• Title/Summary/Keyword: 잔류 구조

Search Result 767, Processing Time 0.03 seconds

A Simulation Study of Artificial Cochlea Based on Artificial Basilar Membrane for Improving the Performance of Frequency Separation (인공기저막 기반 인공와우의 주파수 분리 성능향상을 위한 인공기저막 전산모사)

  • Kim, Tae-In;Chang, Seong-Min;Song, Won-Joon;Bae, Sung-Jae;Kim, Wan-Doo;Cho, Maeng-Hyo
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.36 no.4
    • /
    • pp.457-463
    • /
    • 2012
  • The basilar membrane (BM), one of organs of cochlea, has the specific positions of the maximum amplitude at each of related frequencies. This phenomenon is due to the geometry of BM. In this study, as the part of the research for the development of fully implantable artificial cochlea which is based on polymer membrane, parametric studies are performed to suggest the desirable artificial basilar membrane model which can detect wider range of frequency separation. The vibro-acoustic characteristics of the artificial basilar membrane are predicted through finite element analysis using commercial software Abaqus. Simulation results are verified by comparing with experimental results. Various geometric shapes of the BM and residual stress effects on the BM are investigated through the parametric study to enable a wider detectable frequency separation range.

Differences of Zooplankton Development Along a Lake and a River Stretch of the River Spree (Germany) (스프리 강 (독일) 내의 호수와 강 구획에서의 동물플랑크톤 성장의 차이)

  • Joo, Gea-Jae;Walz, Norbert;Kim, Hyun-Woo
    • Korean Journal of Ecology and Environment
    • /
    • v.33 no.3 s.91
    • /
    • pp.197-205
    • /
    • 2000
  • Factors most strongly related to zooplankton growth rates were studied along a lake and a river stretch in the middle part of the lowland River Spree. The study was conducted at the lake inflow (S1), the lake outflow (S2), and at the end of a 21 km stretch of the outflow (S3) from March to November of 1999. Total zooplankton biomass increased significantly at S2 and then sharply decreased at S3. The abundance of microzooplankton (rotifers and nauplii) was strongly higher than macrozooplankton (cladocerans and copepodids) at all station. However, macrozooplankton biomass (${\mu}$g dw 1$^{-1}$) was similar or much higher than microzooplankton biomass. Large-bodied cladocerans (Daphnia cucullata) dominated at S2 while small-bodied cladocerans (Bosmina longirostris) dominated at S1 and S3. Patterns in growth rates (r$_{t}$ in d$^{-1}$ of the major zooplankton community were greatly different between S1 and S2 (lake stretch) and between S2 and S3 (river stretch). In the lake, growth rates generally were positive, while values of growth rates were negative in the river stretch. Among the environmental variables considered, partial retention time (PRT, d$^{-1}$) seemed to play the most important role in determining characteristics of the zooplankton community structure in the middle part of River Spree.

  • PDF

A study on the fabrication of $Pb(Fe^{0.5},Nb^{0.5}O_3$ thin films by a Co-sputtering technique and their characteristics properties (동시 스퍼터링법에 의한$Pb(Fe^{0.5},Nb^{0.5}O_3$박막의 제조 및 특성 평가에 대한 연구)

  • 이상욱;신동석;최인훈
    • Journal of the Korean Vacuum Society
    • /
    • v.7 no.1
    • /
    • pp.17-23
    • /
    • 1998
  • $Pb(Fe_{0.5}Nb_{0.5}O_3(PFN)$ thin films were prepared by rf magnetron co-sputtering method on $SiO_2/Si$, ITO/glass, and $Pt/Ti/SiO_2/Si$ substrates and post-annealed at the $N_2$ atmosphere by RTA(rapid thermal annerling). The degree of crystallinity of PFN films was identified on various substrates. Electrical properties of PFN films was characterized for $Pt/PFN/Pt/Ti/SiO_2/Si$ structure. The composition of PFN films was estimated by EPMA (electron probe micro analysis). PFN films would be crystallized better to perovskite phase on ITO/glass substrate than $SiO_2/Si$ substrate. This may be induced by the deformation of Pb deficient pyrochlore phase due to Pb diffusion into $SiO_2/Si$ substrate. PFN films on $Pt/Ti/SiO_2/Si$ substrate. PFN films with 5-10% Pb excess were crystallized to perovskite phase from $500^{\circ}C$ temperature. In summary, we show that Pb composition and annealing temperature were critically influenced on crystallinity to perovskite phase. When PFN film with 17% Pb excess was annealed at $600^{\circ}C$ at the $N_2$ atmosphere for 300kV/cm and 88. Its remnant polarization coercive field $2.0 MC/cm^2$ and 144kV/cm, respectively.

