• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.723-728
• /
• 2019

Citizens' distrust of water pollution is very high in tap water that we routinely drink. In addition, water pollution accidents of tap water are difficult to predict and the risk is high, so real-time monitoring and management are needed. Therefore, it is necessary to introduce real-time water quality monitoring using the Internet of things(IoT). Residual chlorine is more persistent and economical than other disinfectants and it is easy to check residual effect, so it is mainly used as a disinfection index in waterworks. It can be monitored in real time by using IoT technology in order to secure the safety of tap water. In this study, we developed smart device for real-time water quality monitoring using amperometry sensor and analyzed its performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.89-95
• /
• 2016

In this paper, we propose a dual-mode blind equalization algorithm that two of the blind equalization algorithm using the size of the decision-directed error signal is automatically switched. The proposed algorithm has a faster convergence speed due to operation of the MSAGF-SMMA with large fixed step-size mainly in the initial equalization. After the equalization has been made to some extent, the proposed algorithm has a smaller residual error in the steady- state by operation of the MSAGF-SMMA with a variable step-size mainly. The variable step-size is determined by multiplying the size of the decision-directed error signal of a fixed step-size. In this paper, we analyze the performance of the proposed algorithm. The computer simulation results demonstrate that the proposed algorithm has a significantly improved performance in terms of a residual inter-symbol interference and residual error in the steady-state compared with the MMA, SMMA, and MSAGF-SMMA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.61-67
• /
• 2006

This paper proposes the algorithm for tracking of the residual phase errors incurred by carrier frequency offset and sampling frequency offset in the orthogonal frequency division multiplexing (OFDM) systems which are suitable for high data rate wireless communications. In the OFDM systems the subcarriers which are orthogonal to each other are modulated by digital data and transmitted simultaneously. The carrier frequency offset causes degradation of signal to noise ratio(SNR) performance and interference between the adjacent subcarriers. The errors in the sampling timing caused by the sampling frequency difference between the transmitter and the receiver sides also cause a major performance degradation in the OFDM systems. The residual error tracking and compensation mechanism is essential in the OFDM system since the carrier and the sampling frequency offset cause the loss of orthogonality resulting in the system performance loss. This paper proposes the scheme where the channel gain and the payload data information are reflected in the residual error tracking process which results in the reduction of the estimation error and the tracking performance improvements under the frequency selective fading wireless channels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.793-802
• /
• 2022

Non-structural improvements to urban drainage systems are necessary to overcome the elevated levels of urban flood damage. This study proposed a type of automatic pump/gate operation technology for urban pump stations that takes reservoir inflows and river water levels into account and its performance is compared with the current operation using the concept of residual flow-based resilience. The proposed automatic operation relies on three pump operations and two gate operations. The water depth at the monitoring node was used for the pump operation, and the monitoring node was selected in consideration of the first overflow node and the maximum overflow node. The target area is the Daegu Bisan urban pump station, and the rainfall data consisted of probability rainfall sets with durations of 30 minutes, 60 minutes, 90 minutes and 120 minutes, and frequencies of 30, 50, and 70 years. As a result of the application of the proposed operation, differences in the resilience between the automatic operation and the current operation were at least 5.20E-05 with a maximum of 8.07E-04. The longer the duration is, the greater the difference in the resilience.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.20-26
• /
• 2014

This paper represented the finite element analysis to estimate structural performance of stress-laminated deck, which is determined by deflection, stress, and aging characteristics of tensioning. After loading, the deflected shape showed plate behavior because pre-stressing make frictional force between each member. Compared between initial post-tension and the results, pre-stressing forces were decreased with deck deflection. This is because deflection occurred in the deck so that pre-stressing decreased due to load reduction. However, material plasticity was not considered so that advanced researches should be performed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.99-104
• /
• 2015

This paper proposes the RMMA (Region based Multiple Modulus Algorithm) algorithm that is possible to improving the performance of MMA adaptive equalization algorithm in order to the reduction of intersymbol interference occurs at the communication channel. In RMMA algorithm, the output constellation of equalizer are divided by 4 different regions in order to get the error signal for adapting the channel characteristic, and the small error signal is obtained by mapping each region to 4-QAM signal. The conversion effect of constant modulus from nonconstant modulus signal was obtained. In this paper, the adaptive equalization performance of proposed RMMA were evaluated comared to the present MMA. As a result of computer simulation, the convergence speed and residual quantity were improved in residual isi and MD. Especially the superiorities of robustness was confirm in SER performance compared to present MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.83-89
• /
• 2013

An adaptive blind equalization is a technique using to minimize the Inter-symbol Interference occurred on a communication channel in the transmission of the high speed digital data. In this paper, we propose a blind equalization more improving performance of the conventional MSAGF-MMA adaptive blind equalization algorithm by applying a multiple step size. This algorithm apply a LMS algorithm with a several step size according to each region divided by absolute values of decision-directed error to MSAGF-MMA. By computer simulation, it is confirmed that the proposed algorithm has a performance highly enhanced in terms of a convergence speed, a residual ISI and a residual error and an ensemble averaged MSE in a steady status compared with MMA and MSAGF-MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.55-61
• /
• 2013

This paper compare the performance of S-MMA(Sliced-MultiModulus Algorithm) adaptive equalization algorithm by effect of slice weighting value for the minimization of the distortion and noise in the communication channel.. In the traditional MMA algorithm, the output signal of equalizer and the dispersion constant of transmitting signal is used for calculating the equalizer coefficient, but in S-MMA, the output of equalizer and dispersion constant and the considering the output of decision device by the power of slice constant are used in order to simultaneously compensate the distortion of amplitude and phase distortion. It is confirmed by computer simulation that the slice weighting value affects the performance of adaptive equalization algorithm. The performance index includes the output signal constellation, the residual isi and maximum distortion and MSE that is for the convergence characteristics, the SER according to the signal and noise power ratio at the channel is used. As a result of simulation, the residual isi, maximum distortion and MSE performances are better in the small weighting values. But in SER performance is better in the large weighting values.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.91-97
• /
• 2016

This paper evaluates the equalization algorithm of FC-MMA (Fast Convergence-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of intersymbol interference which is due to the distortion of communication channel. In order to obtain the error signal for adaptive equalization, the FC-MMA use the modified dispersion constant considering the number of signal symbol, the RMMA separates the 4 region which every symbol points are located, then reduce the symbol point based on this region into constant modulus symbol point. By applying the different principle in order to get the error signal for the updating the tap coefficient of adaptive equalizer, it has the different equalization performance by these error signal. The computer simulation was performed in order to compare the different equalization performance in this paper. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion after in steady state and SER performance than FC-MMA, but not in convergence speed to reach the steady state.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.115-120
• /
• 2016

This paper deals with AM-SMMA (Adaptive Modulus-SMMA) adaptive equalization algorithm that is possible to improves the equalization performance using adaptive modulus which is propotional to the output signal power of equalizer in the current SMMA algorithm. The fixed statistic modulus of transmitted QAM signal is used in current SMMA algorithm in order to generate the error signal for updating the tap coefficient of equalizer. The adaptive modulus which is propotion to the equalizer output signal power is used in the proposed AM-SMMA. The computer simulation was performed in order to confirm the improved equalization performance of proposed algorithm. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, the residual isi, maximum distortion are better in the small weighting values. But in SER performance is better in the large weighting values.