due to dispersant operation, and 37~56% by weathering processes such as evaporation, dissolution, and natural dispersion. The results show that in-situ burning and chemical dispersion effectively remove spilled oil more than the mechanical removal by skimming, and natural weathering processes are also very effective to remove spilled oil. To apply the oil budget calculator in Korea, its parameters need to be optimized in response to the seasonal characteristics of marine environment, the characteristics of spilled oil and response technologies. A new algorithm also needs to be developed to estimate the oil budget due to shoreline cleanup activities. An oil budget calculator optimized in Korea can play a critical role in informing decisions for oil spill response activities and communicating spill prevention and response activities with the media and general public.

• The Journal of Art Theory & Practice
• /
• no.14
• /
• pp.53-83
• /
• 2012

This thesis is a study of artistic measures and climate refugees, based on Hack's World Climate Refugee Camp project. According to Hack, climate refugees appeared with the process of globalization. Hack claimed that the people who put climate refugees in danger are the industrialized nations, and therefore, their rejection of refugees is nonsense. He also stated that the fundamental solution would be the active participation of such nations. Thus, he travels around the world, encouraging participants and globalizing his project. Interestingly, the practical participation method of his climate calamity project is divided into four methods, which are all related to realizing the danger and presenting various solutions. First, the aesthetic of survival: the reason Hack focused on the warming trend and claimed that we have to accept the climate refugees as refugees comes from the thought that we are all potential refugees, and the anxiety that climate refugees may cause war in the end. The solution Hack found for surviving in such a world is to create "refugee camps" to notify people about the seriousness of climate change, and to put the "aesthetic for survival" in action. Second, a relation-oriented relationship: communication between Hack and the participants was done in various ways. They are experiencing a bond and emotions of an interrelationship through their actions in the experimental field, experiencing a new form of art, which they were not able to experience in a museum. Third, a utopian measure: Hack's utopian measure started from the fear of dystopia but Hack still believes that it is not only a dream, but that it can be realized. He claims that even though the start may be feeble, it is possible to rescue children from starvation and to treat climate refugees as proper human in the end, when communication and cooperation is done the right way and properly. Fourth, the aesthetic of global relation, the internet: the new solution Hack is trying on the internet is to make more people participate in his project. It is fate that "human are the wrongdoer and the victim at the same time", but according to Hack's opinion, social disaster can be avoided through effort and it is optimistic that we can give form to the culture revolution we are experiencing now. Hack's project illustrated the importance of daily life, compared to art inside a museum, through active participation of the people and opened up a new method of art through realistic responses to disasters. This is distinctive from the past exhibitions, where artists gave shape and form to ideals and an imaginary world, in that it shows that the artist and audience aim for creating a community-like structure, just like Bourriaud's art method. Hack's project of climate calamity illustrates that installation and action art is not only an art genre which shows installation and activities, but that it can include social and political issues and that it can be completed with the help of participants, consequently becoming a genre of modern art. Hack raises a question about art's identity through various descriptions. Artists as planners, who base their artworks on their subjectivity or the characteristics of a specific period, the people as participants, the duet of art work and play, human and human, and further, human and nature. The practical participation method, as a measure for "disaster", reveals the new art of the 21st century within Hack's artworks. Even though there are several problems with Hack's usage of art as a measure for disaster, it will actively open up a new page for the 21st century's art with the theme of disaster.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.469-478
• /
• 2019

