• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.394-399
• /
• 2008

An integral imaging system enabling enhanced depth of field by incorporating a pair of liquid-crystal (LC) lens arrays was proposed and demonstrated. The lens arrays exhibit two different refractive indexes depending on the light polarization. The proposed LC lens array I and II were implemented by depositing a ZLI-4119 LC and an E-7 LC, respectively, on top of a lens-array substrate in glass. When the two LC lens arrays were aligned appropriately, a birefringence was obtained for a specific light polarization in such a way that the incoming light sees different refractive indexes for them. As a result, the focal length associated with the imaging system utilizing the LC lens arrays was adaptively varied, thereby enhancing the depth of field for the image reconstruction. We have theoretically analyzed the proposed integral imaging system with the $LightTools^{(R)}$ to confirm that the focal length could be adjusted with the help of the birefringent lens array. Finally the proposed imaging system successfully reconstructed the objects. The birefringent lens array employing the ZLI-4119 LC produced a real image with the focal length of 680 mm, while the other using the E-7 LC yielded a virtual image with the focal length of -29 mm.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.44-51
• /
• 2016

The powder core, conventionally fabricated from iron particles coated with insulator, showed large eddy current loss under high frequency, because of small specific resistance. To overcome the eddy current loss, the increase in the specific resistance of powder cores was needed. In this study, copper oxide coating onto electrically conductive iron particles was performed using a planetary ball mill to increase the specific resistance. Coating factors were optimized by the Response surface methodology. The independent variables were the CuO mass fraction, mill revolution number, coating time, ball size, ball mass and sample mass. The response variable was the specific resistance. The optimization of six factors by the fractional factorial design indicated that CuO mass fraction, mill revolution number, and coating time were the key factors. The levels of these three factors were selected by the three-factors full factorial design and steepest ascent method. The steepest ascent method was used to approach the optimum range for maximum specific resistance. The Box-Behnken design was finally used to analyze the response surfaces of the screened factors for further optimization. The results of the Box-Behnken design showed that the CuO mass fraction and mill revolution number were the main factors affecting the efficiency of coating process. As the CuO mass fraction increased, the specific resistance increased. In contrast, the specific resistance increased with decreasing mill revolution number. The process optimization results revealed a high agreement between the experimental and the predicted data ($Adj-R^2=0.944$). The optimized CuO mass fraction, mill revolution number, and coating time were 0.4, 200 rpm, and 15 min, respectively. The measured value of the specific resistance of the coated pellet under the optimized conditions of the maximum specific resistance was $530k{\Omega}{\cdot}cm$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.1
• /
• pp.97-105
• /
• 2014

This study attempts to review the theories and related literatures on crowd funding and build the framework to understand the core concepts of crowd funding. In addition, I explore the applicability of crowd funding platforms for start-ups. For this purpose, I analyze the framework based on the life cycles of projects on crowd funding with the components of stake-holders. Furthermore, I review the results of previous outstanding literature on pros and cons of crowd funding to identify the applicability of crowd funding for start-ups. The results show that the use of crowd funding platform alleviates the risks involved with the information goods which occupy major portion of the projects listed on crowd funding have unique cost structure with high fixed cost and very low variable cost. Consequently, crowd funding is identified as a platform for start-ups of information goods by leveraging the wisdom of crowd. However, crowd funding may not work as an effective platform for start-ups if group thinking emerges. The study provides an implication that it provides a framework for understanding crowd funding and its applicability for start-ups, which can support government's policy for creative economy. Additional empirical research analyzing the data on the projects listed on crowd funding platforms in Korea will be performed in the succeeding study.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.262-268
• /
• 2019

BACKGROUND: To investigate mineralization characteristics of organic resources in the soil, five materials (rice straw, cow manure sawdust compost, microorganism compost, mixed oil-cake, and amino acid fertilizer) were treated according to the nitrogen content, and an indoor incubation experiment was conducted for 128 days. The results of this analysis were applied to determine the nitrogen mineralization pattern of these organic resources. METHODS AND RESULTS: During the constant temperature incubation period, the nitrogen net mineralization rate of the organic resources was the highest in the amino acid fertilizer with the highest nitrogen content, and the lowest in the rice straw with the lowest nitrogen content. A positive correlation (0.96) was observed between the potential nitrogen mineralization rate and total nitrogen content. The mineralization rate constant, k, was negatively correlated with the organic matter (-0.96) and carbon content (-0.97). The nitrogen mineralization rate during the first cropping season, as estimated by the model, was 6.6%, 11.6%, 30.9%, 70.7%, and 81.0% for the rice straw, the cow manure sawdust compost, the microorganism compost, the mixed oil-cake, and the amino acid fertilizer, respectively. CONCLUSION: The nitrogen mineralization rate varies depending on the type of organic resources or the nitrogen content; thus, it can be used as an index for determining the nitrogen supply characteristics of the organic resource. Organic resources such as compost with low nitrogen content or those undergoing fermentation contain organic nitrogen. Organic nitrogen is stabilized during the composting process. Therefore, as the nitrogen mineralization rate of these resources is lower than that of non-fermented organic resources, it is desirable to use the fermented organic materials only to improve soil physical properties rather than to supply nutrients for the required amount of fertilizer.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.287-292
• /
• 2007

