• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.664-668
• /
• 2008

본 연구에서는 비정상상태 자유수면 모의를 위해 2차원 유한체적법을 이용한 수치모형을 개발하였으며, 이론적인 해석해 및 수리실험을 통한 실측자료를 이용하여 검증하였다. 개발된 모형은 지배방정식으로 비선형 및 보존형 2차원 천수방정식(shallow water equation)을 이용하였으며, 동적메모리 할당 기능이 포함된 Fortran-90으로 코딩되었다. 또한 구조화된 격자 및 비구조화 격자 시스템에도 적용될 수 있도록 모형을 구성하였으며, 불규칙한 하상지형에 의해 수치진동을 감소시키기 위해 본 모형에 well-balanced HLLC 기법을 적용하였다. 모형의 적용성을 검증하기 위하여 1차원의 경우 젖은/마른 하상 조건하에서의 댐 붕괴파 문제와 하상이 변화하는 지형 구간을 통과할 때 발생되는 천이류에 대한 문제 그리고 시간에 따라 변화하는 수위와 지형 조건에서의 wetting & drying에 대한 문제에 적용하였으며, 2차원의 경우 전통적인 댐 붕괴파 문제 및 구조물에 미치는 댐 붕괴파의 영향에 대한 수리모형실험을 통한 실측자료를 이용하여 검증하였다. 검증결과 본 모형을 통해 계산된 수치해는 이론적인 해석해와 실측자료에 거의 정확히 일치하였으며, 향후 실제 하천 자료를 이용하여 모형의 현장 적용성을 검증할 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• Nuclear Engineering and Technology
• /
• v.3 no.1
• /
• pp.21-31
• /
• 1971

The part of the work of plastic deformation of metal goes into the changes in the total surface free energy. This contribution is dependent on the specific surface free energy, which is affected by the environment. Based on thermodynamical approach, volume constancy requirement and adsorption induced two distinct dislocation interaction mechanisms for strengthening or weakening of metals at surface, theoretical derivation has been made to show that the environmental contribution on the strain hardening, the stress and the energy required for plastic deformation can be expressed in terms of solid surface tension in vacuum (${\gamma}$$_{s}$), interfacial tension (${\gamma}$$_{se}$ ), surface dislocation density ($\rho$$_{s}$), internal dislocation density ($\rho$$_{i}$) and fraction of surface site uncoverage (f). On the basis of theoretical derivation, the various mechanical behaviours under different environments are predicted.d.d.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.916-921
• /
• 2001

형상기억합금 선(Shape Memory Alloy Fibers ： SMA Fibers)을 삽입한 복합재료 평판의 고온 환경에서의 열적 좌굴 및 진동 해석을 유한요소법을 이용하여 수행하였다 1 차 전단변형이론을 적용하여 적층판을 모델링하였고, 온도 변화 효과는 적층판의 전 영역에서 균일한 온도 분포로 가정하였다. 형상기억합금 선의 온도에 대한 비선형 재료 성질을 고려하여 열적 좌굴 해석 수행 시 반복 계산법을 이용하였고, 자유 진동 해석에서는 시스템의 자유도를 줄이기 위하여 Guyan-Reduction(CR)을 사용하였다. 온도 변화와 형상기억합금 선의 체적비(volume fraction) 및 초기 변형률(initial strain) 변화에 따른 임계 온도와 고유 진동수의 특성을 해석하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.106-111
• /
• 2000

The residual stresses in molded plastic parts can be divided into the flow induced residual stresses produced in flowing stages and the thermally induced residual stresses produced in cooling state. Reducing residual stresses in the final parts is one of the goals in recent study. The present study focused on comparing the predicted values for thermal residual stresses in freely and constrained quenched plastic plates with and without free volume theory. As a result the final residual stresses showed the opposite pattern in thickness direction. furthermore by applying free volume theory the predicted residual stress at the center showed about 50% of the values without free volume theory for constrained quenched case.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.87-94
• /
• 2009

Volume of concrete slab changes by variations of temperature and moisture after its placement. Shrinkage due to evaporation causes tensile stress in the slab when contraction of the slab is restrained by its self weight, friction with subbase, and etc. Actual tensile stress caused by the shrinkage was less than theoretically predicted stress according to previous studies. It was the stress reduction due to visco-elastic property of the early-age concrete slab partially restrained. In this study, strains of restrained circumferential, unrestrained circumferential, and unrestrained square pillar concrete specimens were measured to investigate stress reduction of the specimens with age of concrete. Elastic modulus of the concrete was measured at the age of 1, 3, 7, 14, 28 days and penetration test was performed. The stress reduction was calculated by input the test results into theoretical equations suggested by previous researchers. The stress reduction of the restrained concrete specimens will be applied to design of concrete pavements based on results of the study.

