• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.162-162
• /
• 2017

AlCrN 코팅은 높은 경도, 낮은 표면 조도 등의 상온에서의 우수한 기계적 특성 이외에 고온에서 안정한 합금상의 형성으로 인하여 우수한 내열성을 보이는 코팅이며, Si을 첨가하여 나노복합구조를 갖는 AlCrSiN 코팅은 고경도 특성을 나타내는 나노결정립과 고내열성을 나타내는 $Si_3N_4$ 비정질이 동시에 존재함으로써 뛰어난 고온 특성까지 보유하여 공구 코팅으로의 적용 가능성이 크다. 본 연구에서는, 가혹화된 공구사용 환경 대응 하는 더욱 우수한 내마모성 및 내열성을 보이는 코팅막을 개발하기 위해 AlCrN/AlCrSiN 이중층 코팅을 합성하였다. 합성된 코팅의 구조 및 물성을 분석하기 위해 field emission scanning electron microscopy(FE-SEM), nano-indentation, atomic force microscopy(AFM) 및 ball-on-disk wear tester를 사용하였다. 내열성을 확인하기 위하여 코팅을 furnace에 넣어 500, 600, 700, 800, 900도에서 30분 동안 annealing한 후에 nano-indentation을 사용하여 경도를 측정을 하였다. 5:5, 7:3, 9:1의 두께 비율로 AlCrN/AlCrSiN 이중층 코팅을 합성하였으며 모든 코팅의 두께는 $3{\mu}m$로 제어되었다. AlCrN 코팅층의 두께가 증가할수록, 이중층 코팅의 경도 및 내마모성은 점차 향상되었지만 코팅의 밀착력은 감소하였다. 일반적으로 AlCrN 코팅은 상대적으로 높은 잔류응력을 갖고 있으므로, AlCrN 층의 두께비율이 증가함에 따라 코팅내의 잔류응력이 높아져 코팅의 경도는 증가하고 밀착특성은 낮아진 것으로 판단된다. AlCrSiN 상부층 공정시 기판 바이어스 전압을 -50 ~ -200V 로 증가시키면서 이중층 코팅을 합성하였다. XRD 분석 결과, 공정 바이어스 전압이 증가함에 따라 AlCrSiN 상부층은 점차 비정질화 되었고, 코팅의 경도와 표면 특성이 향상되는 것을 확인하였다. 이러한 특성 향상은 높은 바이어스 인가가 이온 충돌효과의 증가를 야기시켰으, 이로 인해 치밀한 코팅층 합성에 의한 결과로 판단된다. AlCrN/AlCrSiN 이중층 코팅을 어닐링 한 후 경도 분석 결과, -150, -200V에서 합성한 코팅은 900도 이상에서 26GPa 이상의 높은 경도를 보인 것으로 보아 우수한 내열성을 갖는 것으로 확인 되었다. 이는 AlCrSiN 상부층의 높은 Si 함량 (11at.%) 으로 인한 충분한 $Si_3N_4$ 비정질상의 형성과, 고바이어스 인가로 인한 AlCrN 결정상과 $Si_3N_4$ 비정질상의 고른 분배가 코팅의 내열성을 향상시키는데 기여를 한 결과로 판단된다.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.47-52
• /
• 2003

In order to know residual pattern of pesticides and to predict degradation period until below MRL, we experimented with procymidone and bifenthrin for perilla leaf which were the most detected pesticides by NAQS (National Agriculture-product Quality management Service) survey. In this experiment, we sprayed those pesticides 10 days before harvest and analyzed 0, 1, 2, 3, 5, 7, 10 day samples to establish logical equation and to calculate $DT_{50}$. Also degradation patterns of those samples were compared during storage at 4t and 20t. During cultivating period, procymidone residue amount was changed from 79.52 mg/kg (0 day) to 4.2 mg/kg, $DT_{50}$ was 2.65 days by logical-equation, and bifenthrin residue amount was changed from 5.03 mg/kg (0 day) to 0.17 mg/kg, $DT_{50}$ was 2.24 days. During storage period, $DT_{50}$ of procymidone and bifenthrin at $4^{\circ}C$ was 12.23 days and 10.57 days, and at $20^{\circ}C$ was 6.32 days and 8.2 days, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.2
• /
• pp.29-37
• /
• 2017

