• The Korean Journal of Pesticide Science
• /
• v.8 no.1
• /
• pp.30-37
• /
• 2004

This study estimated the correlation between surface area/weight ratios and pesticide residues in two varieties of tomato, mini tomato and tomato. The ratios of surface area/weight of mini tomato and tomato were $2.15cm^2g^{-1}$ and $1.00cm^2g^{-1}$ respectively. Pesticide residues were measured with four kinds of pesticide, chlorothalonil WP, chlorothalonil SC, oxadixyl WP, thiophanate-methyl WP. Ie residue amount of mini tomato was $1.4\sim2.4$ times higher than those in tomato regardless of the application date and frequency. The ratios of surface area/weight on tomato varieties played a key role for determining pesticide residue.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.61-68
• /
• 2014

Dissipation constants and half-lives of acaricides etoxazole and flufenoxuron in apples were calculated to establish their pre-harvest residue limits (PHRLs). The acaricides were sprayed on apples with single and triple doses based on safe use guidelines, and their residual patterns in the apple were interpreted using first order kinetics equation. The residual amounts of acaricides during the experimental period were below their maximum residue limits (MRL) for apple. The dissipation constants of acaricides in the apples were calculated at 0.0788 for etoxazole and 0.0319 for flufenoxuron corresponding to their biological half-lives; 8.8~21.7 days for etoxazole and 21.7~23.1 days for flufenoxuron. The PHRLs of acaricides in the apple showed the residual amounts of etoxazole and flufenoxuron at the harvesting date would be below their MRLs if their residual amounts were less than 0.87 and 0.88 mg/kg, respectively, at 7 days prior to harvesting the apples.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.125-130
• /
• 2008

A spherical indentation has been proposed as a nondestructive method of measuring local residual stress field in laser-voided joints. The apparent yield strengths interpreted from the spherical indentation data of as-welded cutting wheel were compared with the intrinsic yield strengths measured at nearly equivalent locations in annealed wheel. Their difference along the distance from the welding line is welding stress distribution because the intrinsic yield strength is invariant regardless of the elastic residual stress. The spherical indentations show that the laser-welded diamond cutting wheel displays a 10 min-wide distribution of the welding residual stress and has peak compressive and tensile stresses in the shank and tip regions, respectively.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.272-279
• /
• 2013

The dissipation patters of the triazole fungicides flusilazole and myclobutanil in apples were investigated to establish the biological half-lives and pre-harvest residue limits (PHRLs). The residual amounts of the fungicides sprayed with single or triple doses were below the maximum residue limits (MRL) for apples established by Ministry of Food and Drug Safety. The dissipation constants of the fungicides in the apples were 0.0513 for flusilazole and 0.0244 for myclobutanil meaning their biological half-lives were calculated as 6.2-6.7 days for flusilazole and 13.3-24.8 days for myclobutanil. The PHRLs calculated using the dissipation constants indicated that the residual amounts of flusilazole and myclobutanil in the apples at the harvesting date would be below the MRLs if their residual amounts were 0.43 and 0.59 mg/kg, respectively, at 7 days prior to harvesting the apples.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.269-277
• /
• 2011

Recent outbreak of new diseases and pests which were introduced from abroad, seriously hampered both quality and safety of paprika fruits. This study has been carried out to aid an establishment of guideline for safe use of pesticides and reduction of their residues on paprika. Systemic fungicides boscalid and pyraclostrobin of either mixed (a.i.; 13.6+6.8%) or single (a.i.; 47 and 18.8%, respectively) water dispersible granule formulation(WG) products were sprayed with recommended or double dosage on paprika grown in green house at March and June. To draw pre-harvest residue limit, residues of each fungicide were analyzed from fruits collected eight times from 18 to 1 day pre-harvest. The biological half-lives of both boscalid and pyraclostrobin in mixed formulation in March and June were slightly shorter than those of single formulation which ranged from 14.4 to 20.1 days. Residue levels of both fungicides of single formulation in fruits in June were about one lower compared to those in March. However, application of double dosage frequently exceeded MRLs from fruits grown both seasons. These results showed that residue levels on fruits persisted longer period of time, more than two weeks, and so the case applied in winter season. The dissipation of fungicides on leaves and fruits was compared. The distribution of both fungicides in leaves was 20-200 times higher than that of fruits and persisted up to 18 days of pre-harvest period at the concentration of 10-40 ${\mu}g\;g^{-1}$. This study indicated that the mixed formulation product exhibited low residues in fruits, but high and long enough to pathogen growth in leaves.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.250-252
• /
• 2016