  • PDF

Saline Water Treatment by Underwater Plasma

  • Yu, Seung-Min;Yu, Seung-Yeol;Park, Jun-Seok;Hong, Eun-Jeong;Hong, Yong-Cheol;Lee, Sang-Ju;Kim, Ye-Jin;No, Tae-Hyeop;Lee, Bong-Ju
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.19-19
    • /
    • 2011
  • 수중방전은 다양한 라디칼을 직접 물 속에서 발생시키기 때문에 수처리 공정에 다양한 응용이 가능하다. 특히, 최근에 선박평형수 등의 살균이 국제적인 이슈가 되고 있고, 2017년까지는 모든 선박에 살균을 위한 수처리 설비가 의무화된다. 본 연구에서는 염분이 있는 수체에서의 방전공정을 연구하고 이를 수처리공정에 적용할 수 있는 방법에 대해 연구하였다. 해수의 경우 전도도가 53mS로 자유로운 전하의 이동이 가능하기 때문에 일반적인 민물방전의 전원과 전극 등으로는 방전을 할 수 없다. 이에 세라믹과 금속의 이중구조로 되어 있는 모세관전극을 개발하여 전도성이 있는 수체에서의 방전을 이루었다. 전원장치로는 60 Hz, 380 V를 1차측에 인가하여 2차측에서 약 3 kV, 10 kW의 파워가 발생하는 12위상차 교류전원장치를 개발하여 사용하였다. 모세관 내부에 전압이 인가되면 전류가 발생하여 joule heating에 의하여 모세관 내부에 기포가 형성된다. 이 때, 전류의 단락이 이루어지면서 고전압쪽에 전하가 축적되며 기포내부의 E-field가 상승한다. 이후 기포 내에서 방전이 개시되며 각종 라디칼을 생성한다. 방전에 의해 생성되는 산화제로는 오존, OH라디칼, 과산화수소 등이 있으며, 해수에서는 Cl-의 결합에 의하여 Cl2 가스가 발생한다. 약 30,000 J/L의 체적에너지에 대하여 생성되는 총염소의 농도는 2.5 mg/L이다. 수중방전의 적용대상으로 선박평형수, 멤브레인과의 결합, 용존기포부상법을 선정하여 적용가능성을 연구하였다. 먼저 선박평형수 살균처리를 위해 해수의 처리유량을 20 lpm으로 유지하고 대장균, 바실러스, 조류(테트라셀미스) 등을 투입하여 전극 12개가 삽입된 12위상차 플라즈마 반응기를 통과시켰더니, 약 30,000 J/L의 체적에너지에 대하여 1일 후의 살균력이 각각 99.99, 99.99, 99.9%의 살균력을 나타내었다. 이는 국제해사기구에서 권장하는 살균수준인 99.9%를 초과하는 수치이다. 플라즈마를 이용한 해수살균공정의 안정적 운전을 위해 후단에 UF멤브레인을 추가하여 잔류생존 미생물을 제거할 수 있다. 이를 위해 플라즈마가 후단의 멤브레인 운전에 미치는 영향을 평가하였다. 카올린과 탄산칼슘을 오염원으로 각각 투입하여 멤브레인으로 처리를 하였을 때, 방전 직후 멤브레인에 걸리는 막간압력차가 약 30% 감소하였는데, 이는 막에 형성된 파울링이 방전에 의해 제거된 것으로 평가할 수 있다. 수중방전은 다양한 산화제를 생성함과 동시에 미세기포를 발생시키는데 이는 수중유기물의 부상분리에 적용될 수 있다. 방전모세관전극의 내부직경을 1 mm로 유지하고, 60 Hz, 교류전원으로 방전한 결과 평균입경 44 um의 기포를 발생시켰고, 이는 일반적으로 용존공기부상법에 사용되는 기포의 크기와 일치한다.

