Proceedings of the Korea Water Resources Association Conference
/
2010.05a
/
pp.952-956
/
2010
저수지에 설치된 물순환장치는 저수지 수문상황과 자연조건의 변화에 따라 유동특성이 상이하므로 연구자가 고려하는 다양한 조건에서 현장 측정하기는 불가능하다. 이런 문제를 대체하는 방안으로 전산유체유동(CFD) 모형을 적용한 모사를 실시함으로서 다양한 조건에 따른 효과를 평가할수 있게 된다. 본 연구에서는 전산유체유동을 통한 대류식 물순환장치의 유동영향범위와 수질변화 등을 평가하고, 다양한 조건에서 모사를 실시하여 최적운영방안을 도출하고 실제운영에 활용토록 하고자 한다. 수체거동을 모사하기 위해 실제 저수지를 형상화한 Domain을 3가지로 구성하였다. 첫번째는 반경 20m, 깊이 40m Domain에 물순환장치를 중앙에 설치한 것이며(D20), 두 번째는 반경 40m, 깊이 40m에 두 개의 물순환장치를 양쪽에 설치하였고(D40), 세 번째는 반경 100m, 깊이 40m로 설정(D100)하였고 양쪽에 두 개의 물순환장치를 설치한 것으로 구성하였다. CFD에 의한 개별 대류식 순환장치의 유동모사결과 D20은 시간의 경과에 따라 수온성층이 하강하는 현상이 나타났으며 이러한 결과로 판단할때 40m 간격으로 대류식 순환장치를 설치하여 운영하면 탈성층이 나타날 수 있을것으로 판단되었다. D40에 대하여 CFD에 의한 유동모사를 실시하였으며 시간의 경과에 따라 수온성층의 변화는 나타나지 않았다. 이러한 결과로 판단할때 40m 간격으로 한줄로 대류식 순환장치를 설치하여 운영하면 성층을 깨는 현상은 나타나지 않을 것으로 평가되었다. 반면 Dye테스트시 심층에서 상승한 수체는 수온성층 표면에서 수평방향으로 계속 퍼져 나가면서 옆장치에서 상승된 수체와 혼합이 활발히 이루어 지는 현상을 나타내었다. 장치간 거리가 100m인 대류식 물순환장치에 의한 유동모사시 수온성층의 변화는 전혀 나타나지 않았으며, Dye테스트시 심층에서 상승한 수체는 수온성층 위에서 수평방향으로 퍼져 나가면서 옆에서 가동되는 장치에서 상승된 수체와 혼합 현상을 나타내기는 하나 D40보다 혼합시간이 더 걸리는 것으로 나타났다.
This study examined the environmental characteristics of shore pollution sources in the southern part of the Sinan, Jangsando area in the West Coast of Korea. A shoreline survey of the watershed was conducted to identify the pollution sources and measure the water discharge rate and microbial hygiene of water and finally estimate the possible impact area of pollution. Forty five of pollution sources in total were identified and they were grouped into sewage (33), agriculture waste water (1) and waste water from inland fish farm (11). Nine among them were discharged into the seawater and discharge volume was 72,857~281,250 l/min. Fecal coliforms of St. 72 (sewage) and St. 74 (shrimp farm) were 490 MPN/100 ml and 49 MPN/100 ml and the impact zones of the pollution were 4,389 m and 1,900 m respectively.
Park, Jeong Won;Park, Jae Ha;Song, Sung Jin;Kim, Hak Joon;Kwon, Se Gon
Journal of the Korean Society for Nondestructive Testing
/
v.36
no.6
/
pp.483-489
/
2016
The typical methods used for inspecting ferromagnetic pipes include the ultrasonic testing (UT) contact method and the following non-contact methods: magnetic flux leakage (MFL), electromagnetic acoustic transducers (EMAT), and remote field eddy current testing (RFECT). Among these methods, the RFECT method has the advantage of being able to establish a system smaller than the diameter of a pipe. However, the method has several disadvantages as well, including different sensitivities and difficult-to-repair coil sensors which comprise its array system. Therefore, a giant magneto-resistance (GMR) sensor was applied to address these issues. The GMR sensor is small, easy to replace, and has uniform sensitivity. In this experiment, the GMR sensor was used to measure remote field and defect signal characteristics (in the axial and radial directions) in a ferromagnetic pipe. These characteristics were measured in an effort to investigate standard defects at changing depths within a pipe. The results show that the experiment successfully demonstrated the applicability of the GMR sensor to RFECT signal detection in ferromagnetic pipe.
