• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1049-1052
• /
• 1997

The pupose of this study on the surface finishing is to examine the performance of brushing as a means of reducing the surface roughness of the precision theaded shafts in ball screw assemblies. Ball screws provide superior performance compared to other types of screw feeds in terms of static and dynamic rolling resistance,backlash,and wear characteristics. The Reduction of the surface roughness of the lead shaft in ball screw assembiles is essential for precision movement,high speed/low noise tracel, and for low wear/long life. To reduce machine dependent errors that would influence the surface roughness compared with other lapping or polishing techniques,experiments will be performed using special wire brushes to polish precision ground shafts. The best results were obtained using the Al /sab 2/O /sab3/ brushes, with the Al /sab 2/O /sab3/ #500 grit brush producing a surface finish of approximately 0.7 .mu.m, and the Al /sab 2/O /sab3/ #600 grit producing a surface finish of approximately 0.8 .mu.m. Both of these results were produced at the highest wheel polishing speed of 3520 rpm. The SiC #500 brush produced a surface roughness of approximately 1 .mu.m at 3520 rpm.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1863-1864
• /
• 2008

한국전력거래소에서 운영중인 EMS(Energy Management System)와 MOS(Market Operation System) 설비는 각각 Alstom사와 ABB사에 의해 우리나라의 전력계통 특성에 맞게 제작되어 공급된 전력계통과 전력시장의 운영을 자동화한 시스템이다. EMS는 전력계통 감시와 효율적인 운영을 위해 전력계통을 모델링한 데이터를 활용하며, MOS는 실시간 급전계획 수립을 위한 기반자료로 전력계통을 모델링한 데이터를 사용하게 된다. 그러나, 대한민국 전력산업의 핵심인 두 시스템은 시스템 설계 방식 및 DB 구조가 상이하여 전력계통의 신.증설 및 변경 시 동일한 데이터를 양 시스템에 각각 따로 구축, 운영해야하는 실정이다. 이에 따라 DB작업을 위한 자료 준비부터 입력, 수정, 검증 등 모든 과정에 중복된 관리가 이루어지고 있다. 중복 관리는 양 시스템 간 DB의 주요 데이터 특성 및 명칭이 상이하여 일률적인 관리가 어렵고, 시스템별 특성 및 운영노하우가 없이는 인적실수에 의한 입력오류 개연성이 폭넓게 존재하는 등 현 상황에서 피할 수 없는 현실이었다. EMS와 MOS 시스템 중 최소한 개의 시스템을 전면 재구축하지 않으면 해결되지 않을 본 문제를 해소하기 위하여 전력거래소는 특정 시스템에 구축된 데이터를 변환알고리즘을 통해 나머지 하나의 시스템에 자동 구축할 수 있는 시스템을 개발하여 활용하고자 한다. 이것이 바로 EMS에 입력되어 정확성이 검증된 계통데이터를 추출하여 MOS의 데이터 형식으로 변환하고, 변환된 데이터를 MOS시스템에 자동으로 입력할 수 있는 MOS/EMS 데이터 자동변환시스템이다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제8권2호
• /
• pp.189-198
• /
• 2012

The demand of smart phone that recently came into spotlight as a new media is sharply increasing not only in Korean market but also in worldwide market but the academic study on this is still in the beginning stage. Hence, it would be a well-timed topic for discussion to make a systematic investigation and analysis. The technology acceptance model used in this study as a theoretical frame can set various external factors in introduction of new information technology as variables. This study made an assumption that such external factors would influence on perceived usefulness, easiness and amusement and such perceived awareness would make an impact on user's satisfaction and repurchase intention. This study proposed an empirical model in order to find out the recommendations and repurchase intention for new media, smart phone. This study model was validated to be very effective model that can explain more concretely and systematically for repurchase of smart phone. In conclusion, this paper illustrates a paradigm shift in smart environment to smart device manufacturers under fierce competition in the world market as well as various analysis results on consumer's use patterns according to such paradigm shift, which shall be utilized as useful information when establishing a marketing strategy for smart phone.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.239-240
• /
• 2006

For longer than picosecond pulses, bulk damage inside defect-free dielectrics involves the heating and multiplication of spurious electrons by the incident laser beam and transfer of this energy to the lattice. The situation is quite different for femtosecond pulses which are shorter than the time scale for electron energy transfer to the lattice. Damage caused by these pulses is produced with smaller statistical uncertainty and is controllable on a microscopic scale. These properties can be exploited to produce laser devices such as arrays of damage dots for all optical memories with high data storage density or arrays of parallel grooves to form transmission gratings. In this work, we observed characteristic of the femtosecond laser machining in BK7 and fused silica.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.209-210
• /
• 2006

We have successfully termed brown colored patterns inside of a transparent borosilicate glass generally known as BK7, laying the focus of near infrared Ti: sapphire femtosecond laser beam in the bulk BK7 glass. It is important to keep the laser power well below the damage threshold of BK7 in forming the color center. Thanks to the low laser power, there was no laser induced mechanical damage such as cracks or threads in the color formed area. From the absorbance spectrum and its gaussian fitting, we found the band gap of BK7, 4.21eV, and three absorption edges.