  • PDF

Influence of 3-N-Substituents(R) on the Insecticidal Activities of Imidacloprid and Its Analogous (Imidacloprid와 그 유도체들의 살충활성에 미치는 3N-치환기(R)의 영향)

  • Kang, Moon-Sung;Jang, Hae-Sung;Kim, Dae-Whang;Sung, Nack-Do
    • Applied Biological Chemistry
    • /
    • v.39 no.2
    • /
    • pp.140-146
    • /
    • 1996
  • Imidacloprid and a series of the related compounds were synthesized, and influence of 3-N substituents(R) on the insecticidal activities against Brown plant hopper(Nilaparvata lugens) and Green peach aphid(Myzus persicae) were examined quantitatively from the structure-activities relationships(Shh) techniques. The results indicated that the molecular hydrophobicity$({\pi})$ and inductive substituent constant$({\sigma}^{\ast})$ of substituents(R) at 3-nitrogen position on the imidazolidine ring were important factors. Variations in the potency were parabolically related to the both constants. In case of Brown plant hopper, optimum value of ${\pi}$ constant was 0.52, whereas the value of ${\sigma}^{\ast}$ constant against Green peach aphid was 1.17, respectively. Among them, the strong electron withdrawing groups$({\sigma}^{\ast}>0)$ such as methyl and benzenesulfonyl group(7 & 8) showed lower insecticidal activity and non-substituted, 1(imidacloprid) showed the best insecticidal activity. It seems that the intramolecular associated(H-bond) form between 2-N-nitro group and 3-imid group may contribute to the higher insecticidal activity to the both sucking insects. And in aqueous solution, 1 showed higher residual activity below pH 6.0, and the half-life$(T_{1/2})$ was about 6 month at pH 7.0 $(ca.\;k_{obs.}:5{\times}10^{-8}sec.^{-1})$ and $45^{\circ}C$.

  • PDF

The effect of heat input and PWHT on the mechanical properties and microstructure of HSB600 steel weldments with GMAW (HSB600강 가스메탈아크용접부에서 입열량과 용접후 열처리가 기계적 특성과 미세조직에 미치는 영향)

  • Ju, Dong-Hwi;Jang, Bok-Su;Lim, Young-Min;Koh, Jin-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.5
    • /
    • pp.1939-1946
    • /
    • 2012
  • High performance steel for bridges requires higher performance in tensile and yield strength, toughness, weldability, etc. The purpose of this study is to investigate the weldability of HSB 600 steel. The effects of heat input (1.4~3.2kJ/mm) and postweld heat treatment (PWHT, $600^{\circ}C$, 40hr.) on the TMCP HSB600 steel weldments made by GMAW process were investigated. The tensile strength and hardness of as-welded specimens decreased with increasing heat input. Charpy V-notch impact energy did not show any significant difference by postweld heat treatment. The fine-grained acicular ferrite was mainly formed in the 2.1kJ/mm of heat input while polygonal and side plate ferrites were dominated in the high inputs. Meanwhile, tensile strength and hardness of PWHT weldments decreased due to the coarsening and globularization of ferrite microstructure and reduction of residual stresses with increasing heat inputs. However, there was no significant difference in the impact energy absorption.

Cyclic Simple Shear Test Based Design Liquefaction Resistance Curve of Granular Soil (반복단순전단시험에 기반한 조립토의 설계 액상화 저항 곡선 개발)

  • Saeed-ullah, Jan Mandokhail;Park, Duhee;Kim, Hansup;Park, Ki-Chun
    • Journal of the Korean Geotechnical Society
    • /
    • v.32 no.6
    • /
    • pp.49-59
    • /
    • 2016
  • We develop liquefaction resistance curves, which represent the correlation between cyclic resistance ratio (CRR) and number of cycles (N) to estimate the build-up of residual excess pore pressure from simple shear tests performed for this study and also from published literature. The liquefaction curve is calculated from two models. The comparisons show that one of the models is not reliable because it underestimates CRR. The scatter of the data is shown to be significantly reduced when CRR is normalized to the resistance ratio at N = 15 ($CRR_{N=15}$). Use of the normalization is particularly useful because CRR can be easily estimated from field tests. From normalization, we propose mean, upper, and lower curves. The corresponding design equation and its parameters are also proposed. We believe that the proposed curves can be used for effective stress site response analyses and evaluation of the seismic performance of port structures.