The magnetic field standard below 1 mT with the resolution of 0.26 nT has been established. Earth magnetic field (EMF) is compensated automatically down to 0.1 nT/10 min. by a closed feedback system with Cs optical pumping magnetometer and 3-axis Helmholtz coils in nonmagnetic facilities. A multi-layer precision solenoid with the optimized single-current method generates the uniform magnetic field better than 1.0$\times$10$\^$-7/ within $\pm$ 1 cm region at its center. The coil constant of solenoid determined from Helium optical pumping magnetometer is 1.231 058 9 mT/A, and temperature coefficient is 0.38 nT/$\^{C}$. This standard system is used for calibration of low field magnetometers and testing relates to low field.
Park, In-Yong;Jo, Bok-Rae;Han, Cheol-Su;Heo, In-Hye;Kim, Yeong-Jun;An, Sang-Jeong
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.254.1-254.1
/
2013
현재의 나노기술 및 부품은 나노미터 이하의 초고분해능을 요구하면서도 나노미터 이하의 정확도로 가공할 수 있는 기술을 요구하고 있다. 이온현미경은 위 두 요구조건을 만족하는 차세대 현미경으로써 초고분해능 이미징과 함께 기존의 갈륨이온을 사용하는 집속이온빔 장치보다 네온가스등을 이용하여 더 정밀하게 에칭 및 스퍼터링을 할 수 있다. 이온현미경은 전자현미경에 비해 더 깊은 초점심도를 갖으며, 색수차와 구면수차에 비교적 둔감하고 전자에 비해 무거운 이온의 무게 때문에 짧은 파장을 갖는 특징을 가지고 있다. 이와 같은 특징을 이용하면 전자현미경과 다른 여러 특징과 장점을 갖는 고분해능의 현미경을 제작할 수 있다. 이와 같이 차세대 현미경으로 주목받는 이온현미경의 중요한 부분인 이온총은 현재 가스장 이온 소스 방법으로 대부분 개발되고 있다. 가스장 이온 소스는 1950년대에 E. W. Muller에 의해 개발된 전계 이온 현미경(Field Ion Microscope)에서 응용된 방법으로 뾰족한 탐침에서의 가스 이온화를 기반으로 한다. 가장 보편적으로 사용되는 재질은 텅스텐으로 수십 nm 정도의 곡률 반경을 갖도록 제작하고 초고진공에 설치하여 강한 양전압을 인가함과 동시에 가스를 팁 주변에 넣어주면 팁표면에서 이온빔이 발생하게 된다. 본 연구에서는 위와 같이 차세대 나노장비로써 주목받는 이온현미경의 특징에 대해 소개하고, 특히 이온현미경의 이온총 원천기술 개발을 위해 연구하고 있는 가스장 이온 소스의 특성에 대해 소개한다. 수소, 네온, 헬륨의 전계 이온현미경과 함께 생성된 이온빔의 안정도 및 각전류 밀도를 계산하여 실제 이온총으로의 적용 가능성에 대해 보여준다.
KSCE Journal of Civil and Environmental Engineering Research
/
v.42
no.5
/
pp.671-679
/
2022
Harmful factors such as shock waves and fragments are generated at domestic ammunition testing sites and military shell shooting training sites due to frequent shooting and explosion tests. As a result, complaints from local residents are rapidly increasing, and there is a high risk of damage to facilities and human life. The recently constructed ammunition test site built a test facility for firing artillery and rocket propulsion in a narrow area with a radius of 300 m due to site restrictions, but damage to the facility is accumulating because there is no adequate protective structure. Therefore, in this study, quantitative data on harmful factors such as noise, vibration, shock wave, and thermal effect generated between artillery firing and rocket propulsion tests were measured, and explosion pressure characteristics were analyzed to design a protective structure, and use Autodyn to protect performance. to perform verification.
