• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.601-610
• /
• 1997

Background : Monocytes/macrophages play a central role in determining the host response during Gram-negative infection through secretion of a variety of mediators after stimulation of LPS. Even though cytokine production has been shown to play an important role in host defense during sepsis, cytokine release may also lead to tissue injury. Thus, regulation of macrophage response to LPS is critical for host survival during Gram-negative sepsis. In animals exposed to nonlethal doses of endotoxin, a characteristic hyporesponsiveness to subsequent administration of endotoxin has been observed. This phenomenon was known as 'LPS tolerance'. However, little information is available regarding the underlying mechanism of LPS tolerance. Method : Peripheral blood monocyte(PBMC) was isolated from peripheral blood of normal volunteers by adhesion purification method. To evaluate the conditions to obtain LPS tolerance, preculture was carried out with LPS at 10ng/ml for 24 hours. For stimulation, culture plates were washed two times and were stimulated with LPS at $1{\mu}g/ml$ for 4, 6 and 26 hours. To assess the underlying mechanisms of LPS tolerance, autologous serum, PMA, anti-CD14 Ab, Indomethacin or $PGF_2$ were added to preculture solution respectively. Cytokine concentrations in culture supernatants were measured using ELISA for TNF-$\alpha$ and IL-8 and mRNA of TNF-$\alpha$ and IL-8 were determined by Northern blot analysis. Results : The exposure of PBMC to low dose of LPS suppressed the cytokine production and mRNA expression of TNF-$\alpha$, but not IL-8. Anti-CD14 Ab partially recovered production of TNF-$\alpha$ which was suppressed by preculture with low dose LPS. The preculture with PMA induces LPS tolerance, as preculture with low dose LPS. Conclusion : LPS tolerance to TNF-$\alpha$ is regulated pretranslationally and is influenced by protein kinase C pathway and CD14.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1134-1142
• /
• 2010

This study was carried out to investigate the effects of powders of autoclaved soy flour and doenjang fermented using Bacillus subtilis DJI on lipid profiles and antioxidative activities of rats fed a high cholesterol diet. Sprague-Dawley male rats weighing 200~210 g were divided into four groups: normal diet group (N), high cholesterol diet group (HC), autoclaved soy flour and high cholesterol diet group (SHC), and doenjang and high cholesterol diet group (DHC). The serum ALT, AST and ALP activities of the SHC and DHC groups were lower than those of the HC group, but exerted no significant change on serum LDH activity. Serum triglyceride, total cholesterol and LDL-cholesterol levels were markedly decreased by autoclaved soy flour and doenjang administration, while the serum HDL-cholesterol level was higher in groups given autoclaved soy flour and doenjang administration. The GSH-Px and catalase activities in liver elevated by a high cholesterol diet were significantly decreased by autoclaved soy flour and doenjang administration (p<0.05). Liver GSH levels of the SHC and DHC groups were significantly decreased compared to the HC group (p<0.05). Liver TBARS level was significantly decreased in the DHC group fed with doenjang powder compared with those of the HC group (p<0.05). These results suggest that soy flour and doenjang may reduce levels of serum cholesterol and prevent oxidative stress by stimulating antioxidative systems in rats fed a high cholesterol diet.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2013

In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.5 no.1
• /
• pp.26-32
• /
• 2002

Purpose: Constipation in childhood is a significant problem, however, understanding of its epidemiology has been limited in Korea. The aim of this study was to investigate the prevalence and risk factors of constipation in school-aged children, helping to manage and prevent it. Methods: This cross-sectional, descripsive observational prevalence study included children (2grade, 1st and 6th grade) who were attending two elementary schools in Gwangju. The prevalence of constipation, associated symptoms, and risk factors were evaluated by questionnaire. A child was considered to be constipated when he or she defecated two or less times per week. Results: The prevalence of constipation was 15.4%. There is no significant difference between both sexes and grades. Of the causes of constipation, there was statistically significant difference in exercise deficiency, frequent intake of convenience food, long-time watching TV, unbalanced diet and enuresis history between constipation and normal group. Especially, long-time watching TV, exercise deficiency, and enuresis history were risk factors for development of constipation. Only 27.1% of children with constipation were treated by laxative and enema. Conclusion: Even though the prevalence of constipation was high, more than half of them was not treated at all. We should endeavor to educate the children and their parents to prevent constipation by evaluating the feeding and behavioral habit completely, and treating them properly.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.634-640
• /
• 2007

