• Korean Journal of Environmental Agriculture
• /
• v.19 no.2
• /
• pp.116-121
• /
• 2000

Photosensitizing activities of some selected photosensitizers (PS) on the artificial diminution of pesticide residues on red pepper were investigated. Red peppers were sprayed 4 times with the three fungicides, dithianon, triflumizole, and triforine, according to the conventional method, followed by the application of photosensitizers once. Recoveries for the analyses of the pesticide residues were high $(90.7{\sim}98.5%)$ except for dithianon $(76.6{\sim}78.3%)$. In case of dithianon, after 1 day of the application of PS-1 (10 ppm), the residual amount was 76% of that of the control. For triflumizole, the residual amount after 3 days of the application of PS-4 (50 ppm) accounted for 48% of that of the control. In case of triforine, the residual amount after 1 day of the application of PS-3 (100 ppm) was 55% of that of the control. The results indicated that the photosensitizing activities of photosensitizers varied with chemicals and the matrices where pesticide residues are remaining.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2015

This paper presents finite element (FE) analyses to clarify the effects of external pressure on the residual stresses in a girth-welded steel pipe. At first, FE simulation of the girth welding process is carried out to obtain the weld-induced residual stresses employing sequentially coupled three-dimensional (3-D) thermo-mechanical FE formulation. Then, 3-D elastic-plastic FE analyses incorporating the residual stresses and plastic strains obtained from the preceding FE simulation are performed to investigate the residual stress behavior in the girth-welded pipe under external pressure. The FE analysis results show that the hoop compressive stresses induced by the external pressure significantly alter the hoop residual stresses in the course of the mechanical loading.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.192-192
• /
• 2011

Mo 박막은 열적 안전성과 전기 전도성이 우수한 소재로 CIGS 태양전지의 배면전극으로 사용되고 있다. 스퍼터링법에 의한 Mo 박막의 전도성은 공정압력에 민감하여 높은 압력과 낮은 압력에서 이중박막으로 제조되고 있다. 연구에서는 압력에 크게 영향을 받지 않으면서 전도성이 $10{\mu}{\Omega}-cm$ 이하로 우수한 Mo 박막을 얻을 수 있는 아크 이온플레이팅법으로 Mo 박막을 제조하였다. 그러나 Mo 박막 증착시에 나타나는 높은 압축응력은 기재(Soda lime Glass; SLG)와의 밀착성을 떨어뜨렸다. 기재(SLG)와의 밀착성을 확보하기 위해 Ti 중간층($0.3{\mu}m$, $0.9{\mu}m$)을 증착하고 그 위에 Mo 박막을 증착하여 전도성이 우수한 박막을 제조하였으나 여전히 압축잔류응력의 문제점을 보였다. 압축응력의 완화를 위해 CIGS 박막이 제조되는 $550^{\circ}C$의 온도에서 열처리를 1시간 수행하였다. 열처리를 통해 열처리 전과 후에 나타나는 전도성과 잔류응력의 변화를 공정압력(5 mTorr~30 mTorr)별로 알아보았다. 사용된 시험편은 Si wafer, SLG, SUS계 소재를 이용하였으며 공정압력별로 아크 타겟에 인가되는 전류는 100 A로 고정하였고, 바이어스 전압은 0V, -50V를 인가하였다. 열처리 전과 후에 전도성은 크게 변화가 관찰되지 않았으나 잔류응력에는 많은 변화가 관찰 되었다. 잔류응력은 공정압력(5mTorr~30mTorr)별로 응력 완화가 일어났으며, 바이어스 전압이 0V에서 공정압력이 5 mTorr일 때 열처리 전에 측정된 1346 MPa 압축응력이 열처리 후에는 188 MPa의 인장응력을 나타내었다. 이러한 응력 변화에 대해 XRD와 SEM으로 구조분석을 통해 Mo 박막의 결정성과 전도성 및 잔류응력의 상관관계에 대해 알아보았다.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.18-25
• /
• 1979