As the behavior of the debris flow due to the torrential rains in mountain is affected by shear strength and rheological properties of the fine fraction in the ground, the evaluation of both properties is necessary to estimate the behavior of the debris flow. The objective of this study is to evaluate the shear strength and rheological properties using the direct shear apparatus. The direct shear tests are conducted for two kinds of fine-grained soil specimens, which are in dry state and liquid limit state. From the direct shear tests, shear strengths are measured according to the normal stresses applied on the specimens to evaluate the cohesion and internal friction angle. In addition, reversal shear tests are performed for the fine-grained soil specimens in liquid limit state according to the shear rate to evaluate the residual shear strength. The results of direct shear tests show that the specimen at the liquid limit state has lower internal friction angle and higher cohesion compared to the dry stated, and the residual friction angle and cohesion at the residual state are lower than those at the peak state. In the result of reversal shear test, the residual shear strength is directly proportional to the shear rate and viscosity is calculated as $73.60Pa{\cdot}s$. This study demonstrates that the direct shear apparatus can be effectively used for the evaluation of the shear strength and rheological properties of the fine-grained soils related with the debris flow.

• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.133-147
• /
• 2009

In order to develop the simultaneous analytical method for pesticide residues which ones in soil are rapidly and inexpensively measured by, many analytical methods for individual pesticide residue and several methods for multi-pesticide residues in agricultural commodities and food were reviewed. Various gas chromatographic conditions and pre-treatment procedures were intensively investigated and modified. And then new optimum procedure was established and its proficiency was validated. The response on detectors of simultaneous determination of 180 pesticides out of pesticides used in Korea was tested. The number of pesticides that their limits of detection (LOD) equal or lower than $0.05\;mg\;kg^{-1}$ were 137 pesticides on ECD, 170 pesticides on NPD and 179 pesticides on ECD/NPD integrated. The retention times of most pesticides ranged appropriately between 10 minutes and 40 minutes in the proposed chromatographic conditions. But about 90 pesticides eluded between 20 minutes and 30 minutes and so they were not resolved enough. In partition with dichloromethane, ethyl acetate/hexane (1:1) and ethyl acetate, number of pesticides whose extraction efficiency ranged from 70% to 120%, were 163, 154 and 147, respectively.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.198-202
• /
• 2004

It was carried out to compare the relationship of EEC 4-plate test method and Charm II test method by HPLC. 46 only tetracyclines, 4 only sulfonamides, 4 sulfonamides+tetracyclines, one amphenicols+tetracyclines, and one amphenicols+sulfonarnides+tetracyclines, it was detected on 71 porks of EEC 4-plate positive or Charm II positive by HPLC. In case of sulfonamides and chloramphenicols, two test methods had related with each other, but had no relation in tetracyclines. Also, it was $10.5\%(6/57)$ tetracyclines, $81.8\%(9/11)$ chloramphenicols that were EEC 4 plate positive or Charm II positive, but not detectrd by HPLC. Consequently, EEC 4-plate test method and Charm II test method were suitable by screening test on antibiotics and sulfonamides etc.

• Korean Journal of Environmental Agriculture
• /
• v.3 no.2
• /
• pp.9-15
• /
• 1984

Experiments were carried out with purified technical grade and two types of impregnated and sand-coated granules of carbofuran, in order to investigate the release patterns in water and the persistence of this chemical in soils. The results obtained are summarized as follows: 1) As regards to release velocity in water, impregnated granule was found to be faster than sand-coated granule. The time to reach maximum concentrations of carbofuran in water from technical carbofuran, impregnated granule and sand-coated granule was 0.5, 3 and 5 days, respectively. 2) Degradation rate of carbofuran in soils decreased in the order of technical carbofuran, impregnated granule, sand-coated granule regardless of soil types and application rates. Degradation of carbofuran in flooded soil was faster than in non-flooded soil. Soil flooding appeared to be the main factor in promoting the degradation of carbofuran in the soil. 3) When carbofuran was fortified in soils in the form of technical carbofuran, impregnated granule or sand-coated granule, the persistencies of two terminal residues of carbofuran, that is, 3-hydroxy carbofuran and 3-keto carbofuran decreased in the order of sand-coated granule, impregnated granule and technical form.

