• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.528-532
• /
• 1987

Closed-loop fiber-optic gyroscope with linear scale factor for a wide dynamic range is demonstrated using a gating process and two-harmonic phase modulation, of which the second harmonic is obtained by a frequency doubler. Also the effects of the second harmonic and duty cycle of gating signal on the linearity of scale factor are estimated theoretically and compared with the measured data. The experimental results show the best linearity of scale factor is about 0.5% within the rotation rate 90.deg./sec. The closed-loop fiber-optic gyroscope with gated two-harmonic phase modulation can be used in the application demanding less sensitive performance and modest scale factor linearity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.463-470
• /
• 2005

This paper describes a method aimed at improving dead-reckoning accuracy with gyroscopes in mobile robots. The method is a precision calibration procedure for gyroscopes, which effectively reduces the ill effects of nonlinearity of the scale-factor and temperature dependency. This paper also describes the methods of gyro data collection fur all ambient temperature$(-40^{\circ}C{\~}+80^{\circ}C)$ using cubic spline interpolation and defining the error function. The sensor used was a vibrating gyroscope called the EWTS82NA21, which is low lost and commonly used in car navigation system, made by Panasonic. This angular rate sensor utilizes Coriolis force generated by a vibrating tuning fork. The paper also provides experimental results to check the performance and the effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.30-36
• /
• 2003

Driving and pick-off using electromagnetic force for a cylindrical vibratory gyroscope is considered. A gyroscope consisting of thin cylindrical vibrating element and electromagnetic drive and pick-off element is designed, fabricated and tested. The results of the proposed pick-off method were compared with the results of the highly precise laser interferometer and eddy current sensor as it was used as the reference standard. Through the experiment, it is verified that the proposed electromagnetic driving and pick-off method can be an effective alternative to conventional electrostatic or piezo-electric methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.611-612
• /
• 2019

각 X, Y, Z축들의 이동거리, 가속도, 방향등을 측정하여 수치로 표현해주는 9축 자이로스코프를 이용하여 단순히 자세를 분석만 하는 기존의 프로그램과는 달리 타이거 우즈 같은 세계적인 선수들의 자세와 비교를 하여 사용자에게 만족을 줄 수 있는 시스템을 개발한다. 이 어플리케이션의 핵심 기술은 그 무엇보다도 두 벡터 그래프의 유사도를 비교해주는 알고리즘을 얼마나 효율적으로 설계를 할 것인지와 이 기법을 유니티3D를 통해 구현해 내는 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.1
• /
• pp.86-92
• /
• 2012

The well-used actuators for the attitude control of spacecrafts are thruster, reaction wheel, control moment gyroscope, and magnetic torquer. Among them, the control moment gyroscope(CMG) which generates the torque based on the gyroscopic principle in physics, has an advantage of the high torque output compared to the low power consumption. This paper introduces an outline of CMG hardware technology, its application history in spacecrafts, and their associated hardware characteristics. Moreover, its spin-off cases to the other industrial fields such as ship, robotics, and MEMS including their research trend are provided.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1603-1615
• /
• 2018

In order to achieve the low complexity and area, power in the design of Optical Image Stabilization (OIS) suitable for the smart phone, this paper presents the following design explorations, such as; optimization of gyroscope sampling rate, simple and accurate gyroscope filters, and reduced operating frequency of motion compensation, optimized bit width in ADC and DAC, evaluation of noise effects due to PWM driving. In experiments of gyroscope sampling frequencies, it is found that error values are unvaried in the frequency above 5KHz. The gyroscope filter is efficiently designed by combining the Fuzzy algorithm, to illustrate the reasonable compensation for the angle and phase errors. Further, in the PWM design, the power consumption of 2MHz driving is shown to decrease up to 50% with respect to the linear driving, and the imaging noises are reduced in the driving frequency above 2MHz driving frequency. The operating frequency could be reduced to 5KHz in controller and 10KHz in driver, respectively, in the motion compensation. For ADC and DAC, the optimized exploration experiments verify the minimum bit width of 11bits in ADC as well as 10bits in DAC without the performance degradation.

• Journal of Korea Game Society
• /
• v.17 no.6
• /
• pp.29-38
• /
• 2017

Predicting the user's reaction to the game at the stage of developing the game is important because it is related to the popularity of the game. In this paper, we propose a system that can collect and analyze game user's biometric information in a non-invasive way. To this end, we developed a mouse with skin conductance, pressure, gyroscope, and accelerometer sensor using Arduino. In order to verify the usefulness of this system, the subject was experimented with playing the first person shooter game with this mouse. We analyzed the gameplay videos recorded during Blizzard's 'OverWatch' and the bio-information collected from various sensors in the mouse.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.365-372
• /
• 2017

The rolling motion of a floating body makes crews and passengers exhausted and/or applies forces to the structure to cause damage; it might even upset the body. Therefore, almost all ships are equipped with bilge keels for anti-rolling; in special cases, an anti-rolling tank(ART) or fin stabilizer or gyroscope could be installed. But an ART requires a large capacity to install it, and a fin stabilizer and gyroscope need great costs to install and also many expenses to operate. The authors suggest the use of an anti-rolling pendulum(ARP), and they showed that the ARP is effective to reduce rolling by experiments and via a Runge-Kutta analysis. This paper introduces the linearized 2 degrees of freedom with a viscous damping system for a ship equipped with ARP; it also shows the validation of the linearized analysis for the ship's roll motion. The paper proposes an optimum ARP on the basis of the justified model. The case of the 7.7kg model with ship 20g ARP of a mass ratio of 0.26%, is the most effective for reducing roll motion. The paper shows the ARPs with various mass ratios are effective for reducing the roll motion of a ship by free decaying roll experiments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.275-282
• /
• 2024

This paper proposes an app-based feeder that performs functions such as distributing food and measuring exercise amount and a wearable collar that measures activity level to manage pet obesity in modern society where the obesity rate of pets is increasing. The wearable collar measures the pet's activity level and suggests the appropriate amount of food based on the average daily activity level. We studied an app-based pet feeding system that can provide the appropriate amount of feed per day through an app to enable obesity management even in unexpected situations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.643-648
• /
• 1988

A strapdown inertial navigation system fabrication utilizing dynamically tuned gyroscope was finished as a first stage development. So it's design, fabrication and tests are reported. Although this system lacks in accuracy compared with the cimballed system, factors such as low cost, small size and lightness make it useable in wide range of applications. The initial cost for investment is relatively cheap, and so it is best suitable for local development in various kind of inertial navigation system. Since all of the locally used systems are imported and even with it's close relation to the military, foreign technical transfer is practically non-existent. The independent local development of such system at a time of domestic initation in aerospace and defense industry, can be seen as a significant milestone in the advancement of the inertial navigaion system field.