• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.165-174
• /
• 2004

This study is about a horizontal load test of buoyance anchor installed in the section where underground water level happens in the depth of 5m under the ground when the ground is excavated, because the section as a excavation section of high speed railway ${\bigcirc}{\bigcirc}$ station is near a rivers and because the section always has a reservoir of full water level on the left. Therefore, in this study we will appraise the long-term stability of the structure permanently being taken buoyance by the underground water level, through the spot test of the buoyance anchor installed in the section where underground water level happens. For that, Bar Type anchor is used, which can get enough pulling-out force by a method to resist buoyance by using friction force against the ground by high strength steel rod or steel wire. Anti-buoyance anchor is installed on the bottom slab of underground structure being taken horizontal force by the braking and accelerating of high speed train. And, It is aimed to analyze and grasp the review result of stability for the horizontal force that happens at the parking and stopping of high speed train, by executing horizontal load test for the grasping of the movements characteristic of buoyance anchor.

• Journal of Conservation Science
• /
• v.24
• /
• pp.1-11
• /
• 2008

The Unhyungung Water Container in the possession of the Seoul Museum of History in Korea is consisted of a calcareous marble developed laminated bedding and numerous argillaceous veinlets. This monument should need to conservation treatment because of black discoloration and seriously numerous cracks. Vertical and horizontal cracks in the monument are developed following stratification and argillaceous veinlets that are relatively low coherence between the rock materials. We have proved that the material inducing discoloration on the surface is carbon which is formed by deposited organic matters. As the result of the ultrasonic measurements, although highly surface weathering degree, the physical properties of the Unhyungung Water Container is confirmed slightly weathered state. The depths of cracks in the monument are calculated at maximum 60mm in some cracks completely penetrating into the wall and at minimum 9mm in the other crack. The cracks, developed following veinlet, are revealed that there penetrate from an outer wall to an inside wall for the monument. And most depths of cracks, developed following stratification, are calculated 20 to 30mm. This result will offer a significant data for conservation of the Unhyungung Water Container.

• Analytical Science and Technology
• /
• v.24 no.3
• /
• pp.212-218
• /
• 2011

In this study, temporal stability of 5 reduced sulfur compounds (RSCs) including ($H_2S$, $CH_3SH$, DMS, $CS_2$, and DMDS) was investigated up to 30 days. To learn the temporal changes in RSC concentration levels, two types of long-term storage experiment were carried out by employing two different approaches for sample storing in Tedlar bag samplers. The first one named as a forward (F) storage method consists of preparing all samples in the beginning of experiment. All these samples were analyzed sequentially through time. The second approach named as a reversed (R) storage method was carried out by preparing each sample through time and by analyzing all of them in the last day. For these experiments, RSC standards were prepared at 10 ppb in 10 L Tedlar bag. The results of both methods were consistent enough to show a tendency of the concentration reduction through time. Moreover, the lightest RSC, $H_2S$ showed the most significant reduction of 84.8% at the end of experiment. To validate difference between these results, t-test was applied to the data obtained between the two methods at 90% significance level. According to t-test, the results of the two approaches were greatly distinguished from 3 RSCs ($H_2S$, $CH_3SH$, and DMDS). The results also indicated that the temporal reduction of RSC differs greatly between light ($H_2S$ and $CH_3SH$) and heavy RSCs (DMS, DMDS, and $CS_2$). The former generally exhibited much significant reduction through time due probably to their lower stability.

• Applied Biological Chemistry
• /
• v.40 no.2
• /
• pp.95-100
• /
• 1997

This study was aimed to survey inexpensive and reliable sources of chitinase from the animal origin. The stomach and its content of the broiler, the cod, the yellowtail and ${\beta}-glucuronidase$ from snail gut showed a considerable chitinolytic activity, while those of the bas didn't have any detectable activity. These crude enzymes was found to have both endo- and exochitinase activity. The effects of pH and temperature on the enzyme activity were variable. The hydrolytic products of colloidal chitin by the enzyme preparation from the broiler and the cod were chitooligomers having the degree of polymerization between 3 and 5. Furthermore we observed the chitosanolytic activity from these enzymes. In the degradation of chitosan the chyme of the broiler had the highest activity and ${\beta}-glucuronidase$ from snail gut followed. On the basis of the fact that the by-product of the broiler was not only commercially available but also the most potent in the endochitinase activity and the lowest in the exochitinase activity, we conclude that the gizzard and its chyme are considered as the most suitable source of the industrial chitinase among animals studied in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.699-705
• /
• 2015

Aircraft needs high lift-to-drag ratio and weight reduction of the structure for long endurance flight with a small power. Generally high aspect ratio wing is applied to HALE(High Altitude Long Endurance) aircraft. Also high modulus, and high strength CFRP(Carbon Fiber Reinforced Plastic) has been used in primary structures. and thin mylar(membrane material) film has been applied to skin of wing. As a result, wing is more flexible than the other structures. and the stiffness of thin mylar film has an affect on dynamic stability. In this study, the membrane characteristic of mylar film has been simulated using nonlinear gap elements. And equivalent modeling method using shell elements is presented using the nonlinear simulation result. The linear equivalent model has verified using the results of nonlinear membrane method. Proposed linear equivalent shell model has applied to mode analysis for estimate the effect of mylar mechanical properties on natural frequency.

• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.59-66
• /
• 1981

Trichoxanthes Kirilowii with high starch-content was investigated to utilize as a food source. The weight and starch content of Trichoxanthes Kirilowii roots increased rapid1y in proporion to the growth period. The seasonal variations of the starch content were $36.5{\sim}48.0%$ (dry basis) from June to December. The chemical properties of natural growth soils of Trichoxanthes Kirilowii contained more organic matter and total nitrogen content than citrus orchard soils, but less mineral; P,K,Ca and Mg. To prepare starch with the plant root, the centrifugal method(3,000 rpm, 20 min) obtained the highest yield. The industrial-scale method, was similar to the processing of sweetpotato starch (tank precipitation method), and was good in quality. The starch granules were mainly spherical with diameters ranging from $5{\sim}16{\mu}$. The density of the starch was 1.535 and amylose content was about 26.7%. The X-ray diffraction pattern showed that the granules were of the B-type. The blue value of starch, amylose and amylopectin was 0.46, 0.80 and 0.18, respectively. The starch contained 0.05% ash, 0.35% crude protein and 34 mg% phosphorus. and had an inital pasting temperature of $63.5^{\circ}C$. The color intensity of the starch which iodine gave rise to absorption maxima at 670nm. The starch paste showed high stability during cold storage at $5^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.293-296
• /
• 2012

Nanocomposites were fabricated as titanium dioxide ($TiO_2$) doped with nanometals (Au, Ag) by sonochemical reduction method and sol-gel method in order to investigate their antimicrobial activities. Then, the antimicrobial activity of the resulting samples was compared by the measurement of colony numbers survived on the agar plate incubated for 24 h after the loading E. coli on the solid-state media with the nanocomposites. The initial antimicrobial activity of the metal (Au, Ag)-doped $TiO_2$ was higher than that of the pristine $TiO_2$. Afterwards the nanocomposite samples were kept at $4^{\circ}C$ for a long time and the aged samples exhibited the different antimicrobial activity. With the elapse of aging times, Ag-doped $TiO_2$ with $TiO_2$ coating ($Ag-TiO_2$@$TiO_x$) exhibited the higher antimicrobial activity than those of $Ag-TiO_2$and $Au-TiO_2$. The $TiO_2$ coating on the $Ag-TiO_2$ may prevent the oxidation of Ag nanometals and stabilize colloidal nanocomposites.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.111-116
• /
• 1998

The simple solid electrolyte carbon dioxide sensor with heaters were fabricated by using Li ionic conductor. Two Au electrodes were used for the reference and sensing electrode respectively. Two types of gas sensors, type ( I ) and type (II), were fabricated. Type ( I ) sensor was fabricated by the method of melting and crystallizing alkali metal carbonate at the temperature of $420{\sim}500^{\circ}C$. The sensing membrane of type (II) sensor was formed by the printing method on sensing electrode after metal carbonate was mixed with binder. The response characteristics of sensors fabricated for the carbon dioxide were investigated for a range of $CO_{2}$ concentration from 950 ppm to 9,950 ppm at operating temperature $420^{\circ}C$. Type ( I ) sensor and type (II) sensor showed the sensitivity of 62 mV/decade and 65 mV/decade respectively. The emf/decade of type (II) sensor tested at $420^{\circ}C$ almost followed the theoretical value of Nernst's equation and showed stable response characteristics with the fast response time of $15{\sim}20$ sec. Also type (II) sensor showed excellent stability and reproduction properties for 60 days.

• Clean Technology
• /
• v.18 no.2
• /
• pp.209-215
• /
• 2012

The performance and removal efficiencies of a pilot scale biofilter were estimated by using ammonia and hydrogen sulfide as the odorous gases. Expanded polyurethane foam coated with powdered activated carbon and zeolite was used as a biofilm supporting medium in the biofilter. Odorous gases from the sludge thickener of a municipal wastewater treatment plant were treated in the biofilter for 10 months and the inlet ammonia and hydrogen sulfide concentrations were 0.1-1.5 and 2-20 ppmv, respectively. The removal efficiencies reached about 100% at the empty bed retention time (EBRT) of 3.6-5 seconds except for the adaptation periods. The pressure drop of the biofilter caused by the gas flow was also low that the maximum attained was 31 mm $H_2O$ during the operation. Its stability was confirmed in the long term due to the fact that the biofilter and the polyurethane medium had a minimum plugging and compression. The microbial community on the medium is critical for the performance of the biofilter especially the distribution of ammonia oxidizing bacteria (AOB) and sulfur oxidizing bacteria (SOB). The distribution of Nitrosomonas sp. (AOB) and Thiobacillus ferroxidans (SOB) was confirmed by FISH (fluorescence in situ hybridization) analysis. The longer the operation time, the more microbial population observed. Also, the medium close to the gas inlet had more microbial population than the medium at the gas outlet of the biofilter.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.249-256
• /
• 2006

Catalytic combustion of toluene was investigated on the Cu-Mn oxide catalysts prepared by the impregnation(Imp) and the deposition-precipitation(DP) methods. The mixing of copper and manganese has been found to enhance the activity of catalysts. It is then found that catalytic efficiency of the Cu-Mn oxide catalyst prepared by the DP method on combustion of toluene is much higher than that of the Cu-Mn oxide catalyst prepared by Imp method with the same chemical composition. The catalyst prepared by the deposition-precipitation method observed no change of toluene conversion at time on stream during 10 days and at the addition of water vapor. On the basis of catalyst characterization data, it has been suggested that the catalysts prepared by the DP method showed uniform distribution and smaller particle size on the surface of catalyst and then enhanced reduction capability of catalysts. Therefore, we think that the DP method leads on progressive capacity of catalyst and promotes stability of catalyst. It was also presumed that catalytic conversion of toluene on the Cu-Mn oxide catalyst depends on redox reaction and $Cu_{1.5}Mn_{1.5}O_4$ spinel phase acts as the major active sites of catalyst.