• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1586-1591
• /
• 2006

조선사는 선주와의 계약에 의한 수주 생산방식으로 계약시 명시된 작업시작일, 도크작업시작일 진수일, 인도일을 지키기 위한 공정별 목표 생산완료일을 결정하게 되고, 각 공장별로 목표 생산완료일을 지키기 위한 일정계획을 수립하게 된다. 생산되는 선박은 선종, 선형에 따라 구성되는 블록의 수가 다르고 그 형태도 매우 다양하다. 그러므로 선박을 건조하기위해 제작되는 블록의 정확한 작업공기와 공수를 예측하기가 매우 어렵다. 본 논문에서는 불확실한 작업공기와 공수를 이용하여 작업장의 공간제약을 고려한 일정계획을 수립하는 문제에 대하여 기존의 공간제약 문제에 대한 연구에서 나아가 실행 단계에서의 운영프로세스를 개선하여 적용하는 연구를 수행하였다. 이번 연구의 결과로 목표 생산계획과 부서계획, 실행 실적을 과거 데이터와 비교분석 하여 개선된 운영프로세스의 효과를 검증하였다.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.63-70
• /
• 2004

Port operation is largely divided into gate operation, yard operation and berth operation. Operation strategy and optimal resource allocation for three parts are important in the productivity of the port operation.. Especially the resource allocation planning in berth operation needs optimization, because it is directly connected with the processing time in shipping. Berth planning is not independent on recourse allocation but interrelated with yard stacking area allocation. Therefore, we design the optimized module of berth planning and give priority to interrelationship with yard space allocation, while existing studies design independent resource allocation in berth planning. We suggest constraints by mathematical method, and they are related to yard stacking area allocation with existing constraints. Then we look for solutions, use tabu search to optimize them, and design optimized the berth planning module. In the performance test of optimized module design of berth planning, we find that the berth planning with yard stacking area allocation takes less processing time than without yard stacking area allocation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.47-50
• /
• 2002

선반건조 일정계획에 있어서 탑재 공정은 전체 생산일정 계획 중 선박 한 척에 대한 계획의 시발점이 되며, 병목현상 등을 유발하여 다른 일정에 가장 큰 영향을 주게 되는 공정이다. 최근 많은 조선소에서 하나의 Dock 내에서 두 착 이상의 배를 동시에 건조하는 tandem 방식을 택하고 있어 dock 내의 한정된 Crane 의 개수와 Crane의 Capacity, 공수 등의 자원, 그리고 작업환경에서 일어날 수 있는 여러 가지 변수들을 제대로 고려하지 못 했을 시에는 일정의 차질과 Dock의 회전율을 떨어트리게 한다. 본 논문에서는 가상공간에 하나의 Dock 를 만들어서 일정계획에서 작성한 Network를 사용하여 실제 작업하게 해서 그 Network가 현장에서의 최적한가를 점검하게 하고 현장에서 수정하는 작업을 줄이게 하는 것의 방법으로 simulation을 개발하였다.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.457-464
• /
• 2006

Remarshalling operation is one of the operations considered important in an automated container terminal to perform quickly loading operations and delivery operations. It arranges the containers scattered at a verticla yard block in order to reduce the transfer time and the rehandling time of ATC(Automated Transfer Crane)s. This paper deals with the remarshalling planning problem minimizing the weighted operation time. This problem can be decomposed into 2 subproblems, storage space assignment problem and operation sequencing problem Storage space assignment problem decides to where containers are transported in terms of transportation time cost.. With results of a previous subproblem, operation sequence problem determines the ATC operation sequence, which minimizes the dead-heading of ATC This study formulates each subproblem with mixed integer program and dynamic program. To illustrate the proposed model, we propose an instance to explain the process of remarshalling planning.