• Journal of Korean Philosophical Society
• /
• v.123
• /
• pp.57-86
• /
• 2012

Many contemporary philosophers argue that modern philosophy is only the philosophy being imprisoned in subject and consciousness without communicating other subjects with language. They criticize that it is solipsistic. Today, those who are taking part in the communication theory, hermeneutics, and de-constructivism are trying to overcome this problem. The practical philosophers, especially those who advocate communintarianism criticize that modern libertarianism is not free from the isolated autonomy and breaks the solidarity of the traditional community with treating formally others. They criticize Kant's philosophy in the same way. But it is unreasonable. Because Kant was not the philosopher who pursued the same philosophy of subjectivity and liberalism as the earlier modern philosophers pursued. He tried to criticize its limits and overcome them. Especially he did not remain within the modern subjectivity, but rather tried to come up with the inter-subjectivity communicating between subjects. He showed this side through the 'sensus communis'. He thought of a judgement of taste as an effect resulting from the free play between imagination and understanding, and postulated the 'sensus communis' as a ground of the universal validity of this judgement. Therefore this 'sensus communis' is the subjective principle of a judgement of taste. Furthermore, he did not treat this 'sensus communis' merely as a self-relation of a subject, but rather developed it into an communicative relation among subjects. This position of Kant enables us to seek the harmony between the aesthetic sphere and social-moral sphere, and to overcome the conflicts between the autonomy of the liberalism and the solidarity of the communitarianism. Especially, his 'sensus communis' can be developed into the 'critical hermeneutics' and the 'relational autonomy'. Therefore his 'sensus communis' has the possibility to overcome the negative points of the traditional community and the modern community, and to overcome the conflicts among the isolated selves occurring in today's society. Hence Kant's 'sensus communis' has still the important values in the contemporary philosophy, especially in the practical philosophy being now discussed over the relation between autonomy and solidarity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2342-2354
• /
• 2002

The present study has numerically predicted both the flow -induced and thermally-induced residual stresses and birefringence in injection o. injection/compression molded center -gated disks. Analysis system for entire molding process was developed based on an ap propriate physical modeling including a nonlinear viscoelastic fluid model, stress-optical law, a linear viscoelastic solid model, free volume theory for density relaxation phenomena and a photoviscoelasticity and so on. Part I presents physical modeling a nd typical numerical analysis results of residual stresses and birefringence in the injection molded center-gated disk. Thermal residual stress was found to be extensional near the center, compressive near the surface and tend to become toward tensional at the surface. A double-hump profile was obtained across the thickness in birefringence distribution: nonzero birefringence is found to be thermally induced, the outer peak is due to the shear flow and subsequent stress relaxation during the filling stage a nd the inner peak is due to the additional shear flow and stress relaxation during the packing stage. Predicted birefringence including both the flow -induced and thermally-induced one becomes quite similar to the experimental one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2355-2363
• /
• 2002

The accompanying paper, Part 1, has presented the physical modeling and basic numerical analysis results of both the flow-induced and thermally-induced residual stress and birefringence in injection molded center gated disks. The present paper, Part II, has attempted to investigate the effects of various processing conditions of injection/compression molding process on the residual stress and birefringence. The birefringence is significantly affected by injection melt temperature, packing pressure and packing time. Birefringence in the shell layer increases as melt temperature gets lower. The inner peak of birefringence increases with packing time and packing pressure. On the other hand, packing pressure, packing time and mold wall temperature affect the thermally-induced residual stress rather significantly in the shell layer, but insignificantly in the core region. Injection/compression molding has been found to reduce the birefringence in comparison with the conventional injection molding process. In particular, mold closing velocity and initial opening thickness in the compression stage of injection/compression molding process have significant effect on the flow-induced birefringence, but not on tile thermal residual stress and the thermally induced birefringence.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.48-59
• /
• 1992

In this paper, the effects of a skirt deformation on the responses of an Air Cushion Vehicle in waves are investigated. The air in the bag and in the plenum chamber is assumed to be compressible and to have a uniform instantaneous pressure distribution in each volume. The free surface deformation is determined in the framework of linear potential theory by replacing the cushion pressure with the pressure patch moving uniformly with an oscillating strength. And the bag-finger skirt is assumed to be deformed due to the pressure disturbance while its surface area remained constant. The restoring force and moment due to the deformation of bag-finger skirt from the equilibrium shape is included in the equations of hearse and pitch motions. The numerical results of motion responses due to various ratios of the bag and cushion pressure or bag-to-finger depth ratios are shown.