KSCE Journal of Civil and Environmental Engineering Research
/
v.31
no.6B
/
pp.531-539
/
2011
It has been widely acknowledged that climate system associated with extreme rainfall events was difficult to understand and extreme rainfall simulation in climate model was more difficult. This study developed a new model for extracting rainfall filed associated with extreme events as a way to characterize large scale climate system. Main interests are to derive location, size and direction of the rainfall field and this study developed an algorithm to extract the above characteristics from global climate data set. This study mainly utilized specific humidity and wind vectors driven by NCEP reanalysis data to define the rainfall field. Geometric first and second moments have been extensively employed in defining the rainfall field in selected zone, and an ellipsoid based model were finally introduced. The proposed geometric moments based ellipsoid model works equally well with regularly and irregularly distributed synthetic grid data. Finally, the proposed model was applied to space-time real rainfall filed. It was found that location, size and direction of the rainfall field was successfully extracted.
Jo, Hye Jeong;Jin, Ho;Park, Hyeonhu;Kim, Khan-Hyuk;Jang, Yunho;Jo, Woohyun
Journal of Space Technology and Applications
/
v.2
no.1
/
pp.41-51
/
2022
CubeSat is a satellite platform that is widely used not only for earth observation but also for space exploration. CubeSat is also used in magnetic field investigation missions to observe space physics phenomena with various shape configurations of magnetometer instrument unit. In case of magnetic field measurement, the magnetometer instrument should be far away from the satellite body to minimize the magnetic disturbances from satellites. But the accommodation setting of the magnetometer instrument is limited due to the volume constraint of small satellites like a CubeSat. In this paper, we investigated that the magnetic field interference generated by the cube satellite was analyzed how much it can affect the reliability of magnetic field measurement. For this analysis, we used a reaction wheel and Torque rods which have relatively high-power consumption as major noise sources. The magnetic dipole moment of these parts was derived by the data sheet of the manufacturer. We have been confirmed that the effect of the residual moment of the magnetic torque located in the middle of the 3U cube satellite can reach 36,000 nT from the outermost end of the body of the CubeSat in a space without an external magnetic field. In the case of accurate magnetic field measurements of less than 1 nT, we found that the magnetometer should be at least 0.6 m away from the CubeSat body. We expect that this analysis method will be an important role of a magnetic cleanliness analysis when designing a CubeSat to carry out a magnetic field measurement.
Most of the greenhouses employ the roll-up type ventilation control system. Torque required to roll-up and down might be theoretically expressed with the weight times radius of the ventilation roll; however, measured torques were two times of the theoretically estimated values. As the window film of roll-up vent is used over the periods of time, the warping and crumpling of the material caused the increase of the torque in addition to a span deformation. Therefore, this study was performed to develop an empirical torque formulae to present basic torque data and to assist the development of roll-up type ventilation control system. The empirically adjusted rolling radius (r+a) exponentially increased at the maximum span deformation. The coefficient of rolling resistance (Cr) was about 0.7―0.8 depending upon the wrinkle status of film material.
Park, Jong-Kwon;Jang, Pan-Ki;Cha, Tae-Gweon;Kim, Chan-Woo;Jang, Il-Young
Journal of the Korea institute for structural maintenance and inspection
/
v.19
no.4
/
pp.125-135
/
2015
The tendency of more longer span length being required economical in railway bridges is studying about PSC I shaped girder. In this case, it is important to analyze and choose the effective girder section for stiffness of bridge. This study investigates the dynamic properties and safety of PSC I shaped girder being used wide upper flange whose selection based on radii and efficiency factor of flexure for railway bridge in different span type. In addition, 40m PSC Box girder bridge adopted in Honam high speed railway is further analyzed to compare dynamic performance of PSC I shaped girder railway bridge with same span length. Time history response is acquired based on the mode superposition method. Static analysis is also analyzed using standard train load combined with the impact factor. Consequently, the result met limit values in every case including vertical displacement, acceleration and distort.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.