In order to investigate the effect of polishing washing and cooking processes on the residue level of BHC in rice grain, brown rice samples having a 0.3 ppm total BHC content were subjected to various treatments and residue analysis. The results are summarized as follows: 1) The conventional polishing process of brown rice decreased the residue level down to 8 and 20% for 100 and 70% polished rice, respectively. 2) The washing procedure decreased the level to 34 and 31% for 100 and 70% polished rice, respectively. 3) The cooking processes with a conventional kettle and an automatic electric cooker decreased the residue level to 86 and 77% in 100% polished rice, and 69 and 41% in 70% polished rice, respectively. 4) By summation of the above results in sequence. it was concluded that the residue levels of BHC in cooked rice were 2.3 and 4.3% of original residue in the brown rice for 100 and 70% polished rice, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2008

To identify the reclamation history formed by top dredged soil reclamation layer over the original ground, various field tests and laboratory tests were conducted. Especially when the original ground was not completely consolidated, CPTu test was carried out to calculate rational settlement due to the banking load. CPTu test results showed that the degree of consolidation of weak clay ground by dredged reclamation was on average 80%. As the research area was not completely consolidated by dredged reclamation in the past, the consolidation settlement should account for the residual settlement (20%) in the case of additional banking load. When the degree of consolidation of the original ground was not taken into account, the residual consolidation was expected in excessive settlement (up to 20%) and in such case PBD (Plastic Board Drain) was not effective in obtaining desired degree of consolidation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.59-59
• /
• 2003

경사기능 재료는 위치에 따른 특성 변화를 갖고 있어 변화하는 주변 환경에서 사용되는 재료의 응용성을 높일 수 있는 장점이 있다. 적합한 경사기능 재료의 제조를 위해서는 탄성률, 강도, 인성 등의 위치에 따른 변화를 예측하는 것이 필요하다. 그러나 재료 내에서의 탄성률 변화 등으로 인해 경사기능 재료에서 인성을 정량적으로 표현하는데는 어려움이 있으므로 이를 정량적으로 측정하고, R-curve를 결정하는 것은 재료의 응용성에 중요한 인자가 된다. 본 연구에서는 폴리우레탄 스폰지를 이용하여 밀도의 분포가 연속적으로 다른 폴리 우레탄 스폰지를 제조하고 이에 알루미나 분말 슬러리를 이용하여 slip casting을 행하였다. 그 후 폴리 우레탄 스폰지를 탈지한 후 알루미나 성형체를 소결하여 연속적인 기공률 분포가 다른 다공성 알루미나를 제조하였으며, 이에 Al을 용침하여 $Al_2O_3-Al$ 경사기능 재료를 제조하였다. 이러한 $Al_2O_3-Al$ 경사기능 재료에 대해 파괴인성 및 R-curve 특성을 CT(conpact tension)시편으로 측정하였으며, 이를 균일한 복합체의 파괴인성과 비교하였다. 또한 잔류 응력 특성을 파악하기 위해 실험적이 응력 데이터를 Moire interferometry를 이용하여 결정하였다. 또한 이를 유한요서 해석법(FEM)에 의한 계산치와 비교하였다. 서로 다른 조성 분포를 갖는 $Al_2O_3-Al$ 경사기능 재료와 균일한 복합체의 파괴인성을 비교한 결과 동일한 Al조성에서도 서로 다른 파괴 인성치가 나타났다. $Al_2O_3-Al$ 경사기능 재료에서 파괴인성에 영향을 줄 수 있는 인자로는 술수한 $Al_2O_3$의 파괴인성에 Al금속의 소성변형에 의한 인성증진 효과, 그리고 경사기능 재료에서 상호 조성차이에 따른 잔류응력을 고려할 수 있을 것이다. 이중 $Al_2O_3-Al$ 경사기능 재료의 파괴인성에 미치는 잔류응력의 영향을 고려하기 위해 이의 잔류응력에 대해 실험에 의한 유추된 잔류응력과 FEM계산에 의해 유추된 잔류 응력을 비교, 분석하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.4
• /
• pp.39-45
• /
• 2010

