• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.261-261
• /
• 2021

자연하천은 직선하천보다 만곡하천으로 존재하는 경우가 많다. 하천의 만곡부에서 2차류 흐름과 나선형 흐름, 원심력이 수충부와 외측제방에 작용하여 하상에 국부적인 세굴이 발생한다. 세굴이 발생하게 되면 수충부나 외측제방에 붕괴나 피해가 일어날 수 있다. 세굴의 피해를 줄이고 만곡부유로를 조정하기 위해 날개형 수제를 설치할 수 있다. 날개형 수제를 설치한 하상은 수제의 두께, 길이, 높이, 간격, 위치, 배열 등에 따라 다르게 반응한다. 본 연구에서는 만곡 개수로에 잠긴 날개형 수제를 설치할 때 만곡 외측에서 수제 열까지의 거리가 만곡부의 유심선 변화에 미치는 영향을 이동상 개수로 수리실험으로 조사하였다. 이동상 수리실험은 폭 1.16 m, 깊이 1 m, 길이 24 m인 90° 만곡 개수로에 d₅₀이 3.3mm인 잔자갈을 깔아 하상경사 1/300로 정리한 후 수제를 설치하는 순서로 이루어졌다. 수제는 폭 20mm, 길이 70mm의 직사각형 단면 목재로 제작하여 설치하였고, 실험별 이격거리는 외측 제방으로부터 8.4 cm, 14 cm, 19.6 cm로 하였다. 실험유량은 140l/s로 3시간 동안 흘린 뒤 하상측정장치를 이용하여 주요 횡단면별 하상고를 측정하였다. 측정한 데이터를 이용하여 최심하상고의 크기와 위치, 유심선의 변화 등을 분석하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.265-273
• /
• 2002

In this paper, wave absorbing characteristics of a horizontal submerged punching plate are investigated throughout the calculation and the experiment. The punching plate with the array of circular holes can force the flow to separate and to form eddies of high vorticity and cause significant energy loss. As an analytic tool, the linear water wave theory and the eigenfunction expansion method is applied. Darcy's law that the normal velocity of the fluid passing through the punching plate is linearly proportional to the pressure difference between two sides of the punching plate is assumed. The proportional constant called the porous coefficient is deeply dependent to the porosity. To obtain the relationship between the porosity and the porous coefficient the systematic model test for the punching plates with 6 different porosities is conducted at 2-dimensional wave tank. It is found that the porous coefficient is linearly proportional to the porosity(b=57.63P-0.9717). It is also noted that the optimal porosity value is near P=0.1 and the optimal range of submergence depth is $d/h\\leq0.2$ within entire frequency range.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.29-42
• /
• 1992

자유표면하에 잠긴 복잡한 3차원 물체 주위의 흐름을 해소하기 위한 수치계산법이 TUMMAC(Tokyo Univ. Modified Marker And Cell)법을 기초로 하여 개발되었다. 임의물체의 no-slip 3차원 물체표면조건을 보다 간단히 처리하기 위하여 "porosity"라는 개념이 도입되었으며, 담수성에 잠겨 있는 해저돌출물 주위의 유동을 계산하여 그 응용성을 검토하였다. 돌출물 후방의 복잡한 와동들의 상호간섭이 잘 시뮬레이션 되었다.시뮬레이션 되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.711-711
• /
• 2012

이 연구에서는 수심적분된 이차원 비정상 수치모형인 KU-RLMS 모형의 잠김/드러남 기법을 개선하고, 기존의 WAD 기법과 새로 도입한 기법의 정확도 평가를 수행하였다. 기존의 WAD 기법은 수학적으로는 다소 불완전하지만 수치적으로는 손쉬운 방법으로써, 각 시간 단계에서 잠긴 격자 또는 드러난 격자를 시험하고, 각 격자의 경계에서 플럭스에 대한 개폐 조건을 적용하는 방법을 사용하였다. 개선된 기법은 WAD 경계에서의 질량보존을 고려하는 방법이다. 두 가지 잠김/드러남 처리 과정의 정확도 비교는 포물형 수조에 대한 해석해와 수치모형의 결과를 비교하는 방법을 사용하였다. 기존에 WAD 기법은 수치해와 해석해의 위상차가 발생하는 것을 확인할 수 있으며, 진폭은 조금씩 감소하는 현상이 나타났지만, 개선된 기법을 사용할 경우 위상차와 진폭감소 현상이 현저히 개선됨을 확인할 수 있었다.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.327-336
• /
• 2014

