• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.638-640
• /
• 2005

본 논문에서는 지중 실계통에 저감장치의 설치 위치를 다양하게 변경시켰을 경우 시스 순환전류의 변화를 분석하였으며, 그 결과 보통접속함에 저감장치를 설치하였을 경우가 절연접속함에 설치했을 경우에 비해 적은 저감효과를 보임으로써 저감장치 적용지점 선정에 있어 보통접속함의 저감장치 취부를 가능한 자제할 것으로 권하고 있는 국내 기준(안)의 타당성을 확인하였다.

• Progress in Medical Physics
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1993

방사선치료의 최적화를 위하여 위치결정장비로 이용되고 있는 simulator에는 gantry와 couch, 콜리메이터와 같은 기계적으로 운동하는 장치와 엑스선 발생장치, 투시용 영상증강관, 기계적 운동 장치의 위치를 알기 위한 지나 거리표시기, 각도 표시기가 포함되어 있다. 충돌에 의한 위험을 막기 위한 충돌 방지장치도 포함되어 있다. 여기에서는 정확한 시뮬레이션을 수행하기 위해 필요한 검사항목과 성능과 유지, 안전성 확보에 필요한 사항을 논의한다. 대부분의 검사항목에 대해서 검사기준을 제시하며 항목에 따라서는 검사방법을 예시한다. 이와 같이 다양하고 정밀한 장치의 성능관리업무는 전문가인 의학물리학자의 책임하여 수행되어야 한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.81-81
• /
• 2017

본 연구는 전산유체역학(CFD)을 이용하여 트랙터 캐빈 내부의 온도 변화 시뮬레이션 모델을 개발하고 이를 통해 공조장치의 위치를 최적화 하는 것을 목적으로 하였다. 자동차나 열차를 대상으로 시뮬레이션을 이용한 차량 내부의 유동 해석 연구 사례는 많으나, 트랙터를 대상으로 한 연구 사례는 적다. 이에 트랙터의 공조장치를 설계하고 그 성능을 검증할 때 시뮬레이션 모델을 활용한다면, 인력, 시간 등의 손실을 줄일 수 있을 것이다. 본 연구에서는 상용 CFD 프로그램을 활용하여 공조 장치의 위치에 따른 세 가지 트랙터 캐빈 모델을 제작한 뒤, 각각의 모델에 대해서 열 유동 해석을 수행하였다. 시뮬레이션 결과가 실제 트랙터의 시험 결과와 비슷한 경향을 보이고 있음을 확인할 수 있었으며 이를 통해 모델의 적합성을 확인하였다. 또한 세 가지의 캐빈 모델 중 탑승자에게 가장 쾌적한 환경을 제공할 수 있는 모델은 기존의 국내 트랙터와 같은 천정부에 공조 장치가 있는 것이 아니라, 핸들이 있는 전면부에 위치하는 것이 가장 적합하다는 것을 확인할 수 있었다

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.123-129
• /
• 2016

Recently indoor positioning technologies have been studied using the acoustic signal from a smart phone. Also multi-hop indoor positioning system in which the equipments measure their relative position successively has been proposed. As the total positioning error is prone to increase due to the successively accumulated positioning error for the multi-hop system, the error analysis is required for the system design. In this paper, the absolute positioning error for the multi-hop indoor positioning equipments successively installed is analyzed, and it is verified by computer simulation. According to the results, the accumulated positioning error is linearly increased as the number of the multi-hop increases.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.30-37
• /
• 2003

In order to replace the manual ultrasonic testing(UT) with an automated UT(AUT), a scanner which enables us to control the positions of a transducer is essential. Encoders have been commonly used to obtain the position information from the conventional scanners controlled by motor. Encoders have various advantages in many aspects. However, if the slip of motor wheel occurs during scanning, various errors are involved in the position accuracy. Thus, the position information of encoders becomes meaningless in case of slip. The reliability of AUT results nay become serious problem. Hence, slip must be avoided, but it can not be completely avoided at present time. In this paper, a new idea that surface wave is used to solve this problem and replace encoders has been proposed. It is shown that this idea can be employed in AUT scanner without encoders. That is, one transducer transmitting surface wave is fixed and the other transducer attached to the scanner receives UT signal. Then, computer calculates the present position of scanner based on the information given by surface wave. Thus, the movement of a scanner can be controlled by the amount of input based on the information obtained.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.640-644
• /
• 2009

