• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.12-19
• /
• 1994

The crystallization behavior of the amorphous $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ alloy with isothermal annealing at $552^{\circ}C$ was studied by $M\"{o}ssbauer$ spectroscopy. The amorphous phase was revealed to coexist together with $Do_{3}-FeSi$ nanocrystalline and Cu-duster in annealed alloys by $M\"{o}ssbauer$ spectrum analysis. At the early stage of crystallization, Si content of FeSi is high due to the creation of Cu-cluster, and decreases with annealing until 60 minutes, which results in the increase in the mean hyperfine field of FeSi, and thereafter keeps constant. After 60 minutes, the decrease in the mean hyperfine field of the residual armrphous, in spite of a slight change in the volume fraction of the FeSi and the residual armrphous, is caused by the increase in the content of Nb and B in residual amorphous phase. Both directions of the hyperfine field, those of the FeSi and the residual amorphous, become randomly oriented in about 60 minutes. For FeSi and Cu-duster, the Avrami exponents are 0.51 and O.65, the activation energies are 2.35 eV and 2.44 eV, and the incubation times are 2.4 minutes and 0.8 minutes respectively. Earlier formation of Cu-duster than that of FeSi is coincidence with the fact that Cu atom promotes the nucleation of the FeSi.

• Culinary science and hospitality research
• /
• v.7 no.3
• /
• pp.179-191
• /
• 2001

The effects of whole wheat flour on the Rheological Properties of dough gassing power of yeast S.cerevisiae and breadmaking properties were studied. The blending ratios of whole wheat flour to bread making flour were 0, 25, 50, 75 and water absorption in the farinography increasedlinerly from 62.5%in 100% bread making flour and 77.5% in 100% whole wheat flour. The hardness and cohesiveness of dough prepared with optimum moisture content was constant regardless of the blending ratio of whole wheat flour. whole wheat flour had no effect on the total gas production or the internal gas content in the dough at a constant moisture level but had detrimental effect on the loaf volume. In a dough at the optimum moisture level, whole wheat flour increased the two former parameters sensory evaluation indicated that the replacement in the range of 25 to 50% with whole wheat flour at the optimum moisture level was acceptable

• The Bimonthly Magazine for Agrochemicals and Plant Protection
• /
• v.12 no.6 s.105
• /
• pp.31-39
• /
• 1991

소득의 증가로 생활수준이 향상됨에 따라 건강에 대한 소비자의 관심이 그 어느때 보다 고조되고 있다. 농산물(식품)중에 잔류하는 미량의 농약성분, 특히 발암위해성과 관련이 있는 농약성분의 잔류분에 대한 안전성 평가에 많은 관심이 모아지고 있는 것은 우리나라 뿐만 아니라 전세계적인 추세이다. 특히 미국에서는 관련법규(연방살충$\cdot$살균$\cdot$살서제법과 연방식품$\cdot$의약품$\cdot$화장품법)의 내용과 해석 차이로 US/EPA가 농약의 효율적인 관리를 위한 법률적용에 많은 어려움을 겪고 있으며, 현재도 관련법규나 제도를 계속 보완$\cdot$개정하려는 법안이 국회에 계류되어 심의중에 있다. 여기에 소개하는 내용은 US/EPA가 세계농약공업연맹(GIFAP)에 서신으로 보낸 ''델라네이 역설''(Delaney Paradox addressed by US EPA : GIFAP Bulletin Vol. 15(1). 1989)에 관한 것이다.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.372-378
• /
• 1996

고크롬주철에 있어서 기지 및 탄화물의 조직제어는 내마모성의 향상을 위해 필수적이다. 특히 기지조직내의 잔류오스테나이트함량은 최적 내마모성을 얻기위해 반드시 조절되어야 한다. 본 연구에서는 3% C-18%(or 25%)Cr-Mo-Ni-Mn 고크롬주철을 80$0^{\circ}C$, 90$0^{\circ}C$, 100$0^{\circ}C$ 및 110$0^{\circ}C$의 질소분위기 하에서 각각 20분 불안정화열처리를 행한 후 공냉시켰다. 잔류오스테나이트의 함량은 Xtjs 회절시험을 통해 측정하였으며 회절 peak는 $\alpha$200, $\alpha$220, ${\gamma}$220그리고 ${\gamma}$311을 이용하였다. 화학조성, 불안정화열처리의 온도 및 시간, 그리고 잔류오스테니이트함량강의 관계식을 도출하였다.