Purpose: In this studies we examine the facilities damage characteristics caused by forest fire. Therefore, we surveyed damaged facilities from forest fire which was occurred on Goseong-Gun on march 28 in 2019.(damaged areas was 40ha) The types of facilities uses were house, public facility, warehouse and so on. 17 facilities were destroyed. The purpose of this study was to for establishing a disaster safety village in rural areas where damage from a similar type of disaster occurs repeatedly by conducting the consciousness survey targeting at experts and disaster safety officials in a local government. Method: We surveyed meteorological factors(temperature, wind speed, wind direction, humidity) per a minute for analyzing weather condition on Goseong-Gun when forest fire was occurred, spread and extinguished. And we surveyed forest fire risk factors(a slope degree, a slope direction, a geographical feature, a distance between forest and facility, main species, the existence of crown fire ignition, the direction of facility, the main material of building) around 10 damaged facilities. Finally, we analyzed damage pattern of facilities using meteorological factor and forest fire reisk fator Result: The weather condition of Kanseonng AWS (No.517) was high temperature, arid and strong wind, when the forest fire was occurred and spread. An average wind speed was 4.1m/s and the maximum wind speed was 11.6m/s. The main direction of wind was W(225~315°). Damaged facilities were located on the steep slope area and on the mountaintop. The forest density around facilities was high and main species was korean red pine. The crown fire was occurred in the forest around damaged facilities. The average distance was 13.5m from forest to facilities. When the main matarial of building was made by fire resistance materials (for example, rainforced concrete), the damage was slightly. on the other hand, when by flammable material (for example, a Sandwich Panel), the facilities were totally destroyed Conclusion: The results of this research which were the thinning around house, making a safety distance, the improvement of main material of building and etc, will be helpful for establishing a counter measure for a forest fire prevention of facilities in wild land urban interface

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.925-938
• /
• 2022

Agricultural reservoirs are an important water resource nationwide and vulnerable to abnormal climate effects such as drought caused by climate change. Therefore, it is required enhanced management for appropriate operation. Although water-level tracking is necessary through continuous monitoring, it is challenging to measure and observe on-site due to practical problems. This study presents an objective comparison between multiple AI models for water-body extraction using radar images that have the advantages of wide coverage, and frequent revisit time. The proposed methods in this study used Sentinel-1 Synthetic Aperture Radar (SAR) images, and unlike common methods of water extraction based on optical images, they are suitable for long-term monitoring because they are less affected by the weather conditions. We built four AI models such as Support Vector Machine (SVM), Random Forest (RF), Artificial Neural Network (ANN), and Automated Machine Learning (AutoML) using drone images, sentinel-1 SAR and DSM data. There are total of 22 reservoirs of less than 1 million tons for the study, including small and medium-sized reservoirs with an effective storage capacity of less than 300,000 tons. 45 images from 22 reservoirs were used for model training and verification, and the results show that the AutoML model was 0.01 to 0.03 better in the water Intersection over Union (IoU) than the other three models, with Accuracy=0.92 and mIoU=0.81 in a test. As the result, AutoML performed as well as the classical machine learning methods and it is expected that the applicability of the water-body extraction technique by AutoML to monitor reservoirs automatically.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.17-35
• /
• 2016

Earthquake-induced disasters are often more severe in locations with soft soils than firm soils or rocks due to differences in ground motion amplification. On a regional scale, such differences can be estimated by spatially predicting subsurface soil thickness over the entire target area. In general, soil deposits are generally deeper in coastal or riverside areas than in inland regions. In this study, a coastal metropolitan area, Incheon, was selected to assess site effects and provide information on seismic hazards. Spatial prediction of geotechnical layers was performed for the entire study area within the GIS framework. Approximately 7,000 existing borehole drilling data in the Incheon area were gathered and archived into the GIS Database (DB). In addition, surface geotechnical data were acquired from a walkover survey. Based on the built geotechnical DB, spatial zoning maps of site-specific seismic response parameters were created and presented for use in a regional seismic strategy. Site response parameters were performed to determine site coefficients for seismic design over the entire target area and compared with each other. Site classifications and subsequent seismic zoning were assigned based on site coefficients. From this seismic zonation case study in Incheon, we verified that geotechnical GIS-DB can create spatial zoning maps of site-specific seismic response parameters that are useful for seismic hazard mitigation particularly in coastal metropolitan areas.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.16-16
• /
• 2018