현재 태양광 산업에서는 고정식 태양광 발전장치보다 발전 효율이 우수한 추적식 태양광 발전장치를 개발하는 연구가 활발하게 진행되고 있다. 추적식 태양광 발전장치는 고정식에 대비하여 단위면적당 일사량을 최대로 유지할 수 있을 뿐만 아니라, 일조시간을 최대로 하여 태양전지의 발전효율을 극대화할 수 있다. 따라서 정밀하면서도 저렴한 태양위치 추적장치는 태양광 발전사업의 경제성을 높이고, 성능 대비 투자비용을 낮춰 태양광 발전설비의 보급을 촉진시켜줄 수 있는 중요한 기술이다. 본 연구는 태양위치를 감지하는데 센서를 사용하지 않고 천문학과 수학을 이용하여 정밀도 1분($0.016^{\circ}$)이내의 태양위치를 계산하는 알고리즘에 관한 것이다. 본 연구에서 제안하는 알고리즘은 장치의 제작비용을 낮추어 줄 뿐 아니라, 발전효율도 높여준다. 구현된 알고리즘을 적용시킨 추적식 태양광 발전장치를 운용 실측한 결과, 최대 30초($0.0038^{\circ}$)의 오차를 보여 추적식 발전장치의 경제성을 높일 수 있고, 시간복잡도(Time Complexity)와 공간복잡도(Spatial Complexity)가 낮아 실시간 태양 추적장치에 최적임을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.466-474
• /
• 2014

According to wireless network technology and mobile processors performance were improved, the small wireless mobile device such as smart phones has been widely utilized. The mobile devices can be used GPS information, thereby the services based on location information was increased. GPS was impossible to provide location information in indoor and signal shading environment, and the tracking systems based on short distance wireless communication are required infrastructure. The IEEE 802.11 based tracking system is possible estimation using APs, however the tracking device is exhausted battery power seriously. In this paper, we propose IEEE 802.11 based low-power tracking system. We reduced power consumption from channel scanning and network connection. For performance evaluation, we designed and implemented the tracking tag device, and measured power consumption of the device. As the simulation result, we confirmed that the power consumption was reduced 46% compare to the standard execution.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.57-64
• /
• 2021

In the study, to minimize the error on guided control of the KV (Kill Vehicle) and to secure the hit-to-kill performance, a position accuracy inspection for the DACS (Divert and Attitude Control System) actuation system was proposed. The accuracy performance of the DACS actuation system is one of the most important factors in the interception of ballistic missiles. In order to validate actuation control accuracy of DACS system, an inspection item was set for position accuracy, and the inspection system was designed for DACS pintle. To measure the absolute position value of the DACS pintle, an external measurement system was developed using laser displacement sensors. The inspection system was designed so that it can be compared with the actuation command in real time. The proposed position accuracy inspection system can be inspected not only in a DACS system but also in missile system level. The position accuracy inspection was performed using the designed inspection system, and analysis of the inspection result.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.745-748
• /
• 2003

This paper presents a study on pull cord switch system which is employed in various industry for emergency stop of the equipments. By using power line communication(PLC) technique, in this paper, a new method for operation position detection of pull cord switch is suggested without complicated wiring of separate cables which utilize only 2 lines. Also, using control function of PLC IC, a reset signal for each switch reset can be implemented in the switch status control/sensing device. Finally, this paper shows validity and practical applicability of the proposed operating position sensing system of pull cord switch by implementing the system and revealing the response time and signal through the PLC line.