• The Korean Journal of Pesticide Science
• /
• v.17 no.2
• /
• pp.107-116
• /
• 2013

Polar pesticides like pymetrozine (log $P_{ow}$: -0.18) are known to be difficult to analyze. The analytical method of pymetrozine using hydromatrix included in the official method of KFDA was uncommon and provided ambiguous evidence to confirm both the identity and the quantity. Therefore, precise single residue analytical method was developed in representative crops for using liquid-liquid extraction (LLE). The pymetrozine residue was extracted with methanol from 11 representative crops which comprised apple, blueberry, broccoli, cabbage, cherry, crown daisy, hulled rice, Korean cabbage, potato, rice and watermelon. The extract was purified serially by liquid-liquid extraction (LLE) and silica solid phase extraction (SPE). For rice and hulled rice samples, n-hexane partition was additionally adopted to remove nonpolar interferences, mainly lipids. The residue levels were analyzed by HPLC with DAD, using $C_8$ column. LOQ (limit of quantitation) of pymetroizinie was 1 ng (S/N > 10) and MQL (method quantitation limit) was 0.01 mg/kg. Mean recoveries from 11 crop samples fortified at three levels (MQL, 10 ${\times}$ MQL and 50 ${\times}$ MQL) in triplicate were in the range of 83.1~98.5% with coefficients of variation (CV) of less than 10%, regardless of sample type, which satisfies the criteria of KFDA. The method established in this study could be applied to most of crops as an official and general method for analysis of pymetrozine residue.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.172-174
• /
• 2004

본 논문은 광산산성배수(AMD)에서 철 및 알루미늄 제거 효과가 입증되고 ARD(Acid Rock Drainage)에서의 비소제거 효과가 확인된 인회석을 침전제로 사용하여 철, 알루미늄 및 비소가 아닌 다른 중긍속의 제거효율을 알아보기 위해 도금폐수를 이용하여 실내실험을 실시하였다. 실험결과, 도금폐수의 수질분석결과에 의하면 '수질환경보존법 오염물질 배출허용기준' <가>지역 방출수 기준을 초과하는 것은 pH, Zn, Fe, Cu, Cr 및 P였다. 실험 결과 인회석 40번체 통과분-100번체 잔류분을 사용하는 것이 가장 적절할 것으로 생각되며 유속은 1kg의 인회석에 11의 도금폐수를 3시간 동안 반응시키면 경제적, 시간적 측면에서 가장 적절한 것으로 사료된다. 이 경우 pH는 1.98에서 5.30으로 증가하고 Cr, Fe, Cu 및 Zn은 각각 77.10%, 99.58%, 99.39% 및 40.77% 제거되는 것으로 나타났다. 용해율은 0.3619 g/min/kg으로 계산되었다. 그러나 3시간의 반응시간으로는 크롬 및 아연을 기준치 이하로 제거하지 못하므로 인회석 반응조를 다단계로 하는 실험을 수행해 그 결과를 평가해야 할 것이다.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.63-75
• /
• 2016

