• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.68-74
• /
• 2014

During the life firing test of 1 N-class thruster development model, pulse mode performance and performance changes were examined. The deviation of pulse mode response time according to thruster feed pressure was relatively small and the resultant ignition delay, response time, tail-off time were 32-35 ms, 86-91 ms, 89-98 ms, respectively. For the stabilized pulse region the impulse bit revealed the outstanding reproducibility of 1.41, 1.32, 2.10% at $3{\sigma}$. During the life firing test, the impulse bit was decreased with limited amounts, therefore the pulse mode performance could be considered to be maintained. The thrust centroid was also maintained during the life firing test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.59-67
• /
• 2014

Acceptance level random vibration and life firing test for development model of 1 N-class monopropellant thruster have been performed. From the results of random vibration, the natural frequency of the dual thurst module composed of 1 N-class development model thrusters was higher than the part level requirement(>100 Hz) and the structural robustness was verified. Thrust decrease of steady sate was below 7% and thrust instability was within ${\pm}5%$ in the life firing test using over 20 kg propellant throughput. The computerized tomography for catalyst bed showed a less than 7% of catalyst loss and it revealed the design appropriateness of the current thruster development model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.407-412
• /
• 2006

Most of the monopropellant thrusters use catalyst for decomposing hydrazine. The thruster lifetime is determined mainly by catalyst lifetime, which can be investigated by firing tests. For the development of hydrazine decomposition catalyst, Hot-fire test to verify long-life performance of catalyst is required. This study describes the development of test equipment for long duration hot-firing and test/evaluation plan.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.110-113
• /
• 2007

For the development of hydrazine decomposition catalyst, Hot-fire test to verify performance of catalyst is required. The purpose of a long-life firing test is to demonstrate the capability of a design to perform for the maximum duration or cycles of operation. This paper describes the progress of the catalyst performance test, explains the test matrix, and presents the test results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.101-104
• /
• 2009

KARI have been started development process of hydrazine decomposition catalyst for monopropellant thsuter from 2004 in cooperation with Chonnam National University and Hanwha Corps. Through the various trial and error, a catalyst that satisfies all the properties for space propulsion system was developed in 2009 and then the life firing test and qualification firing test was completed. In this paper, we will describe the development process of catalyst, the physical/chemical properties of final product and brief test results.