본 논문에서는 과거와 현재지도를 자연스럽게 융합하여 살펴볼 수 있는 열 적외선 영상 기반 지도 조작 인터페이스 시스템을 제안한다. 이 시스템은 두 지도의 융합과 손가락 터치 검출로 구성되어 있다. 두 지도의 융합은 호모그래피 방법을 사용하여 과거지도를 워핑하고 이를 현재지도 위에 중첩하였다. 손가락 터치 검출은 열 적외선 카메라를 사용하여 손가락 접촉 후 생기는 잔류 열을 검출하였다. 손가락 접촉 위치는 검출된 잔류열을 이용하여 계산하였다. 현재 위성지도에서 특정 위치에 손가락을 터치하면 접촉한 위치를 계산하고 과거지도를 프로젝터로 투사하여 지도 조작이 가능하게 하였다. 제안하는 방법을 통해 구현된 인터페이스 시스템은 손가락 터치로 과거지도와 현재지도를 이해하는데 효과적으로 활용 될 수 있을 것으로 예상된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.59-66
• /
• 1991

전자기 접합후의 접합체의 접합력은 압재와 모재사이의 잔류 탄성 변형도에 의해 발생하게 된다. 즉 두 부재사이의 접합강도는 접합후의 잔류 탄성 변형량 및 사용재료의 기계적 강도에 의해 결정될 수 있다. 두 재료의 접합에서 전자기 접합법을 적용하여 얻을 수 있는 이점은, 압재 둘레를 따라 거의 균일한 압력을 작용시킬 수 있으므로 접합체의 외관이 균일하다는 점과 여타의 집합법과 비교하여 공정이 단순하고 비교적 높은 접합 강도를 얻을 수 있다는 점이다. 특히, 높은 접합 강도를 얻기 위해서는 접합체 형상설계, 그리고 이에 따른 자속 집중기 형상의 적합한 설계와 더불어 제공정 인자의 영향 분석을 통한 최적 공정의 선택이 필수적이다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1085-1093
• /
• 1999

Thickness effects of coupling agent on residual bending stress were investigated in $Polyimide/SiO_2$ joints during thermal cycling. Thickness and peel strength of $\gamma$-APS coupling agent were measured and correlated with solution concentration and residual bending stress. The variation of residual bending stress with temperature was also measured for various thicknesses of the coupling agent. Finite element results were compared with experimental data for residual bending stress in $Polyimide/SiO_2$ joints.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.11-17
• /
• 1995

본 연구에서는 SiC 및 SiC-TiB$_{2}$복합재료의 마모 및 마모천이기구를 비교 실험한 결과 다음과 같은 결론을 얻었다. 두 재료의 마모천이현상은 각각의 하중이 200N(SiC)과 80N(SiC-TiB$_{2}$)이상에서 나타나게 되었다. 마모기구는 임계미끄럼시간에서 두 단계로 나뉘어진다. 소성변형에 의한 grooving과정과 잔류응력에 의한 grain pull-out과정들로써 미세 구조를 통해 관찰할 수 있었다. grain pull-out과정은 초기단계에서 부터 생성된 전위가 축적되어 잔류응력을 발생시키므로 일어난 과정이다. SiC에 TiB$_{2}$를 첨가하므로 마모는 더욱 심하게 일어나게 되었다. 입계의 강도를 더 약하게 하였기 때문이다. 그러나, 파괴인성은 입계강도가 약할수록 증가하였다. 결국 파괴인성이 큰 재료가 마모는 더 심하게 일어남으로 서로 상반된 관계를 갖고 있슴을 결론지을 수 있었다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1921-1926
• /
• 2003

Nano-imprint technology has been vigorously studied by many researchers for it is one of the most promising technologies for manufacturing the pattern with its critical dimension below 100nm. In the nano-imprint technology, nano patterns are transferred on a polymer film and the transferred patterns are used as an etch mask to define the designed patterns on a substrate or a metal layer. To this end, it is important to keep the residual thickness of the imprinted polymer film uniform. In this study, a novel measurement technique to measure the residual thickness of films is proposed based on nanoindentation theory. This technique has advantages of saving time and measuring the residual thickness of highly-localized portions in comparison with other techniques, but has limitation of requiring calibration process.