• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.169-169
• /
• 2010

박막형 CIGS 태양전지의 배면전극으로 사용되는 Mo 박막은 낮은 저항으로 인한 전기전도성과 열적 안전성이 아주 우수하다. 연구에서는 연성 CIGS 태양전지의 제조를 위한 Mo 배면전극의 대면적 증착기술에 관한 것으로 DC Magnetron Sputtering 공정을 이용하여 전주기술을 통한 Ni-Fe계 연성기판재 위에 졸걸법으로 합성된 $SiO_2$ 절연박막에 Mo 박막을 증착하는 것을 목적으로 하고 있다. 실험에서는 연성기판재 대신 시편을 Sodalime glass, Si wafer, SUS계 소재를 사용하여 스퍼터링 공정에 의한 Mo 박막을 증착하였다. 실험에서 타겟에 인가되는 전력과 공정압력을 변수로 하여 Mo 박막의 증착율, 전기저항성을 측정하였다. 타겟의 크기는 $80mm{\times}350mm$, 타겟과 기판간 거리 20cm 이었으며, 공정 압력은 2~50 mtorr 영역에서 인가전력을 0.5-1.5kW로 하였다. Mo 박막의 증착율과 전기적 특성을 측정하기 위하여 $\alpha$-step과 4-point probe(CMT-SR 1000N)를 이용하였다. 그리고 Mo 박막의 잔류응력을 측정하기 위하여 잔류응력측정기를 이용하였다. Mo 박막의 미세구조분석을 위하여 SEM 및 XRD를 분석을 실시하였다. 배면전극으로서 전기저항성은 공정압력에 따라 좌우 되었으며, 2 mTorr 공정압력과 1.5kW의 전력에서 최소값인 $8.2\;{\mu}{\Omega}-cm$의 저항값과 증착율 약 $6\;{\mu}/h$를 보였다. 기판재와의 밀착성과 관련한 잔류응력 측정과 XRD분석을 통한 결정립 크기를 분석하여 공정압력에 따른 Mo 박막의 잔류응력과 전기 저항 및 결정립 크기의 상관관계를 조사하였다. 그리고 대면적 CIGS 증착공정을 위해 직각형 타겟을 통해 증착된 Mo 박막의 증착분포를 20cm 이내 조사하였다.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.23-29
• /
• 2016

This study was carried out to survey residual characteristics of pesticide in fresh ginsengs collected from 45 markets at 15 regions in Korea using multiresidue analysis with a GC-MS/MS and an LC-MS/MS. After residue analysis was performed, the pesticides detected from ginsengs were quantitated using their analytical methods validated by recovery tests with a GC-ECD/NPD. As a results of analysis of pesticide residue, cypermethrin, fenitrothion, fludioxonil, thifluzamide, and tolclofos-methyl were detected from 16 samples among 45 samples in total, indicating detection rate was 35.6%. Tolclofos-methyl was found to be highest in detection frequency in ginseng. Fenitrothion that has not established maximum residue limit and pre-harvest interval for ginseng was detected. The amounts of all pesticides detected were less than their MRLs. Ratios of estimated daily intakes to acceptable daily intakes of the detected pesticides in ginseng were found to be from 0.03 to 16.67%.

• The Korean Journal of Pesticide Science
• /
• v.13 no.1
• /
• pp.28-38
• /
• 2009

An extrapolation of residue data of seven commonly used pesticides namely bifenthrin, chlorothalonil, cypermethrin, diazinon, fenvalerate, phenthoate and procymidone on a total of 22 minor crops has been carried out in an experimental field trial. The pesticides were applied to 11 leafy-, 5 root- and 6 stem-crops grown in the experimental green-house and the crops and plants were randomly collected at 1, 3, 5, 7 days after application. The average recoveries of applied pesticides were ranged from 72.0 to 117.0% in leafy crops, from 81.3 to 105.0% in stem crops and from 70.1 to 108.1% in the root-crops. Limits of detection (LODs) were 0.005-0.1 mg/kg in the leafy crops and 0.001-0.005 mg/kg in both the stem & root crops. Based on the results of residual dissipation pattern and their morphology, all crops were classified into high and low residual groups. The results showed that it might be possible to extrapolate residual data of stem-crops to root-crops within the same group. Crops that have currently no registered pesticide for use, would be possible to use the pesticides which are already been registered for the similar crops.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.137-143
• /
• 2020