For safe water supply, residual chlorine has to be maintained in tap-water above a certain level from drinking water treatment plants to the final tap-water end-point. However, according to the current literature, approximately 30-60% of residual chlorine is being lost during the whole water supply pathways. The losses of residual chlorine may have been attributed to the current tendency for water supply managers to reduce chlorine dosage in drinking water treatment plants, aqueous phase decomposition of residual chlorine in supply pipes, accelerated chlorine decomposition at a high temperature during summer, leakage or losses of residual chlorine from old water supply pipes, and disappearances of residual chlorine in water storage tanks. Because of these, it is difficult to rule out the possibility that residual chlorine concentrations become lower than a regulatory level. In addition, it is concerned that the regulatory satisfaction of residual chlorine in water storage tanks can not always be guaranteed by using the current design method in which only storage capacity and/or hydraulic retention time are simply used as design factors, without considering other physico-chemical processes involved in chlorine disappearances in water storage tank. To circumvent the limitations of the current design method, mathematical models for aqueous chlorine decomposition, sorption of chlorine into wall surface, and mass-transfer into air-phase via evaporation were selected from literature, and residual chlorine reduction behavior in water storage tanks was numerically simulated. The model simulation revealed that the major factors influencing residual chlorine disappearances in water storage tanks are the water quality (organic pollutant concentration) of tap-water entering into a storage tank, the hydraulic dispersion developed by inflow of tap-water into a water storage tank, and sorption capacity onto the wall of a water storage tank. The findings from his work provide useful information in developing novel design and technology for minimizing residual chlorine disappearances in water storage tanks.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.290-297
• /
• 2014

BACKGROUND: The current study purposed to analyse the dissipation levels of a neonicotinoid insecticide and clothianidin in paddy and upland soils and clarify the effects of soil moisture on degradation and persistence of the insecticide. METHODS AND RESULTS: In order to achieve the research purposes, clothianidin 8% SG was applied to the paddy and upland fields at the rate of 0.024 kg a.i./10a, while the analytical standard was treated at 0.25 mg/kg soil under laboratory conditions. Based on the multiple first-order kinetics, total clothianidin in soils was dissipated with $DT_{50}$ of 6.7-16.1 and 6.9-8.2 days in the paddy and upland fields, respectively, whereas the figures under the laboratory condition became larger showing 56.3 and 19.6 days. CONCLUSION: As affected by soil moisture, some differences in degradative pathways were observed. Flooding of soil caused evidently demethylation and delayed cyclization of a major metabolite, thiazolylmethylguanidine (TMG) and methylaminoimidazole(MAI), compared to the aerobic upland condition. More than 80% and 50% of the parent compound was dissipated by the 24th day after the final application in both soils and, transformation products had constituted most of soil residues after that.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.105-115
• /
• 1982

Environmental samples contaminated with elemental sulfur(waters 22, sediments 20, crucian carps 19) collected from Soho Lake during the period of Sep. 1981 to Apr. 1982 were analyzed for polychlorinated biphenyls(PCBs) and organochlorine insecticides by GLC-ECD. Elemental sulfur was found to interfere in the residue analysis of environmental samples and the sulfur was eliminated, prior to analysis, with copper powder. PCBs residues in Soho lake were temporarily characterized as Aroclor 1254 and were analyzed at minimum detectable quantity of 0.04 ng by derivatizing PCBs to decachlorobiphenyl(DCB). PCBs were positively detected in all samples and its residue levels in waters, sediments, and crucian carps were $0.015{\sim}0.15$ ppb, $0.038{\sim}0.088$ ppm and 0.091 ppm, respectively. The residue levels of PCBs in all samples but sediments at central and outlet site of the lake were higher than those of total p,p'-DDT. The residue levels of PCBs in waters varied with inlets, i.e. those at right inlet site were three times of those at left inlet site. The main source of PCBs residues in the environmental samples of Soho Lake was not evident by present work.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.555-562
• /
• 2014

To perform performance-based seismic design of buildings, it is necessary clear goal for usage and stability after an earthquake. To clear this goal, it requires a review of the constituent material of the building and, in particular, a member used as an indicator of the residual strain is useful. There are more usage of prestressed concrete because of prestressing steel witch has characteristics of the origin-oriented. In this study, the goal is estimating of residual strain on the prestressed concrete beam member. The expression for angle of deformed prestressed concrete beam member was obtained from using of curvature on the critical section and the equivalent plastic hinge length based on 'equivalent plastic hinge length method'. Considering the balance of strength and deformation conditions, suitable analysis values were derived from 'split Element Method'. Through various parametric studies, various factors affecting the residual strain were decided. Based on the results of this study, it is expected many researches will be proceed in the future.