Thick-walled cylinders, such as a cannon or nuclear reactor, are autofrettaged to induce advantageous residual stresses into pressure vessels and to increase operating pressure and the fatigue lifetimes. As the autofrettage level increases, the magnitude of compressive residual stress at the bore also increases. The purpose of the present paper is to predict the accurate residual stress of SCM440 high strength steel using the Kendall model which was adopted by ASME Code. Hydraulic pressure process was applied in the inner part and thick-walled cylinders were autofrettaged up to 30% overstrain levels. Electro polishing on the surface of autofrettage specimen was performed to get more accurate residual stress. Residual stresses were measured by X-ray diffraction method. The autofrettage surface which was plastically deformed analyzed using a scanning electron microscope(SEM). Although there were some differences in measured residual stress and numerical results, it has a tendency to agree comparatively with each other.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1197-1210
• /
• 2022

Recently, users' complaints on drinking water quality are increasing according to emerging interest in the drinking water service issues such as pipe aging and various water quality accidents. In the case of drinking water quality complaints, not only the water pollution but also the inconvenience on the chlorine residual for disinfection are included, thus various efforts, such as rechlorination treatment, are being attempted in order to keep the chlorine concentration supplied evenly. In this research, for a more accurate water quality simulation of water distribution network, the water quality reaction coefficients were estimated, and an optimization method of chlorination/ rechlorination scheduling was proposed consideirng satisfaction of water quality standards and chlorine residual equalization. The proposed method was applied to a large-scale real water network, and various chlorination schemes were comparatively analyzed through the grid search algorithm and optimized based on the suitability and uniformity of supplied chlorine residual concentration.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.227-234
• /
• 2019

An analytical method was developed for the determination of oxytetracycline in agricultural products using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method by liquid chromatography-tandem mass spectrometry (LC-MS/MS). After the samples were extracted with methanol, the extracts were adjusted to pH 4 by formic acid and sodium chloride was added to remove water. Dispersive solid phase extraction (d-SPE) cleanup was carried out using $MgSO_4$ (anhydrous magnesium sulfate), PSA (primary secondary amine), $C_{18}$ (octadecyl) and GCB (graphitized carbon black). The analytes were quantified and confirmed with LC-MS/MS using ESI (electrospray ionization) in positive ion MRM (multiple reaction monitoring) mode. The matrix-matched calibration curves were constructed using six levels ($0.001{\sim}0.25{\mu}g/mL$) and coefficient of determination ($r^2$) was above 0.99. Recovery results at three concentrations (LOQ, $10{\times}LOQ$, and $50{\times}LOQ$, n=5) were from 80.0 to 108.2% with relative standard deviations (RSDs) less than of 11.4%. For inter-laboratory validation, the average recovery was in the range of 83.5~103.2% and the coefficient of variation (CV) was below 14.1%. All results satisfied the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for oxytetracycline determination in agricultural commodities. This study could be useful for safety management of oxytetracycline residues in agricultural products.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.82-88
• /
• 2011

BACKGROUND: Tetracyclines (TCs) are mainly regulated as parent compounds by bioactivity-based screening methods in food. Especially with respect to antimicrobial residues, their metabolites/epimers are also highly concerning chemicals and traditionally applied microbial detection methods are needed to improve with validation for regulatory control. METHODS AND RESULTS: Detection capability and biological activity of tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC) and their epimers; anhydrotetracycline (ATC), epianhydrotetracycline (EATC), epitetracycline (ETC), 4-epi-chlortetracycline (ECTC), 4-epianydrochlotetra-cycline (EACTC), 4-epioxychlortetracycline (EOTC), were measured by microbial growth inhibition screening method of Korea Food Code. CONCLUSION(S): Limited detection capabilities were found, B. megarerium and B. subtilis showed for TC and CTC, and B. subtilis for OTC. Biological potency of each epimer was also presented against various microorganisms, at the level from 50% to 96%, comparing with parent TCs. It is recommended that more advanced microbial screening methods with validation are needed, and biologically active epimers are to be considered as marker residues for MRL setting of regulatory control purpose.