Our previous study suggested that n-3 fatty acid deficiency was associated with significantly reduced spatial learning as assessed by Morris water maze test. Here we investigated an effect of n-3 fatty acid deficiency on rat brain, retina and serum fatty acyl compositions at 15 wks age using a first generational artificial rearing technique. Newborn Rat pups were separated on day 2 and assigned to two artificial rearing groups or a dam-reared control group. Pups were hand fed artificial milk via custom-designed nursing bottles containing either 0.02%(n-3 Deficient) or 3.1% (n-3 Adequate) of total fatty acids as a-linolenic acid(LNA). At day 21, rats were weaned to either n-3 deficient or n-3 adequate pelleted diets and fatty acid compositions of brain, retina and liver were analyzed at 15 wks age. Brain docosahexaenoic acid(DHA) was lower(58% and 61%, P<0.05) in n-3 deficient in comparison to n-3 adequate and dam-reared groups, receptively, while brain docosapentaenoic acid(DPAn-6) was increased in the n-3 deficient group. In retina and serum fatty acid compositions, the decreased precentage of DHA and increased precentage of DPAn-6 were observed. These results suggested that artificial rearing method can be used to produce n-3 fatty acid deficiency in the first generation and that adequate brain DHA levels are required for optimal brain function.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.383-389
• /
• 2017

This study aimed to select a yeast strain for optimizing the quality of distilled spirits. The brewing and distilling properties of 4 KFRI (Korea Food Research Institute) yeasts (Y88-4, Y98-4, Y172-6, Y192-4) and 2 industry yeasts (C1, C2) were compared. For investigating the possibility of using these strains on an industrial scale, diverse analytical methods were applied to assess parameters associated with distilled spirit quality such as alcohol content, pH, total acidity, and soluble solid content. After 11 days of fermentation, the alcohol strength obtained using six yeast strains reached 13.9-16.4% (v/v), while pH was 3.9-4.0, and total acid was 0.40-0.52%. To compare GC-MSD Volatile flavor components, all the distilled spirit samples were diluted to 20% (v/v) alcohol strength. Seven fusel alcohols, 26 esters, 2 acids, and 3 miscellaneous compounds were detected in the distilled spirits. Y88-4 had the most abundant volatile flavor component and scored the highest overall preference in sensory evaluation. After analyzing the various properties of yeasts, strain Y88-4 was finally selected as the best strain for producing distilled spirits.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1125-1146
• /
• 2018

Segment lining applied to the TBM tunnel is mainly made of concrete, and it requires sufficient structural capacity to resist loads received during the construction and also after the completion. When segment lining is design to the Limit State Design, both Ultimate Limit State (ULS) and Service Limit State (SLS) should be met for the possible load cases that covers both permanent and temporary load cases - such as load applied by TBM. When design segment lining, it is important to check structural capacity at the joints as both temporary and permanent loads are always transferred through the segment joints, and sometimes the load applied to the joint is high enough to damage the segment - so called bursting failure. According to the various design guides from UK (PAS 8810, 2016), compression stress at the joint surface can generate bursting failure of the segment. This is normally from the TBM's jacking force applied at the circumferential joint, and the lining's hoop thrust generated from the permanent loads applied at the radial joint. Therefore, precast concrete segment lining's joints shall be designed to have sufficient structural capacity to resist bursting stresses generated by the TBM's jacking force and by the hoop thrust. In this study, bursting stress at the segment joints are calculated, and the joint's structural capacity was assessed using Leonhardt (1964) and FEM analysis for three different design cases. For those three analysis cases, hoop thrust at the radial joint was calculated with the application of the most widely used limit state design codes Eurocode and AASHTO LRFD (2017). For the circumferential joints bursting design, an assumed TBM jack force was used with considering of the construction tolerance of the segments and the eccentricity of the jack's position. The analysis results show reinforcement is needed as joint bursting stresses exceeds the allowable tensile strength of concrete. This highlights that joint bursting check shall be considered as a mandatory design item in the limit state design of the segment lining.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1293-1301
• /
• 2018