2017년 겨울, 기록적인 한파로 인해 바다가 얼면서 인천 앞바다로 유빙이 유입되었다. 2013년 해상에서 유빙이 발견된 이후 약 5년만에 다시 유빙이 등장한 것이다. 중부청 소속 항공단 순찰결과에 따르면, 2018년 1월 12일 인천대교 인근 해상에서 최초로 발견된 이후 강화 연안, 영종도 북단 등 해상에서 광범위하고 불규칙한 형태로 유빙이 분포되어 있는 것으로 나타났다. 유빙의 문제점은 해상에서 선박의 안전운항을 저해하고 경비함정의 안전에 지장을 초래하며 기름 유출 시, 유출유의 거동 특성이 달라져 일반적인 방제방법의 적용이 곤란한 점이다. 이에 따라 해상에서의 해양오염사고 대응방안 마련을 위해 저온 및 유빙 유입 해상에서 유출유의 거동 특성을 알아보았다. 구분인자를 극한의 추위(Extreme Cold), 유빙(Pack Ice), 정착빙(Fast Ice) 3가지로 분류하여 기름의 성상변화 및 시사점을 살펴보고, 유출된 기름의 효율적 방제를 크게 3가지로 분류(기계적 봉쇄 및 회수, 화학적 분산제의 사용, 현장소각)하였다. 일반적인 방제장비를 저온 및 얼음분포 해상에서 사용 시 슬러시화 된 얼음으로 인해 유출유 회수가 어렵고, 동결온도에서 장비가 오작동할 우려가 있다. 이미 북유럽 국가에서는 극한의 추위와 얼음분포 해상에 특화된 방제장비를 도입하여 해양오염대비 대응을 하고 있다. 2003년 3월 발틱해에서 불법적으로 유출한 선저폐수를 특화 장비는 brush bucket 유회수기 이용 방제조치한 사례가 있으며, 2006년 5월 같은 장소에서 선박 침몰로 인한 기름 유출이 발생했을때도 brush bucket 유회수기 이용 방제조치를 하였다. 국내에도 이상 기후로 인해 기록적인 한파가 지속되면서 북극에서나 볼 법한 유빙들이 발견되고, 해양오염사고는 언제 어디서나 발생할 수 있으므로, 해양오염방제의 임무를 맡고 있는 국가기관으로써 특수한 환경까지도 고려하여 대응방안을 마련할 필요가 있다. 해양오염이 재난으로 인식되고 있는 상황에서, 그리고 지구온난화로 인한 이상기후변화가 지속되는 상황에서 겨울철 유빙 유입은 점점 더 많아질 수 있다. 본 연구에서는 자료나 방제경험이 부족하므로 일찌감치 북극항로 개발로 앞선 방제기술과 경험을 가지고 있는 북극이사회를 벤치마킹하여 관할 해역 특성에 맞는 대응방안을 고찰해 본다.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.33-39
• /
• 2010

This study is to reduce the rate of drowning accident by using of buoyancy bag. People are exposed to the high risk of drowning accident when they have water leisure activities due to the lack of safety mind-set and shortage of safety products. In case of drowning accident, the rescue action is normally depending on the other people's assistance. Therefore, rescue activities which relyn the people doesn't improve the ratio of survival in the drowning accidents. The submarine specialists should use the buoyancy products to rescue the people in the drowning accident. The citizen can carry portable buoyancy product in the automobile as well as by hands anywhere and anytime. It will be effective rescue tool to save his/her life in the emergency. In addition, it will contribute to rescue other's life because it can be used immediately. There are 3 positive characteristics on the buoyancy bag. First, it is convenience. Documents and other stuffs can be kept in the bag. Second is safety. The material of buoyancy is placed in the inner of the bag. It is possible to float the person whose weight is 90 kg. Lastly, it is durability. It can be used long-term because the outer of the bag is made of anti-water material and anti-water zipper. As a result of performance analysis, it is evident that the buoyancy bag can be used to rescue the people in the drowning accident as a indirect rescue tool compared with the current other rescue products. It is recommended that the design of outer box and performance of buoyancy are required to be improved in order to contribute more to rescue people in the accident.