• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.192-196
• /
• 2004

The activity of Ir-192 sources for high dose rate (HDR) Brachytherapy in Korea were measured by using the well-type chamber and using the calibration Jig with the Farmer-type ionization chamber to compare the manufacturer certificated source strength which is supplied with each new Ir-192 source. The activity of two different source models used in six hospitals were measured. The range of measured activities to the manufacturer's suggested ones was -2.40% to +3.31% for the calibration Jig and -3.12% to 0.00% for the well-type chamber system. The source strength values given by the manufacturer for the 6 sources were within ${\pm}5%$ for the two different measuring equipment. Our results demonstrate that well-type chamber as wall as Farmer-type chamber system are appropriate system for the routine source calibration procedures in HDR brachytherapy. Whenever a new source is installed to use in clinics, a source calibration should be carried out.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.397-404
• /
• 2014

This survey was conducted between January 15, 2014 and February 25, 2014 to investigate the practice for infection prevention among dental hygienists. Data were obtained from 294 dental clinic worker who worked in dental hospital (clinics) of Gwangju and Chonnam. At the conclusion of this investigation, according to the conclusion of this investigation, the necessity of infection control education for dental hygienists and washing their gowns after caring infected patients affected the practice for infection prevention. They also well practiced the infection prevention working in dental hospital. To prevent infection in dental clinic, it is necessary to provide the continuing education programs for dental infection control to dental clinic worker.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.938-942
• /
• 2007

The importance of process improvement under construction has arisen from recent issue, lower productivity in the construction site. The various 3D modeling program is utilized in the procedure of construction as an alternative solution. However, it's still shortage of the consideration about a specific technical application. The purpose of the study in this paper is helpful to improve the productivity of construction site using 3D realization of constructing place as one of extensive modeling technologies, which leads to not only efficient management of construction site allowing people to check the real time situation in the place but also the revitalization of information flow about building process control and prgress, Therefore, I research into modeling algorithm and extensive construction site realization technology. 3D realization of building place would reduce the safety concerns by providing the real time information about construction site, and it could help to access easily to similar project through collecting and appling the database of sites. Furthermore it can be an opportunity to develop the procedure of production in construction industry and to upgrade the image of this field.

• Korean Security Journal
• /
• no.16
• /
• pp.1-17
• /
• 2008

This study is trying to analyse the private security prevention role of citizen, For this analyse the public opinion survey on the crime prevention of the private security was carried in Kyungnam area about the crime prevention system and the storage and institution, the role of the crime prevention of private security etc. So that, we have experimented a fact-finding survey about civil consciousness. The result of this fact-finding survey about crime prevention system is on the hand pointed out the circumscription of the police power, and the other hand they have the age-old ceremonies on the dependence about police system. Because the public security order needs the compelling power to maintenance the peace and this power is exercising only by police. They don't have the trust about the role of the private security as the crime prevention institution. But, they consider the private security is just for anyone in particular and special class by their demand. And also, they consider the private security is very expensive to utilize for their security in the everyday life. There for, some people have trust for the private security and if they have a chance for the security, they consider to utilize the private security for their safe life as an security agency. The private security has a powerful experts and so many high-tech equipments for the security. Thus, we have to find a solution to get the best out of it. Because the private security is also a part of crime prevention institution as the police agency.

• Journal of the Korean Society of Radiology
• /
• v.13 no.6
• /
• pp.857-864
• /
• 2019

Many countries, including Canada, operate a sonographer license system separately from a radiological technologist license. However, in Korea, radiological technologists perform ultrasound imaging under the guidance of doctors. Therefore, in order to have the opportunity to provide a systematic education by analyzing the job competency of the radiological technologist's ultrasound imaging, based on the Canadian National Competency Profile (NCP) lists, this study measured the job content validity of the job competences and detailed competencies required for performing ultrasonography in Korea. From the results of comparing and analyzing the importance of the core competencies included in the Korean radiological technologist's job competencies and the degree of job performance, the average overall importance was 4.087, the average of overall performance was 3.640, showing that the importance was higher than the performance and that there was a statistically significant difference. In conclusion, 'A Communication', 'B Professional responsibilities', 'D Operation of equipment' and 'G Workplace health and safety' showed high job content validity. However, it is said that as 'C Patient assessment and care', 'E Critical thinking and problem solving', and 'H Image' showed low job content validity, it is necessary to seek ways to strengthen and complement these competencies.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.144-152
• /
• 2019