To ensure safety of raw materials for military foods, hazard assessment and monitoring of residual pesticides was conducted on agricultural products consumed by 9 companies based in Gyeongin and Gangwon. Residual pesticides were analyzed for 142 different products, by applying the multi-species pesticide polycomponent analysis method. Of the 36 samples analyzed, residual pesticides were detected in 7 samples, representing a detection rate of 19.4%. One particular pesticide residue was detected in peanuts, green onions, and red pepper powder, and 20 types of pesticide residues were detected in red pepper powder used in combat foods. However, all residues were found to be below the permissible level. Moreover, the hazard assessment results for Cypermethrin, Tebuconazole and EPN showed the highest concentration among the residual pesticides detected. Since the estimated intake was less than 100% as compared to the ingestion limit, it was considered to be safe. I have suggested the edit as per my understanding. Please review for accuracy, and revise appropriately if required. This is the first pesticide Risk Assessment study encompassing military requirements. Considering the results, we expect further application research, including research on reducing hazardous materials.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.98-104
• /
• 2009

This study was carried out to investigate the residue patterns of two neonicotinoid insecticides, dinotefuran and thiacloprid, commonly used for cucumber, were subjected to indicate a residual characteristic under greenhouse conditions. The pesticides were sprayed onto the crop at recommended and double doses 7 days before harvest and then sampling was done 0, 2, 3, 5, and 7 days after spraying. The amounts of their residues in the crop were analyzed with an HPLC. Their detection limits were 0.01 mg/kg for dinotefuran and 0.005 mg/kg for thiacloprid. Mean recoveries of dinotefuran and thiacloprid were from 85.78 to 89.52 and from 85.71 to 95.31%, respectively. Half-lives of dinotefuran and thiacloprid were 2.8 and 1.8 days at the recommended dose and 2.8 and 1.5 days at the doubled dose, respectively. The ratios of the EDI to ADI by intake the crop harvested 7 days after spraying were less than 0.1% of their ADIs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.179-179
• /
• 1998

실리콘 집적회로 제조시 sub-micron 의 contact 형성 공정은 질연막 형성 후 이의 식각 및 세정, c contact 실리사이드, 획산방지막, 배선 금속층의 형성 과정올 거치게 된다. 본 연구팀에서는 C.F야f2 헬리 콘 플라즈마훌 이용한 고선택비 contact 산화막 식각공정시 형성된 잔류막충과 오염 손상올 관찰하고 산소 플라즈마 처리와 후속 열처리에 따른 이들의 제거 정도를 관찰하여 이에 대한 결과를 발표하였다. 본 연구메서는 식각 및 후처리에 따라 잔류하는 잔류막과 손상층이 후속 공정인 contact 실리사이드 형 섬에 미치는 영향올 관찰하였다. C C.F바f2 웰리콘 풀라즈마률 이용한 식각시 공정 변수로는 수소가스 첨가, bias voltage 와 과식각 시간 의 효과를 관찰하였으며 다른 조건은 일정하게 하였다 .. Contact 실리사이드로는 Ti, Co-싫리사이드를 선 택하였으며 Piranha cleaning, 산소 플라즈마 처리, 산소 풀라즈마+600 'C annealing으로 각각 후처리된 시 편을 후처리하지 않은 시펀돌과 함께 실리사이드 형성용‘시펀으로 이용하였다 각각 일정 조건에서 동 일 두께의 실리사이드훌 형성시킨 후 4-point probe룰 이용하여 면저황올 측정하였다 후처리하지 않은 시편의 경무 실리사이드 형성은 아주 시펀의 일부분에서만 형성되었으며 후속 세정 및 얼처리훌 황에 따라 실리사이드의 면저항은 감소하여 식각 과정을 거치지 않은 깨끗한 실리콘 웨이퍼위에 실리사이드 를 형성시킨 값(control 값)에 접근하였다. 실리사이드의 면저항값은 식각시 노훌된 실리콘 표면 위에 형 성된 손상충보다는 잔류막에 큰 영향을 받았으며 수소 가스가 첨가된 식각 가스로 식각한 시편으로 형 성한 실리사이드의 면저항값이 손상이 상대적으로 적은 것으로 관찰된 수소훌 첨가하지 않은 식각 가 스로 식각한 시펀 위에 형성된 실리사이드의 면저황에 비해 낮은 값을 나타내었다. 실리사이드의 전기적 륙성에 미치는 손상층의 영향올 좀더 면밀히 관찰하고자 bare 실리콘 wafer 에 잔류막이 거의 없이 손상층을 유발시키는 식각 조건들 (100% HBr, 100%H2, 100%Ar, Cl싸fz)에 대하여 실 리콘 식각을 수행한 후 Co-실리사이드률 형성하여 이의 면저황을 측정한 걸과 100% Ar 가스로 식각된 시편을 이용하여 형성한 실리사이드의 면저항은 control 에 기까운 면저항값올 지니고 따라서 손상층이 실리사이드 형섬메 미치는 영향은 크지 않음을 알 수 있었다. 이상의 연구 결과훌 통해 손상층이 실리사이드의 형성이나 전기적 톡섬에 미치는 영황은 잔류막층 에 의한 영향보다 적다는 것을 알 수 았으며 잔류막층의 두께보다는 성분이나 걸합상태, 특히 식각 및 후처리 후 잔류하는 탄소 싱분과 C-Si 결함에 큰 영향올 받는 것올 알 수 있었다.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.30-39
• /
• 2019