Application of Fluorescence Polarization Immunoassay for the Screening of Ochratoxin A in Unpolished Rice (현미에서의 오크라톡신 A의 검색을 위한 형광편광면역분석법의 응용)

  • Park, Jung-Hyun;Chung, Duck-Hwa;Lee, In-Seon
    • Journal of Life Science
    • /
    • v.16 no.6
    • /
    • pp.1006-1013
    • /
    • 2006
  • To High Throughput Screening (HTS), a homogeneous fluorescence polarization immunoassay (FPIA) was developed for the quantitative determination of ochratoxin A(OTA) using a $Victor^3$ (PerkinElmer). The homologous tracer, fluorescein-labelled OTA-EDF were synthesized and a specific OTA antibody has been used in the development of the method. It allowed the determination of OTA in the concentration range 0.5-200 ng/ml, with the detection limit of 0.3 ng/ml. The method developed was highly specific and reproducible. OTA spikes in unpolished rice extracts were determinable by FPIA with good recovery. For naturally contaminated unpolished rice samples some disagreement was observed between the results obtained by FPIA and HPLC, which could be related to the a little matrix effect observed for FPIA. Further research is needed to validate the procedure. On the basis of these initial results, this FPIA appears to meet the performance criteria for OTA screening of food samples without a complicated clean-up.

Characteristics and Causes of Wave-Induced Settlement in Caisson Breakwater: Focusing on Settlement Data (파랑에 의한 방파제 케이슨 침하 경향 및 원인 분석: 침하 계측자료를 중심으로)

  • Kim, Tae-Hyung;Nam, Jung-Man;Kim, In-Sok;Yun, Seong-Kyu
    • Journal of the Korean Geotechnical Society
    • /
    • v.30 no.7
    • /
    • pp.27-40
    • /
    • 2014
  • So far, studies on the settlement of breakwater have mainly been conducted through numerical model tests focusing on an analysis or through the laboratory wave tank tests using a scaled model. There has not been a study on the settlement that is measured in an actual breakwater structure. This study analyzed the data of settlement that has been measured in an actual caisson breakwater for a long time and the characteristics and causes of wave-induced settlement in the caisson (including beneath ground), based on qualitative aspect, were examined. The analysis revealed that wave clearly has an effect on the settlement in caisson, especially in the condition of high wave such as typhoon. Caisson settlement is caused by the liquefaction of ground, which is due to the increase of excess pore pressure, the combination of oscillatory excess pore pressure and residual excess pore water pressure, and the solidification process of ground due to dissipation of the accumulated excess pore pressure. The behavior of excess pore pressure in the ground beneath the caisson is entirely governed by the behavior of the caisson. Ground that has gone through solidification is not likely to go through liquefaction in a similar or a smaller wave condition and consequently, the possibility of settlement is reduced.

Emerging Media Conglomerates and Producers' Exodus: The Dynamics of Creativity Relocations in the South Korean Broadcasting Production Sector after the Introduction of New General Programming Channels (신규 복합 미디어 기업의 부상과 제작자 엑서더스: 종합편성채널 승인 이후 방송제작 부문의 창의성 재배치 동학)

  • Jung, June-Hee
    • Korean journal of communication and information
    • /
    • v.66
    • /
    • pp.28-58
    • /
    • 2014
  • South Korean broadcasting industry has been under a significant level of structural change since the permission of new general programming channels in the end of 2010. One of the most characteristic features of the change may be the exodus of core manpower from the in-house productions of major terrestrial broadcasters which have been maintaining their dominant power over broadcasting content market based on their systems of tight vertical integration. This paper sheds light on the presence of a purposeful 'mechanism design' that aims to the expansion of market logics in South Korean broadcasting sector by promoting commercial media conglomerates, and analyses how this external design has been actualized while being interlocked with various internal factors of the broadcasting industry. This paper shows that on the backdrop of the mechanism design, some of new media conglomerates has successfully provided various incentives in contrast with those disincentive of terrestrial broadcasters, which in turn, has facilitated the exodus of elite producers. This paper, however, raises a set of questions about whether this relocation process of creativity led by commercial media conglomerates would, in the long term, guarantee more opportunities and potentials for the producers, as promised. As part of conclusion, inherent problems of present mechanism design are highlighted.

  • PDF