• Archives of design research
• /
• v.14
• /
• pp.141-150
• /
• 1996

In recent years space planning for modern city has been accomplished through scientific high technique and computer supported collaborative work. Relatively human being is treated as a component of the space or whole building and according to the social structure people tend to prefer private space. The necessity of the open space as an active place is emphasized now because the interaction created between users of the space and the nature, surrounding environment can influence on improving quality of outdoor life and giving the place specific identity. In this paper three ways of analyses of components which compose the open space are studied. Especially through the process of analyses derived from differenet areas, the necessity of communication model in collaborative work is proposed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.63-70
• /
• 2012

The collision-free flight planning method based on the extended collision map is proposed for cooperation of multiple unmanned aerial vehicles (UAVs) in a common 3-dimensional workspace. First, a UAV is modeled as a sphere, taking its 3-D motions such as rolling into consideration. We assume that after entering the common workspace, the UAVs move along their straight paths until they depart from the workspace, and that the priorities of the UAVs are determined in advance. According to the assumptions, the collision detection problem between two spheres in $R^3$ can be reduced into the collision detection problem between a circle and a line in $R^2$. For convenience' sake and safety, the collision regions are approximated by collision boxes. Using the collision boxes, the entrance times of the UAVs are scheduled for collision avoidance among the UAVs. By this way, all UAVs can move in the common workspace without collisions with one another. For verifying the effectiveness of the proposed flight planning method, the simulation with 12 UAVs is carried out.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.113-120
• /
• 2016

If there are containers stacked upon the container to be fetched out of a container yard to vessel, rehandling which moves those containers to other places temporarily is needed. In order to avoid such rehandling, remarshalling which rearranges containers should be done before the vessel arrives. The remarshalling plan is commonly generated within a bay. It happens, however, that the generation of the intra-bay remarshalling plan within the permitted time is not possible because of bad stacking conditions. This paper presents the remarshalling algorithm which uses the empty slots of the neighboring bay as a temporary storage space. Simulation experiments have shown that the presented algorithm can generate the remarshalling plan within the permitted time under any staking conditions.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.23-32
• /
• 2011

Domestic leading construction companies has been establishing and performing TACT scheduling method, similar to linear scheduling model such as line of balance and repetitive schedule, and etc. in which repetitive construction works are involved like high-rise building. Linear scheduling model has been researched as a visual scheduling method presenting the work space and time information. Likewise scheduling constraints of CPM network such as finish-to-finish, start-to-start, finish-to-start, start-to-start, linear scheduling model also has the relationships constraints, namely boundary conditions, between activities. It is especially necessary to define the boundary conditions of the activities' relationships in order to apply the linear scheduling model to be compatible with the network schedule. Therefore, this research considers the boundary conditions between activities for establishing the linear scheduling model. This paper also applies the proposed boundary conditions to TACT schedule and then deduces the main considerations in order to establish and perform TACT schedule.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.493-495
• /
• 2004

본 논문은 도시계획과정에서 도시설계안을 행정가, 설계자, 지주, 인근거주자 등에게 제시하고 이들의 요구사항을 실시간으로 반영할 수 있는 도시설계를 위한 가상현실 협업시스템인 AR-Station을 소개한다. 본 시스템은 다양한 참여자들 간의 원활한 의사소통과 협업을 위하여 가상 도시 모델을 시각화하기 위한 Hybrid Scene Graph와 직관적인 인터랙션을 제공하기 위한 탠저블 인터페이스를 사용한다. 참여자들의 작업공간은 시스템과 참여자들 사에의 상호작용이 효율적으로 이루어지도록 반영공간과 인터랙션공간으로 구분하여 설계하고 구현하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.454-463
• /
• 2013

Upon changing architectural education system into 5-year program, the design studio in university should meet the requirement in order to acquire the accredition. This study investigates on student' perceptions and responses, according to the configuration(open, mixed, closed), to their studio environment. Results and suggestions are as follows for all types: First, there should be space for individual activities for the student: Second, excluding space for excluding space for the individual work, seperated area must be provided for co-operative work, such as making models; Third, a clear territorial distintion between the individual and the co-work space should be able to set by the students, using. for instance, movable partition or corridor; Fourth, however, in line with the types, a seperated lecture or seminar room in the open type, a device to prevent distraction such as noise in the mixed type, and more space for co-work in the closed type are also suggested.