• Laser Solutions
• /
• 제15권3호
• /
• pp.1-6
• /
• 2012

The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and $50{\mu}m$ discrete line generated by 266 nm, 20 ns laser.

• Journal of the Korean Society for Precision Engineering
• /
• 제23권5호
• /
• pp.190-196
• /
• 2006

Transparent materials are widely used in the fields of optic parts and bio industry. We have experiment to find out the characteristics of the micromachining inside transparent materials using femtosecond laser pulses. With its non-linear effects by very high peak intensity, filament (plasma channel) was formed by the cause of the self-focusing and the self-defocusing. Physical damage could be found when the intensity is high enough to give rise to the thermal stress or evaporation. At the vicinity of the power which makes the visible damage or modification, the structural modification occurs with the slow scanning speed. According to the polarization direction to the scanning direction, the filament quality is quite different. There is a good quality when the polarization direction is parallel to the scanning direction. For fine filament, we could suggest the conditions of the high numerical aperture lens, the short shift of focusing point, the low scanning speed and the low power below 20 mW. As the examples of optics parts, we fabricated the fresnel zone plate with the $225{\mu}m$ diameter and Y-bend optical wave guide with the $5{\mu}m$ width.

• Korean Journal of Food Science and Technology
• /
• 제37권5호
• /
• pp.709-712
• /
• 2005

Structured lipid (SL) was synthesized by enzymatic interesterification of algae oil and corn oil in stirred tank batch reactor, The reaction, performed for 15hr at $65^{\circ}C$, was catalyzed by sn-1,3-specific lipase RM IM from Rhizonucor miehei without organic solvent. DHA, oleic acid, and linoleic acid contents of SL were 14.9, 17.3, and 31.8 mol%, respectively. ${\alpha}-,\;{\gamma}-,\;and\;{\delta}-tocopherol$ contents and physiochemical property of SL were evaluated. During 15 hr reaction, most reaction occurred within 6 hr, and highest relative production rate was observed between 3 to 6 hr.

• Korean Journal of Animal Reproduction
• /
• 제16권2호
• /
• pp.157-164
• /
• 1992

This stduy was carried out to obtain basic information available on ovulation, spawning, fertilization rate, hatching rate, and deformity rate after hCG injection in cyprinid loach, Misgurnus mizolepis. The results obtained in these experiments were as follows: 1. Ovulation and spawning occurred simultaneously and spawing was completed within 1 hour after ovulation. 2. More than 80% of fertilization rates appeared within 12 hours at 21$^{\circ}C$, 8 hours at $25^{\circ}C$, and 4 hours at 29$^{\circ}C$, respectively, following the onset of spawing. Afterwards, the fertilization rates of released eggs sharply decreased in three different water temperatures. 3. More than 70% of hatching rates appeared within 8 hours at 21$^{\circ}C$, 6 hours at $25^{\circ}C$, and 2 hours at 29$^{\circ}C$, respectively, following the onset of spawing. Afterwards, hatching rates of spawned eggs abruptly decreased in three different water temperatures. 4. The deformity rates of hatched larvae were high at $25^{\circ}C$, 8 hours following the onset of spawing. 5. Based on the developmental ability of oocytes, the optimum time of fertilization was 4 hours (stage 5) following the onset of spawing.

• Journal of Climate Change Research
• /
• 제7권2호
• /
• pp.111-120
• /
• 2016

In this study, Techno-economic evaluation model for carbon capture & sequestration (CCS) technologies are reviewed. Based on a key parameters of Korea's electricity market, performance data of 10 MW-scale post-combustion $CO_2$ capture pilot plant in Boryong station, the cost of $CO_2$ avoided was evaluated followed by international guideline suggested by IEA CCS costing methods task force. The result showed that Korea's Electricity cost including CAPEX & OPEX of reference power plant is relatively low compared to OECD nations which lead to a lower CCS cost ($33USD\;t/CO_2$). And future work using newly evaluated CAPEX & OPEX data of power plant with/without CCS is recommended.