In general, the response of bulk material is independent of its size when it comes to considering classical elasticity theory. Because the surface to bulk ratio of the large solids is very small, the influence of surface can be negligible. But the surface effect plays important role as the surface to bulk ratio becomes larger, that is, the contribution of the surface effect must be considered in nano-size elements such as thin film or beam structure. Molecular dynamics computation has been a conventional way to analyze these ultra-thin structures but this method is limited to simulate on the order of $10^6{\sim}10^9$ atoms for a few nanoseconds, and besides, very time consuming. Analysis of structures in submicro to micro range(thin-film, wire etc.) is difficult with classical molecular dynamics due to the restriction of computing resources and time. Therefore, in this paper, the continuum-based method is considered to simulate the overall physical and mechanical properties of the structures in nano-scale, especially, for the thin-film.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.293-297
• /
• 2016

This study was conducted to determine the effect of rainfall after cutting on nutritive value of Italian ryegrass (Lolium multiflorum) hay. Fresh Italian ryegrass was treated with 3 days natural rainfall (56.5, 14.0 and 1.6 mm) after cutting without tedding. Rainfall effect on Italian ryegrass quality was evaluated based on Neutral detergent fiber (NDF) and acid detergent fiber (ADF), crude protein (CP), crude fat (CF), crude ash (CA) and non-fiber carbohydrate (NFC). The quality of Italian ryegrass was decreased with extending raining days. The content of neutral detergent fiber (NDF) was increased from 0.4 to 4.7% by 1 day advancement in raining. CF content was decreased from 8.1 to 32.8%. CP and CA contents did not change, but NFC content was decreased from 0.5 to 8.4%. The quality damage by the number of raining days after cutting Italian ryegrass was the lowest on the first day from exposure to rain.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.47-56
• /
• 2020

The sound source localization technique has various application fields in the era of internet-of-things, for which the probe size becomes critical. The localization methods using the acoustic intensity vector has an advantage of downsizing the layout of the array owing to a small finite-difference error for the short distance between adjacent microphones. In this paper, the acoustic intensity vector and the Time Difference of Arrival (TDoA) method are compared in the viewpoint of the localization error in the far-field. The comparison is made according to the change of spacing between adjacent microphones of the three-dimensional microphone array arranged in a tetrahedral shape. An additional test is conducted in the reverberant field by varying the reverberation time to verify the effectiveness of the methods applied to the actual environments. For estimating the TDoA, the Generalized Cross Correlation-Phase transform (GCC-PHAT) algorithm is adopted in the computation. It is found that the mean localization error of the acoustic intensimetry is 2.9° and that of the GCC-PHAT is 7.3° for T₆₀ = 0.4 s, while the error increases as 9.9°, 13.0° for T₆₀ = 1.0 s, respectively. The data supports that a compact array employing the acoustic intensimetry can localize of the sound source in the actual environment with the moderate reflection conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.643-648
• /
• 2010

Portable fuel cells are commonly operated in the dead-end mode because of such as high fuel utilization. However, the performance of such systems deteriorates continuously with an increase in the amount of by-products such as water vapor and nitrogen. In this study, to verify the effect of water vapor on Proton Exchange Membrane Fuel Cells (PEMFCs), constant-load experiments were carried out for a current density of 600 mA/cm2 and a voltage of 0.4 V, respectively. The performance of the cell was more stable under constant voltage conditions than under constant current density conditions. Condensed water accumulated in the anode channel near the cell outlet. The experimental results show how the relative humidity (RH = 0.15, 0.4 and 0.75) of air at the cathode side affect the performance of PEMFCs with dead-end anode. At RH values higher than 0.15, the mean power density increased by up to 51% and the mean purge duration decreased by up to 25% compared to the corresponding initial values.