The basic magnetic properties of commercially available High-$T_c$ Superconductor (HTS) GdBCO-coated conductor (GdBCO-CCs) were investigated by using physical property measurement system-vibrating sample magnetometer (PPMS-VSM). From the zero-field-cooled (ZFC) m(T) curve, the $T_c$ was found to be ~93 K. After removing the background m(H) data, we obtained both the net m(H) data and the ${\Delta}m_{irr}$. The $H_{irr}(T)$ coincided very well with the power-law relation $H_{irr}=H_{irr}(0)(1-T/T_c)^n$ with $$n{\sim_=}1.19$$. The magnetic flux behavior was investigated by using the ${\delta}$ values in the relationship $J_c{\propto}{\Delta}m_{irr}{\propto}H^{-{\delta}}$. A ${\delta}{\approx}0$ region denoting an independent magnetic flux pinning effect, a ${\delta}{\approx}0.6{\sim}1.2$ region representing a collective flux pinning effect due to the interaction, and a ${\delta}{\gg}2$ region representing freely moving magnetic fluxes caused by the Lorentz force were observed. The boundary line between ${\delta}{\approx}0$ and ${\delta}{\approx}0.6{\sim}1.2$ is denoted by a $H_1$, and the one between ${\delta}{\approx}0.6{\sim}1.2$ and ${\delta}{\gg}2$ is denoted by a $H_2$. The ${\delta}(T)$ was obtained in the region of $H_1$ < H < $H_2$. As the temperature was decreased, the ${\delta}$ value gradually decreased.

• Journal of the Korean Society for information Management
• /
• v.39 no.2
• /
• pp.111-129
• /
• 2022

Insomnia is a chronic disease in modern society, with the number of new patients increasing by more than 20% in the last 5 years. Insomnia is a serious disease that requires diagnosis and treatment because the individual and social problems that occur when there is a lack of sleep are serious and the triggers of insomnia are complex. This study collected 5,699 data from 'insomnia', a community on 'Reddit', a social media that freely expresses opinions. Based on the International Classification of Sleep Disorders ICSD-3 standard and the guidelines with the help of experts, the insomnia corpus was constructed by tagging them as insomnia tendency documents and non-insomnia tendency documents. Five deep learning language models (BERT, RoBERTa, ALBERT, ELECTRA, XLNet) were trained using the constructed insomnia corpus as training data. As a result of performance evaluation, RoBERTa showed the highest performance with an accuracy of 81.33%. In order to in-depth analysis of insomnia social data, topic modeling was performed using the newly emerged BERTopic method by supplementing the weaknesses of LDA, which is widely used in the past. As a result of the analysis, 8 subject groups ('Negative emotions', 'Advice and help and gratitude', 'Insomnia-related diseases', 'Sleeping pills', 'Exercise and eating habits', 'Physical characteristics', 'Activity characteristics', 'Environmental characteristics') could be confirmed. Users expressed negative emotions and sought help and advice from the Reddit insomnia community. In addition, they mentioned diseases related to insomnia, shared discourse on the use of sleeping pills, and expressed interest in exercise and eating habits. As insomnia-related characteristics, we found physical characteristics such as breathing, pregnancy, and heart, active characteristics such as zombies, hypnic jerk, and groggy, and environmental characteristics such as sunlight, blankets, temperature, and naps.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.101-114
• /
• 2008

Pressurized grouting is a common technique in geotechnical engineering applications to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressurized grouting has been applied to a soil-nailing system which is widely used to improve slope stability. Because interaction between pressurized grouting paste and adjacent ground mass is complicated and difficult to analyze, the soil-nailing design has been empirically performed in most geotechnical applications. The purpose of this study is to analyze the ground behavior induced by pressurized grouting paste with the aid of laboratory model tests. The laboratory tests are carried out for four kinds of granitic residual soils. When injecting pressure is applied to grout, the pressure measured in the adjacent ground initially increases for a while, which behaves in the way of the membrane model. With the lapse of time, the pressure in the adjacent ground decreases down to a value of residual stress because a portion of water in the grouting paste seeps into the adjacent ground. The seepage can be indicated by the fact that the ratio of water/cement in the grouting paste has decreased from a initial value of 50% to around 30% during the test. The reduction of the W/C ratio should cause to harden the grouting paste and increase the stiffness of it, which restricts the rebound of out-moved ground into the original position, and thus increase the in-situ stress by approximately 20% of the injecting pressures. The measured radial deformation of the ground under pressure is in good agreement with the expansion of a cylindrical cavity estimated by the cavity expansion theory. In-situ test revealed that the pullout resistance of a soil nailing with pressurized grouting is about 36% larger than that with regular grouting, caused by grout radius increase, residual stress effect, and/or roughness increase.