• Journal of Navigation and Port Research
• /
• v.35 no.5
• /
• pp.407-414
• /
• 2011

Floating architecture is the most effective way to accommodate itself to sea-level rise due to climate change. At the same time floating architecture is the best model to offer the new spatial experience through water-friendly environment. Domestic floating architecture is still on the early stage compared to Europe which has several companies specialized in designing and building floating architecture. Floating architecture is divided into 8 types according to its criteria such as program, form, scale, level, location, access, mobility and energy. The following are design characteristics of floating architecture : (1) composed of 2 stories, (2) having large deck, (3) designing rectangular plan and balanced mass, (4) maximizing view, (5) having water-friendly space, (6) multi-using space and minimizing surface, (7) planning section to control light reflecting from the water, (8) modular and unit system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1718-1725
• /
• 2008

Until 1980s, Korean elementary school architecture has been stereotyped by standard drawings. But there have been very few researches focused on this subject, especially regional one. As an attempt to improve these conditions, this study reviewed standard drawings of elementary school architecture by Education Board of Seoul in 1964 and 1975. Both standard drawings were reviewed through items such as components making a set of standard drawings, floor plan, elevation design and subsidiary facilities. They have rectangular unit classrooms, single-corridor block plan and plain exterior having no symbolic images, which are the characteristics of typical Korean school architecture until 1980s. On the other hand, they reveal the unknown characteristics such as double-corridor block plan, classrooms in basement, toilets of conventional type placed on every floor and changes in details of openings and exterior wall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.33-45
• /
• 1995

This paper as a sequel to Kang et al. (1994) describes the development of a three-dimensional nonlinear Galerkin-FEM model. Nonlinear advective terms have been incorporated in a manner used by Lardner and Song (1992), that is, using velocities at given nodes computed with linear Galerkin FEM model. The Proposed model is computationally more efficient than previous nonlinear Galerkin models developed by Owen (1980) and Davies (1980) because the model uses a linear shape function as a basis and, furthermore, the similarity transform technique developed by Kang (1994). Two experiments have been carried out to examine effects of nonlinear terms. One is an experiment of wind-driven current in a rectangular basin (Heaps' basin) and the other is an experiment concerning eddy generation behind a jetty with specified downstream and upstream open boundary conditions. The computed Pattern was found to be in good agreement qualitatively with previous model experiments by Stelling (1984).

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.379-383
• /
• 1996

The ultrastructure of the compound starch granules and the protein bodies of Odaebyeo rice of early matured variety were examined by light microscope and electron microscope. The endosperm cell appealed rectangular or octangular shape on the cross section. The thickness of cell wall containing of membraneous materials was about $0.5\;{\mu}m$ in diameter. The starch cell was filled compactly with globular or oval shaped compound starch granules with the size of $20{\sim}25\;{\mu}m$ in diameter. The compound starch granules were consisted of central core starch granule and concentrical $2{\sim}3$ layers of starch granules. The average thickness of the starch granules were about $5\;{\mu}m$. Most protein bodies were found in the aleurone layer The globular protin bodies were scattered near the compound starch granules and $2.5{\sim}3\;{\mu}m$ in diameter. The protein bodies composed of central electron dense materials and peripheral electron loose materials in limiting membrane.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.221-229
• /
• 2013

To find the influence of incident angle of wave on the moment of 3 storied steel moment resisting frame which is placed on the concrete rectangular pontoon, the fluid dynamic analysis is carried out, varying the period of wave from 5 to 15 second by 2 seconds. As increasing incident angle of wave to longitudinal axis, the influence of RAO-rolling is increased. The moment of longitudinal frame is increased apparently by the wave pressure when the incident angle is $0^{\circ}$. And the moment of the frame due to the wave pressure is decreased as the incident angle is increased. But the moment of frame due to acceleration caused from pitching and rolling is increased. It is shown that the increased moment when incident angle is $90^{\circ}$ is much greater than that of incident angle $0^{\circ}$.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.557-565
• /
• 2006