An analytical method was developed for the determination of sedaxane in agricultural products using liquid chromatograph-tandem mass spectrometry (LC-MS/MS). The samples were extracted with acetonitrile and partitioned with dichloromethane to remove the interference, and then purified by using silica SPE cartridges to clean up. The analytes were quantified and confirmed by using LC-MS/MS in positive ion mode using multiple reaction monitoring (MRM). The matrix-matched calibration curves were linear over the calibration ranges ($0.001-0.25{\mu}g/mL$) into a blank extract with $r^2$>0.99. For validation, recovery tests were carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ, n=5) with five replicates performed at each level. The recoveries were ranged between 74.5 to 100.8% with relative standard deviations (RSDs) of less than 12.1% for all analytes. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40, 2003) and Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for sedaxane determination in agricultural commodities.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.79-88
• /
• 2023

Trifludimoxazin is a triazinone herbicide that inhibits the synthesis of protoporphyrinogen oxidase (PPO). The lack of PPO damages the cell membranes, leading to plant cell death. An official analytical method for the safety management of trifludimoxazin is necessary because it is a newly registered herbicide in Korea. Therefore, this study aimed to develop a residual analysis method to detect trifludimoxazin in five representative agricultural products. The EN method was established as the final extraction method by comparing the recovery test and matrix effect with those of the QuEChERS method. Various sorbent agents were used to establish the clean-up method, and no differences were observed among them. MgSO₄ and PSA were selected as the final clean-up conditions. We used LC-MS/MS considering the selectivity and sensitivity of the target pesticide and analyzed the samples in the MRM mode. The recovery test results using the established analysis method and inter-laboratory validation showed a valid range of 73.5-100.7%, with a relative standard deviation and coefficient of variation less than 12.6% and 14.5%, respectively. Therefore, the presence of trifludimoxazin can be analyzed using a modified QuEChERS method, which is widely available in Korea to ensure the safety of residual insecticides.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.259-271
• /
• 1993

The distributions of bottom sediments and the depositional processes on the continental shelves of Korean Seas are interpreted. Generally the continental shelf sediments can be classified into the sand-facies and mud-facies, showing the typical bimodal size distributions Most of the sandy and gravelly sediments on the outer shelf floor are interpreted as "relict" sediments that were deposited during the last glacial times when the sea level was lower than the present. On the other hand the muddy sediments on the inner shelf area are interpreted as "recent" sediments that are deposited under the present environment conditions. It is understood that most of the fine materials cannot escape the inner shelf area due to the strong tidal and coastal fronts, and are transported eastward from the West Sea along the southern coast of Korean Peninsula. The dark-colored muddy sediments in the Hupo Basin of the East Sea are, however, considered to be "relict" sediments. In the midshelf area fine materials are mixed with the relict coarse sediments, and some of the relict sediments are continuously reworked under the present environmental conditions forming the "palimpsest" sediments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.565-572
• /
• 2009

This work intends to establish the reliability and fracture toughness $K_{IC}$ criterion of welded joints by EGW for high strength EH36-TMCP ultra thick plate. For this, firstly thermo elasto-plastic analysis has been carried out on two pass X-groove butt joint model to clarify the thermal and mechanical behaviour(residual stress, plastic strain, magnitude of stress and their distribution and production mechanism). Moreover, to establish fracture criterion, analysis of fracture toughness $K_{IC}$ has been performed under the notch machined and residual stress with the load condition on EGW welded joints. A quantitative fracture criterion for EGW welded joints is suggested by using $K_{IC}$.