• Journal of Korean Library and Information Science Society
• /
• v.29
• /
• pp.443-464
• /
• 1998

21세기를 맞이하여 대학도서관은 정보기술의 도입, 업무내용의 변화, 이용자의 요구변화등 급격하게 변화하는 새로운 환경에 직면해 있다. 본 연구는 한국의 대학도서관 조직구조의 현황에 대한 분석과 함께 다양한 조직이론들과 정보환경의 변화에 기초해서 도서관조직을 활성화시키기위한 개념적인 조직모델을 제시하고자 한다. 한국의 대학도서관은 거의 10년동안 법적인 제약과 조직내외의 환경적인 한계 등으로 인해 전산화시스템의 도입, 도서관부관장의 임명, 그리고 도서관과 컴퓨터 센터와의 통합시도와 같은 약간의 변화외에는 거의 변화가 없었다. 전형적인 한국의 대학도서관은 수서, 기술서비스, 열람과 참고봉사 부문으로 조직되었다. 여기서 수서 기능을 기술서비스의 부문으로 간주한다면, 본 연구의 대상인 대학도서관 114개관 중 95개관(82.5%)이 전통적인 도서관조직의 형태인 기술서비스와 공공서비스 부문으로 조직된 것으로 나타났다. 본 연구에서는 전통적인 도서관조직의 문제점들을 급복할 수 있는 21세기의 개념적인 대학도서관 조직모델로서, 네가지 부문 - 서비스 부문, 서비스지원 부문, 기술지원 부문, 그리고 통합·조정부문-을 대학도서관의 개념적인 기본 구성요소로써 제안하였다. 그러나 모든 도서관의 서비스나 업무과정에 대해 적합한 잉상적인 조직구조는 없으며, 조직의 재조직과정은 도서관의 형태와 목적, 업무과정에 따라 매우 다양하다. 따라서 도서관의 재조직화는 환경의 변화에 따라 끊임없는 과정이 될 것이며, 도서관조직의 성공은 이러한 변화에 적응할 수 있는 개인과 조직의 역량에 달려있다고 하겠다.대한 순서에 있어서 차이가 있다. 4) 도서관에 대한 태도에 있어서 두 집단은 상이한 입장을 보이고 있다. 학자들의 과반수는 중요 정보원으로서 자신의 개인장서를 활용하며, 도서관의 장서 및 그 조직방법에 대해서도 별로 만족하지를 못하고 있다. 반면에, 실무가들은 도서관에 대하여 비교적 만족하며 따라서 도서관에 대한 이용도도 높다. 5) 두 집단 모두 보조인을 적극적으로 활용하지 않으며 사서의 도움을 받는 경우도 극소수에 불과하다. 이러한 조사결과를 기초로 하여 볼 때 법률전문직을 둘러싼 정보환경을 개선하기 위하여는, 인쇄된 일차적 정보자료의 검색방법등을 개선하고, 나아가서는 법령과 판례정보를 위한 효율적인 시스템을 구축하며, 뿐만 아니라 이용자의 요구에 충분히 대처할 수 잇는 도서관으로 변화되는 것이다. 이와 함께 가장 중요한 것은 법과대학과 사법연수원에서 법학 연구방법에 관한 강좌를 개설하여 각종 법률정보원의 활용 내지 도서관 이용방법에 관하여 교육하는 것이다.글을 연구하고, 그 결과에 의존하여서 우리의 실제의 생활에 사용하는 $\boxDr$한국어사전$\boxUl$등을 만드는 과정에서, 어떤 의미에서 실험되었다고 말할 수가 있는 언어과학의 연구의 결과에 의존하여서 수행되는 철학적인 작업이다. 여기에서는 하나의 철학적인 연구의 시작으로 받아들여지는 이 의미분석의 문제를 반성하여 본다. 것이 필요하다고 사료된다.크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.687-698
• /
• 2012