• The Korean Journal of Pesticide Science
• /
• v.3 no.1
• /
• pp.66-77
• /
• 1999

In order to elucidate the fate of the residues of the bipyridylium herbicide paraquat in soil, maize plants were grown for 4 weeks on the specially-made pots filled with two different types of soils containing fresh and 6-week-aged residues of [$^{14}C$]paraquat, respectively. The mineralization of [$^{14}C$]paraquat to $^{14}CO_{2}$ during the aging period and the cultivation period of maize plants amounted to $0.13{\sim}0.18%$ and $0.02{\sim}0.17%$, respectively, of the original $^{14}C$ activities. At harvest the roots and shoots contained less than 0.1% and 0.01% of the originally applied $^{14}C$ activities, respectively, whereas the $^{14}C$ activities remaining in soil were more than 97% in both soils. The water extractability of the soil where maize plants were grown for 4 weeks was less than 1.2% of the original $^{14}C$ activities. Most of the non-extractable soil-bound residues of [$^{14}C$]paraquat were incorporated into the humin fraction. Soil pHs during the aging of soil B and after cultivation in all treatments increased. The distribution of the $^{14}C$ activities in subcellular particles of the maize plant roots was the highest in the residue fraction(incompletely homogenized tissue). Dehydrogenase activities increased after vegetation, regardless of soil aging.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.455-467
• /
• 2017

In this study, a finite element analysis of a cylindrical multi-pass weldment for dissimilar metals was performed. The effects of the heat input method and weld bead generation method were considered. We compared two heat input methods: the heat flux method and the temperature method. We also compared two weld bead generation methods: the element birth method and the quiet element method. Although the results of the thermal analysis show deviations between the two heat input methods, the welding residual stresses were similar. Because the areas exposed to high temperature were similar and the strength of the material was very low in high temperature (above the $1000^{\circ}C$), the effects of the weld bead temperature were insignificant. The distributions of the welding residual stress were similar to each other. However, gaps and overlaps occurred on the welding boundary surfaces when the element birth method was applied. The quiet element method is more suitable for a large deformation model in order to simulate a more accurate weld shape.

• Journal of Applied Biological Chemistry
• /
• v.60 no.4
• /
• pp.301-306
• /
• 2017

This study was carried out to investigate the residual level of 5-methyl-1,2,4-triazolo[3,4-b][1.3] benzothiazole (tricyclazole) and the amount of transfer to Korean cabbage grown in treated soil with tricyclazole. The field trial on Korean cabbage was done at two different green houses located in Gwangju (Field 1) and Yongin (Field 2). Soil and cabbage samples were collected at different days after soil treatment of tricyclazole with two different concentration levels, respectively. Average recoveries of tricyclazole ranged from 83.5 to 92.1% in soil and cabbage and the variation coefficient was 1.3-6.8%. The initial concentrations of tricyclazole in field 1 soil were 4.25 and 8.97 mg/kg and decreased to 2.48 and 4.26 mg/kg at 43 DAT (day after treatment) and 0.88 and 2.02 mg/kg and decreased to 0.43 and 0.98 mg/kg at 36 DAT in field 2, respectively. The half-life of tricyclazole was about 39.6 and 28.1 days for the low and high concentration of tricyclazole treated soils in field 1 and 27.9 and 17.2 days for the low and high concentration of tricyclazole treated soils in field 2, respectively. Residual levels of tricyclazole in Korean cabbage were ranged from 4.03 to 18.26 and from 8.26 to 35.08% of initial concentration in filed 1 and field 2 soils, respectively.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.314-320
• /
• 2014

The uptake and transportation patterns of the residual boscalid and chlorfenapyr were investigated from the soils to Korean cabbages. The recovery rates of the pesticides spiked in the soils and Korean cabbages were 87.5 to 105.2%. Korean cabbages were cultivated in soils treated with two different concentrations of the pesticides as low (3.0 mg/kg) and high (6.0 mg/kg) concentrations in greenhouse for 28 days. The initial level of boscalid was determined as 2.77 and 5.66 mg/kg for the low and high concentration of boscalid-treated soils, respectively. After 28 days of treatment, the residual boscalid in soils decreased to 0.53 and 1.60 mg/kg for the low and high concentration of boscalid-treated soils, respectively, and thus it was reduced to 71.7 to 81.9%. The initial level of chlorfenapyr was determined as 2.38 and 6.43 mg/kg for the low and high concentration of chlorfenapyr-treated soils, respectively. After 28 days of treatment, the residual chlorfenapyr in soils decreased to 1.36 and 2.91 mg/kg for the low and high concentration-treated soils, respectively, and thus it was reduced to 42.9 to 54.8%. The residual pesticide analysis was done with 2 day intervals from 21 days-cultivated Korean cabbages after seeding. Uptake rates of boscalid from the soil to Korean cabbages were 2.4 and 2.2% for the low- and high-concentration of boscalid-treated soil, respectively. However, the uptake rate of chlorfenapyr by the cabbages was 1.5 and 1.3% for the low and high concentration-treated soil, respectively. The uptake rate of chlorfenapyr by the cabbages was lower than that of boscalid. These results showed that the residual pesticides in soil could be absorbed by Korean cabbages depending on their physicochemical properties.