Proper operation of clarifier partly depends on outlet conditions. Effluent has to be uniformly withdrawn to prevent scouring of settled sludge and carry over of settling sludge from the clarifier. In this paper, 3-D numerical model was employed to analyze the flow and settling performance of the rectangular clarifier. There were two simulation conditions of which in the same clarifier, the first one was assumed to have a 11.5 meter weir length and the second has 8.5 meters. Shape, location and placement of the weir structure were different, but both of those outlets meet weir loading design criteria. Simulation results indicate that clarifier with longer weir generally gave strong and unstable currents at the mid-stream where the weir starts while in the clarifier with short and relatively simple weir, uniform and stable flow was observed in most parts of the settling zone, and especially at the weir region. These flow conditions affected settling performance. Effulent SS concentration from clarifier equipped with the long and complicated placement of weir was 24.5 mg/L, but 7.0 mg/L from the clarfieir having short weir length. From this study, it can be concluded that as reported from other studies, weir loading does not guarantee settling performance and 3-D numerical model can be a useful tool for determining and validating outlet structure.

• Solar Energy
• /
• v.11 no.1
• /
• pp.61-68
• /
• 1991

Steady laminar natural convection heat transfer from the isothermal square beam attached to an adiabatic plate has been studied for various inclination angles of the adiabatic plate and Rayleigh number by using Mach-Zehnder interferometer in air. As the inclination angles change, the different temperature and fluid flow field were obtained by the ascending heated fluid and the adiabatic plate. In this study, the inclination angles were $0^{\circ}$(positive & negative), $45^{\circ}$(positive & negative), and $90^{\circ}$. The maximum total mean Nusselt number value was found at a positive inclination angle ${\theta}=45^{\circ}$.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.304-313
• /
• 2019

Centered on top ten brands of jasmine tea in China "Zhang Yiyuan(張一元), Wu Yutai(吳裕泰), EFUTON (藝福堂), Shumingrun(蜀茗潤), Chunlun(春倫),Jinghua(京華),Bitan Piaoxue(碧潭飄雪), Tenfuku meicha(天福茗茶), Xiao Guan Tea(小罐茶),China Tea(中茶)", this paper has summarized four elements of packaging design (logo, color, layout, shape), developed a questionnaire of consumer preference degree on this basis, and conducted reliability and validity analysis. According to the questionnaire survey, the most popular logo is the "Xiao Guan Tea", and the most popular color among all six colors is the gray group. Among the eight lay outs of the jasmine tea package, the most popular lay out is the type 2 and the most popular package shape is shape 2 (rectangle).In conclusion, this paper has analyzed consumer preferences for packaging design of jasmine tea gift box based on the questionnaire survey results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.401-408
• /
• 2019

This study numerically examined the maximum wind pressure distribution of a billboard on the roof of a middle-rise building. The deformation caused by the maximum wind pressure was examined. For the numerical analysis, the signboard was assumed to be installed on $(b)20m{\times}(d)10m{\times}(h)$ buildings. The maximum wind pressure was measured using four models with the standard model and different sizes of the signboard. The numerical analysis showed that the horizontal deformation predominantly occurs as the shape of the signboard becomes closer to a rectangle, and high wind pressure and deformation occur at the corners of both ends. As the height of the signboard increases, vertical deformation predominantly occurs, and static pressure forms on the backside. When the height is lower than the width of the signboard, the wind pressure is concentrated on the center of the roof. Therefore, the distribution of the maximum wind pressure is stable, and the effect of the wind pressure is relatively low as the height-to-width ratio approaches 1.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.13-19
• /
• 2023

In this paper, we investigated the implementation of a hairstyle recommendation system based on big data and deepfake technology. The proposed hairstyle recommendation system recognizes the facial shapes based on the user's photo (image). Facial shapes are classified into oval, round, and square shapes, and hairstyles that suit each facial shape are synthesized using deepfake technology and provided as videos. Hairstyles are recommended based on big data by applying the latest trends and styles that suit the facial shape. With the image segmentation map and the Motion Supervised Co-Part Segmentation algorithm, it is possible to synthesize elements between images belonging to the same category (such as hair, face, etc.). Next, the synthesized image with the hairstyle and a pre-defined video are applied to the Motion Representations for Articulated Animation algorithm to generate a video animation. The proposed system is expected to be used in various aspects of the beauty industry, including virtual fitting and other related areas. In future research, we plan to study the development of a smart mirror that recommends hairstyles and incorporates features such as Internet of Things (IoT) functionality.