This study was conducted to monitor and prevent outbreak of insect pestsin dredged soil dumping area after completion of dredging construction in Masan City. Monitoring was carried out using tent trap, colored sticky trap, and CDC light trap. A total of 217,073 individuals belonging to 23 species from 10 families in 3 orders were collected. In overwintering survey using tent trap, 3 species were collected. 2 species (Leptocera fuscipennis (Haliday) and Ephydra japonica Miyagi) of them were outbreak species. In color sticky trap, more than 96% of total individuals were comprised of five species: Urolepis maritima Walker (43%), E. japonica (19%), Fucellia sp. 1 (13%), Philotelma sp. 1 (10%), and Homalometopus sp. 1 (9%). In CDC light trap, three dominant species were Homalometopus sp. 1 (91%), Glyptotendipes tokunagai Sasa (6%), and L. fuscipennis (1%), representing about 98% of the total. To prevent damage caused by outbreak of insect pests, we carried out ecological control methods such as covering the fresh soil in outbreak area, using light trap, pumping up water and so on, minimizing use of thermal fogging and insect growth regulatorwhen the insect pest population was rapidly increasing.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.68-77
• /
• 2015

One of recent concerns for super-tall buildings is how to manage hoisting plans and equipment efficiently. Disasters are frequently occurred in relation to electromotive hoists and cranes which are commonly used in construction sites. For construction lifts, particularly, it is highly important to conduct regular inspections or prepare against breakdown in terms of safety. However, unfortunately the reality is that regular inspections are only flatly conducted according to operating hours only. A lift, whose life span is subject to the complicated considerations such as operating hours, loading condition, and the like of each component, is far too invalid as a means of maintenance. As a way to resolve this problem and improve its convenience and safety for users, this study intends to calculate individual inspection interval for the main components of lifts by measuring their actual operating hours with sensing technology and analyzing their historical data. The findings of study include calculation of inspection intervals for the main components of lifts and classification of components to check by the actual operating hours of lift (40, 90, 130, 400 hours), which are drawn up into tables. This will make an opportunity to suggest efficient maintenance measures by enabling prevention of safety accidents and enhancement of safety for workers. Also, it will lead to increasing productivity of works by eliminating sources of delaying the term due to the breakdown of lifts.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.47-55
• /
• 2011

The optimum mold design and the optimum process condition were constructed upon executing process simulation of rubber injection molding with the commercial CAE program of MOLDFLOW (Ver. 5.2) in order to solve the process-problems of K company relating to cracks, which occurs at the inner cavity wall of C. V. joint boots. As a result it was confirmed that the real cracks occurs at the exactly same position of the cavity as exhibits the defects of weld and meld line and unsatisfactory curing according to the result of simulation. In order to prevent the occurrence of weld and meld line at the defect-position, the location of gate was altered to the optimum position of the cavity. Consequently the filling pattern was established to minimize the degree of the melt-fronts confronting or the melt-flows melding to prevent the occurrence of weld and meld line at the defect-position. It was observed that both gate-positions to maximize the degree of the formation of weld and meld line and air traps are located, respectively, in opposite direction each other with reference to the optimum gate position. In addition, the temperature of mold was raised by $10^{\circ}C$ and maintained at $170^{\circ}C$ for satisfactory curing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.2
• /
• pp.1-7
• /
• 1988

Predicting treeform should be very important, eventhough it is difficult, step for landscape designers. This study was carried out to develop a method to classify the treeforms of landscape plants by numerical data. Twenty five treeforms are selected to be compared with 41 Zelkova serrata MAKINO, 26 Pinus strobus L., and 44 Magnolia denudata DESROUX. Statistical judgement was made by using X$^2$-Test. The results are summerized as follows. 1. Zelkova serrata was classified as B3 or C3. This species showed a tendency of changing from A type to B or C type, and the CL/CH ratio(canopy length/canopy height) is thought to be increased as aged. 2. pinus strobus was classified as D4-D5 and the CL/CH ratio tends to be increased as aged. 3. Magnolia denudata was classified as D4 and the change by aging was not observed clearly.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.363-368
• /
• 2008