• Journal of the Korean Geographical Society
• /
• v.35 no.1
• /
• pp.3-15
• /
• 2000

산업화와 더불어 심각해지고 있는 수질오염 문제를 해결하기 위해서는 여러 가지 수질관리 방안이 요구된다. 수질오염이 과거에는 국지적이었으나 점차 광범한 지역으로 확장됨에 다라 지속적인 수질 모니터링에 어려움이 따른다. 본 연구에서는 위성영상을 사용한 원격탐사 기법으로 수역의 수질환경 인자를 추출하고자 한다. 사용된 영상은 Landasat TM이며, 연구지역은 한강하류 지역이다. 수질분석 인자는 클로로필-a, 부유물질, 투명도 등을 선정하였으며, 수면분광반사율의 특징 및 수질인자별 처리기법을 개발하는데 목적을 두었다. 분광특성 분석결과를 요약하면, 첫 번째 스펙트럼 반사율 분석결과 클로로필-a의 농도는 0.4~0.5$\mu\textrm{m}$ 파장대역에서 낮은 반사치 경향을 보이며, 녹색파장대인 0.57$\mu\textrm{m}$ 부근에서 반사율이 높아진다. 두 번째 부유물질의 반사도는 농도가 증가할수록 0.8$\mu\textrm{m}$ 부근에서 상대적으로 낮은 반사율이 나타난다. 마지막으로 투명도가 낮은 수면은 0.55$\mu\textrm{m}$에서 높은 반사율 경향을 보인다. Landsat TM영상을 이용하여 주성분분석 및 비연산처리를 실시하여 수질분석을 시도한 결과를 보면 클로로필-a와 투명도는 제1주성분 영상 및 제2주성분 영상에서 현장 실측자료와 유사한 결과를 얻을 수 있었으며, 부유물질은 밴드 2와 밴드 4의 비연산처리를 통하여 분포도를 작성할 수 있었다. 이상의 결과들은 계절적 및 시간적 변화에 따라 파장대역이 달라질 수 있다. 그러므로 위성자료를 이용하여 보다 정확한 수질환경 인자를 추출하기 위해서는 현장실측 및 수역의 분광반사 특성을 지속적으로 조사하여야 한다.때문으로 경주 산사태와 포함-구릉포간 국도면의 산사태가 이 종류의 산사태에 속한다.열 인식의 신뢰도를 향상시킬수 있는 방법을 제안하였다.작성하여 최신 의료영상 처리 기법을 쉽게 임상에 적용하고 실험할 수 있는 장점이 있다. 지대에서 가능하였고, 파종기는 중생종보다 이르게 나타났다. 등숙만한출수기 기준의 안전작기는 조생종과 중생종은 태백고냉지대와 태백준고냉지대, 소백산간지대 일부지역을 제외한 다른 지역에서 설정되었고, 중만생종은 태백고냉지대, 태백준고냉지대, 동해안북부지대, 소백산간지대, 노령소백산간지대의 일부 지역은 벼 담수직파가 불가능하게 판단되었다. information on the regular basis of time and provide it when the users query over the Web-database gateway. The other approach is a shopping agent mechanism, which stores information on "how to shop" and the shopping agent collects the information of product items just after users query about the product and provide the information in real time or notify them by alerting service. Thirty nine shopping information services are compared and classified in this paper and they are extracted from "Naver" and "Yahoo! Korea". The final result shows that most services are just a

• Journal of Radiation Protection and Research
• /
• v.21 no.2
• /
• pp.125-129
• /
• 1996

The energy response of HPGe detector for low energy Photons was determined by using three Monte Carlo codes. MCNP4A. EGS4, and CYLTRAN in ITS3. In this study. bare HPGe detector$(100 mm^2{\times}10mm)$ was used and a pencil beam was incident perpendicularly on the center of the detector surface. The photopeak efficiency, $K_{\alpha}$ and $K_{\beta}$ escape fractions were calculated as a function of incident X-ray energies ranging from 12 to 60 keV in 2-keV increments. Since the Compton. elastic. ana penetration fraction were negligible in this energy range. they were ignored in the calculation. Although MCNP. EGS, and CYLTRAN codes calculated slightly different energy response of HPGe detector for low energy Photons, it appears that the three Monte Carlo codes can Predict the low energy Photon scattering Processes accurately. The MCNP results, which are generally known as to be less accurate at low energy ranges than the EGS and ITS results. are comparable to the results of EGS and ITS and are applicable to the calculation of the low energy response data of a detector.