According to the National Police Agency, point-to-point speed enforcement system is being installed and operated in 97 sections across the country. It is more effective than other enforcement systems in terms of stabilizing the traffic flow and inhibiting the kangaroo effect. But it is only 5.1% of the total enforcement systems. The National Police Agency is also aware that its operation ratio is very low and it is necessary to expand point-to-point speed enforcement system. Hence, this study aims to provide the expansion basis of the point-to-point speed enforcement operation through analysis of the quantitative effects and development the accident prediction model. Firstly, this study analyzed the effectiveness of point-to-point speed enforcement system. Naive before-after study and comparison group method(C-G Method) were used as methodologies of analyzing the effectiveness. The result of using the naive before-after study was significant. Total accidents, EPDOs and casualty crashes decreased by 42.15%, 70.64% and 45.30% respectively. And average speed and the ratio of exceeding speed limit decreased by 6.92% and 20.50%p respectively. Moreover, using the C-G method total accidents, EPDOs and casualty crashes decreased by 31.35%, 66.62% and 10.04% respectively. And average speed and the ratio of exceeding speed limit decreased by 3.49% and 56.65%p respectively. Secondly, this study developed a prediction model for the probability of casualty crash. It was dependant on factors of traffic volume, ratio of exceeding speed limit, ratio of heavy vehicle, ratio of curve section, and presence of point-to-point speed enforcement. Finally, this study selected the most danger sections to the major highway and evaluated proper installation sections to the recent installation section by applying the accident prediction model. The results of this study are expected to be useful in establishing the installation standards for the point-to-point speed enforcement system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.639-645
• /
• 2017

Application Specific Messages (ASM) have been introduced by a number of international bodies, such as the International Maritime Organization (IMO), the International Telecommunication Union (ITU) and the International Association of Lighthouse Authorities (IALA), for the purpose of resolving AIS overloading issues caused by an increasing number of ships using AIS systems. ASM communication will transmit a large amount of safety-related information at sea, including meteorological information, accident reporting, and navigational warnings. Specifically, this message transaction system is expected to be actively used for communication among ships and for ship-to-shore (4S), where VHF communication through voice was standard. In order to design a user-oriented service through standardised AIS-ASM messaging in the future, the need for analysis of this seems to be quite critical. In order to reflect users' AIS-ASM communication needs, therefore, frequently-occurring marine communication messages were analysed through a questionnaire survey conducted on 57 marine officers and 50 VTS operators. Based on the survey results, a list of key standardised messages was suggested as a reference for future AIS message development.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.31-37
• /
• 2021

To prevent accidents due to the cavities and loosened layers formed due to water leakage from the deteriorated buried pipes, evaluation of the changes in water contents around the buried pipes is required. As a method to evaluate the water contents of the soils, time domain reflectometry (TDR) system can be adopted. However, slender electrodes used in standard TDR probe may be damaged when buried in the ground. Thus, in this study, buried type TDR module was developed for the evaluation of the water contents with maintaining required shape of the electrodes in the ground. The TDR module is composed of three electrodes connected to the core conductor and outer conductor and a casing to prevent deformation and maintain alignment of the electrodes in the ground. For the verification of TDR waveforms measured using the TDR module, comparative analysis was conducted with the TDR waveforms measured using the standard TDR probe, and the relationship between the volumetric water content of the soils and the travel time of the guided electromagnetic wave was constructed. In addition, a model test was conducted to test the applicability of the buried type TDR module, and the experimental result shows that the TDR module clearly evaluates the changes in volumetric water contents due to the leakage from the modeled buried pipe. Therefore, the buried type TDR module may be effectively used for the health monitoring of the buried pipe and the evaluation of the water contents around the pipes buried in the urban pavements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.543-550
• /
• 2021

Recently, there has been an increase of accidents related to the rise in the use of Personal Mobility Vehicle (PMV). To solve this problem, the National Assembly announced an amendment that restricted the use of PMV to bicycle roads and to prohibited for people under 13 years old to use PMV, but there is no detailed information about travel speed and safety. In this study, a survey was conducted by dividing the group into minors and adults based on the age of obtaining a driver's license to find out the direction of improvement of laws and systems about PMV. Our results showed that adults considered PMV as more dangerous (Adults 5.50, Minors 4.94) and the suggested age for PMV use was lower from minors than adults (Adults 15.70, Minors 13.85). We found that proper travel speed on bicycle roads differed according to the presence of a driveway (Driveway 26.21 km/h, Non-Driveway 23.55 km/h) and minors had higher a travel speed than adults on all types of bicycle road. Also, Helmets for PMV were seen as the most important safety equipment on all types of bicycle road. and the importance of other safety equipment differed according to the presence of a driveway (Driveway Front-Lighting, Non-Driveway Car Horn). Through this study, It proposes that we have to make new regulations about the use of front lights and horns, as well as enforcement measures that differentiate the speed on each bicycle road type as a way to improve the laws and systems for PMV.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.