Mobile devices become more complex and harder to manage due to the advance of technologies. In this paper, we designed and implemented the DM Agent based on OMA(Open Mobile Alliance) DM(Device Management) which is a standard for mobile device management. The proposed DM Agent basically can manage parameter configuration through the commands ADD, DELETE, REPLACE and GET currently. Each module of the agent was designed and implemented separately for additional functions such as error reporting and software management. So the additional functions can be added by modifying Adaptor part which processes the management commands instead of modifying other modules which analyze or generate management commands. The DM Agent proposed in this paper is implemented based on WIPI(Wireless Internet Platform for Interoperability), therefore portability of the agent can be improved. In addition, this research can give a development example for dissenminating OMA DM as well as verify functional compatibility of WIPI platform. SK WIPI SDK and a Funambol DM test server are used to test operations of the implemented DM Agent.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.775-788
• /
• 2006

Many disaster monitoring systems are constantly studied to prevent disasters such as environmental pollution, the breaking of a tunnel and a building, flooding, storm earthquake according to the progress of wireless telecommunication, the miniaturization of terminal devices, and the spread of sensor network. A disaster monitoring system can extract information of a remote place, process sensor data with rules to recognize disaster situation, and provide work for preventing disaster. However existing monitoring systems are not enough to predict and prevent disaster, because they can only process current sensor data through utilizing simple aggregation function and operators. In this paper, we design and implement a disaster prevention system to predict near future dangerous area through using outside sensor network and spatial Information. The provided prediction technique considers the change of spatial information over time with current sensor data, and indicates the place that could be dangerous in near future. The system can recognize which place would be dangerous and prepare the disaster prevention. Therefore, damage of disaster and cost of recovery would be reduced. The provided disaster prevention system and prediction technique could be applied to various disaster prevention systems and be utilized for preventing disaster and reducing damages.

• Journal of KIISE:Databases
• /
• v.41 no.4
• /
• pp.226-241
• /
• 2014

LOD(Linked Open Data) is composed of RDF triples which are based on ontologies. They are identified, linked, and accessed under the principles of linked data. Publications of LOD data sets lead to the extension of LOD cloud and ultimately progress to the web of data. However, if ontologically the same things in different LOD data sets are identified by different URIs, it is difficult to figure out their sameness and to provide trustworthy links among them. To solve this problem, we suggest a Trustworthiness Improving Link Evaluation, TILE for short, technique. TILE evaluates links in 4 steps. Step 1 is to consider the inference property of syntactic elements in LOD data set and then generate RDF triples which have existed implicitly. In Step 2, TILE appoints predicates, compares their objects in triples, and then evaluates links between the subjects in the triples. In Step 3, TILE evaluates the predicates' syntactic property at the standpoints of subject description and vocabulary definition and compensates the evaluation results of Step 2. The syntactic elements considered by TILE contain RDFS, OWL, OWL2 which are recommended by W3C. Finally, TILE makes the publisher of LOD data set review the evaluation results and then decide whether to re-evaluate or finalize the links. This leads the publishers' responsibility to be reflected in the trustworthiness of links among the data published.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.559-568
• /
• 2020

Epidermal growth factor (EGF) is a hormone protein that affects cell growth and proliferation, and has various medical applications. In the present study, the gene of human EGF was codon-optimized with E. coli and the expression vector was constructed by cloning into pRSET. In order to obtain the recombinant human EGF in an active form rather than an inclusion body, chaperone co-expression was attempted along with codon optimization, for the first time. The expressed human EGF was isolated in the pure form by performing Ion Exchange Chromatography in two consecutive runs. ELISA analysis showed that the activity of purified EGF was greater than 99%, which is similar to commercially available EGF. Cell proliferation test confirmed that the recombinant human EGF has the ability to promote cell proliferation of human skin fibroblasts. The human EGF expression system of this study gives a significant amount of protein, and does not require the renaturation step and the additional chromatographic system to remove a fusion contaminant, thereby providing a very useful alternative to conventional expression systems for the preparation of recombinant human EGF.