• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.50-50
• /
• 2002

탄소 박막은 내마모, 화학적 생물학적 적합성 둥의 특성으로 언하여 많은 연구자들레 의하 여 연구되어지고 있다. 그러나 탄소 박막의 경우 높은 잔류응력과 이에 따른 낮은 밀착력으 로 언하여 증착 두께에 제한이 되어왔다. EB-PVD법을 이용하여 탄소막을 증착하는 경우 이러한 문제점을 해결하기 위하여 탄소막에 제 2의 금속원소를 첨가하거나 화합물 형태의 증착원 이용, 복합공정 (Hybrid process)을 통하여 증착 두께 의 제 한을 극복하고자 하는 연 구가 계속되고 있다. 본 연구에서는 탄소막의 잔류응력 제어와 증착 두께를 높이기 위하여 Plasma Activated E E-Beam Evaporation을 통하여 탄소막을 증착하였다. 탄소막 증착시 잔류응려과 밀착력에 대한 플라즈마의 영향올 알아보기 위하여 RF 플라즈마의 인업 전력에 따라 실험을 수행하였으며 필라멘트 전자 방출원을 이용하여 플라즈마 밀도가 미치는 영향도 알아보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.401-408
• /
• 2009

This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.61-66
• /
• 2008

This study is performed to compare characteristics of various measurement technique for weld residual stress. AISI 304 plate with one path weld on the surface was manufactured for this study. Hole drilling method, X-ray diffraction method and instrumented indentation method were used to measure the residual stress before and after welding. All the results were compared and analyzed.

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.237-240
• /
• 1999

In this study, residual stresses of the weldment were calculated by finite element analysis(FEA) and experiment. And, the crack closure behaviour and fatigue crack growth characteristics in field of residual stress of A106 Gr B steel pipe weldment were investigated under various stress ratio. Obtained results are as follows. I) $K_{op}$ was independent of $K_{max}$, and load ratio in fatigue crack growth. 2) In variation of load ratio, the scatter band of crack growth curve was reduced by half considering crack closure. and 3) Neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated' and Actual fatigue crack growth rate can be overestimated by $K_{res}$, in tensile residual stress field.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.110-117
• /
• 2001

In the weldments, the crack propagation rate is changed due to the residual stress. The crack propagation rate is high in the region with the residual stress. However it shows the same behavior with the base metal in the region that does not include the residual stress. The fatigue crack growth rate for the material with residual stresses can be predicted more precisely by using the effective stress ratio. The difference between experimental results and prediction results seems to be due to the redistribution of the residual stresses and microstructural change.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.97-105
• /
• 2017

This study was carried out to determine residual characteristics and to evaluate safety of bifenthrin, carbendazim and metconazole in minor crop, Angelica gigas Nakai. The test pesticides were sprayed onto the crop according to the combinations of spray days before harvest and frequency and then sampling was performed at the harvest day. Non-systemic pesticide bifenthrin was not detected in all samples, whereas systemic pesticides, carbendazim and metconazole, were detected from the crop in the range of from 0.14 to 0.49 and from 0.19 to 0.26, respectively. These results indicated that residual characteristics of the test pesticides in Angelica gigas Nakai were affected by their systemic properties. Also, residual concentration of carbendazim and metconazole in the crop was increased as more spraying frequency and spraying more closer to harvest day. And residual concentration of carbendazim in the crop on the last spraying day was 2.1 times higher than that of metconazole because nominal spraying dose of carbendazim was higher than that of metconazole by 1.9 times. The residue levels of the test pesticides in the crop were evaluated to be safe, considering their %ADIs were less than 0.9%.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.236-241
• /
• 2012

The characteristics of chlorpyrifos was studied to clarify the effect of the cultivation season, spray intervals, spray volume and concentration on residues in chilli and sweet peppers cultivated under greenhouse condition. Residue levels of chlorpyrifos detected in chilli pepper fruit cultivated were 1.5 to 2.7 times higher in winter(February-March) than those in summer(June-July). During winter season residue levels of chlorpyrifos in chilli peppers were 6.9~3.2 times higher than those in sweet peppers for 10 days after 3 times application with 7 days interval. Residue levels in chilli pepper were from 2.070 mg/kg at 1 day to 0.929 mg/kg at 10 day, while those in sweet pepper were from 0.302 mg/kg to 0.291 mg/kg. Residue levels in sweet pepper to which are 3 times applied with 7 days interval were from 0.302 mg/kg at 1 day to 0.291 mg/kg at 7 day, and the residue levels in sweet pepper which are 3 times applied with 3 days interval were from 0.498 mg/kg at 1 day to 0.470 mg/kg at 7 day. Residue levels of chlorpyrifos in the sweet peppers applied by double concentration were 2.5 times higher than those sprayed by normal standard amounts diluted in double volume.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.71-76
• /
• 2014

In this paper, we propose a SMMA(Sliced-Multi Modulus Algorithm) adaptive blind equalization algorithm with Flag for high order QAM system. SMMA has improved characteristics by applying the multi contour to MMA. However, SMMA still has a limit that the mismatch problem causes the residual error in the steady state is large. In order to significantly reduce the residual error in the steady state, we propose SMMA, which is controlled by the binary Flag of '1 'or '0' obtained from SMMA and a decision-directed algorithm, and analyze the performance of the proposed algorithm. By computer simulation, it is confirmed that the proposed algorithm has improved performance highly in terms of a residual ISI and a residual error in the steady state compared with MMA and SMMA.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.908-913
• /
• 1997

플라즈마 화학 증착 방법에 의해 corning 7059 유리기판위에 비정질 실리콘 박막을 만들고 고온열처리, 다단계급속열처리, 일차원 선형빔(line shape beam)의 가우스 분포를 가지는 엑시머 레이저 열처리를 이용하여 고상 및 액상의 재결정화를 통해 다결정 실리콘 박막을 제작하였다. 편광된 라만 분광학(Raman spectroscopy)을 통하여 여러 가지 열처리 방법과 기판온도에 따른 다결정 실리콘 박막의 잔류응력을 조사하였다. 레이저 열처리에 의하여 결정화된 실리콘 기판의 경우, 높은 결정화된 체적량과 잔류응력을 갖으며 equaxial결정성을 갖는다. 그러나 이러한 고상 재결정화된 다결정 실리콘 박막은 라만스펙트럼에서 480$cm^{-1}$ /주위에 넓게 퍼져있어 비정질상(amorphous phase)이 함께 존재함을 알 수 있다. 고온열처리와 다단계급속열처리의 경우 잔류응력의 크기는 각각 4.07x$10^{9.}$과 4.56x$10^{9 dyne}$ $\textrm{cm}^2$이다. 또한 엑시머레이저 열처리의 경우 기판온도가 상온에서 40$0^{\circ}C$로 증가할수록 열적인 완화에 의해 잔류응력이 1.35x$10^{10}$에서 8.58x$10^{9}$dyne/$\textrm{cm}^2$으로 감소하는 것을 알 수 있다.다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.439-442
• /
• 2009

In this study, the residual strength of CFRP filament winding pressure vessel after low velocity impact was evaluated quantitatively. After impact test, the pressure vessel was sectioned to produce 25 mm-wide ring specimen and the bursting pressure of this specimen was measured. A finite element model was also fabricated to investigate the deformation and stress distribution characteristics of the impacted CFRP vessel. The degradation of the residual strength along with the increase of impact energy was successfully measured and reviewed.