Submerged thin walls are extreme case of submerged rectangular blocks, and could be used for many purposes in rivers or coastal zones, e.g. to tsunami. To understand flow characteristics including flow and pressure fields around a specific submerged thin wall a numerical model was applied which includes computation of hydrodynamic pressure on ${\sigma}$-coordinate. ${\sigma}$-coordinate has strong merits for simulation of subcritical flow over mild-sloped beds. On the other hand ${\sigma}$-coordinate is quite poor to treat sharp structures on the bed. There have been a few trials to incorporate dynamic pressure in ${\sigma}$-coordinate by some researchers. One of the previous approaches includes process of sloving the Poisson equation. However, the above method includes many high-order terms, and requires long cpu for simulation. Another method SOLA was developed by Hirt et al. for computation of dynamic pressure, but it was valid for straight grid system only. Previous SOLA was modified for ${\sigma}$-coordinate for the present purpose and was adopted in a model system, CST3D. Computed flow field shows reasonable behaviour including vorticity is much stronger than the upstream and downstream of the structure. The model was verified to laboratory experiments at a 2DV flume. Time-average flow vectors were measured by using one-dimensional electro-magnetic velocimeter. Computed flow field agrees well with the measured flow field within 10 % error from the speed point of view at 5 profiles. It is thought that the modified SOLA scheme is useful for ${\sigma}$-coordinate system.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.448-457
• /
• 2011

A wetting and drying(WAD) scheme was introduced in KU-RLMS which is a two-dimensional depth-averaged unsteady model, and applicability tests for wetting and drying were performed in this study. WAD scheme in the model uses a mathematically less elegant but numerically easier method to test for dry or wet cells at each time step, then to apply blocking conditions for fluxes at cells' interfaces. WAD scheme introduced in the model was verified against an analytical solution in a frictionless parabolic basin. It was found that there occurs a little phase difference between analytical and numerical solution and little decrease of amplitude of numerical result. I used three test channels having a linear sloping bottom topography, a stepwise bottom topography, and a stepwise, a bumpy and bowl-shaped bottom topography. It could be found that numerical simulation results in test channels have similar shapes of Balzano[4] and Oey[15].

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.40-48
• /
• 1999

Wave absorbing system is needed at various kinds of wave basins (wave flume, towing tank, square tank) for the model test related to the ocean engineering. In this paper, the performance of wave absorbing system with new concept is estimated throughout the experiments. Herein, the wave absorbing system is designed by punching plate with a given porosity which is installed horizontally and submerged near the water surface. As the incident wave generated by a wave maker advances above a punching plate, the strong jet flow is formed near a hole of punching plate. As a result, wave energy is dissipated into heat energy, Systematic model tests were conducted at KRISO to verify the performance of the wave absorber using a punching plate. It was found that the reflection coefficient of wave absorber is deeply dependent on both the porosity and the submerged depth of a punching plate. Inclined installation of a punching plate shows better performance than a horizontal one within a certain inclined angle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.8-18
• /
• 2002

In this paper, wave energy absorption of OWC(oscillating water column) device is analyzed. The analytic model consists of a partially immersed circular vertical cylinder open at its end and an air turbine connected with the air chamber. The boundary value problem is decomposed into scattering problem related to scattering by an incident wave in the absence of a pressure variation and radiation problem describing the flow due to an oscillating pressure in the absence of an incident wave. By invoking the continuity of an air flow inside the chamber, the oscillating pressure in a chamber is derived. With oscillating pressure, the mean power absorbed by OWC device and the capture width are obtained. In numerical calculation, the induced volume flux across the internal free surface of the chamber in the scattering and radiation problem and the maximum capture width are compared with various design parameters such as radius and submergence depth of chamber and wave conditions. The maximum capture width obtained by choosing the optimal value of turbine constant occurs at the first resonant mode (Helmholtz mode) among the natural frequencies of a circular cylinder chamber.