• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.23-33
• /
• 2019

A sub-munition which has low aspect ratio does not have flight stability and control of drag force under free-fall condition. In order to satisfy those problems, fin, which is called grid-fin, is designed instead of conventional flight fins and adapted to the sub-munition. The base model of the sub-munition is firstly set and numerical simulation of the model is conducted under transonic condition that is free-fall range of the sub-munition. Wind test is secondly performed to verify the simulation result. The result shows that grid fin adapted sub-munition has high drag force, but the flight stability is still needed. In order to enhance the flight stability, two additional grid-fins are designed which modify web-thickness and numerical simulations of modified models are conducted. As the results, the thinnest web-thickness grid-fin has the highest flight stability and still maintains high drag coefficient. Based on these results, design of grid-fin adapted sub-munition is completed, the path trajectory of the sub-munition can be predicted with acquired aerodynamic datum and it is expected that grid fin can be used to various shape of the flight vehicle and bomb.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.122-129
• /
• 2022

In this study, the hydrophilicity of the metal fiber is improved by introducing an oxygen-containing functional group to the fiber surface after treatment of the metal fiber using the oxygen plasma treatment time as an experimental variable. For the surface modification of metal fibers, changes in surface properties before and after plasma treatment were observed using SEM and x-ray photoelectron spectroscopy (XPS). In order to observe the effect of the plasma treatment time on the surface of the metal fiber, the change in contact angle of the metal fiber with respect to a polar solvent and a non-polar solvent was measured. After calculating the change in surface free energy using the measured contact angle, the contact angle and the surface free energy for metal fibers before and after oxygen plasma treatment were compared, and the correlation with the adhesion work was also considered. The microdroplet specimens were prepared to investigate the effect of surface changes of these metal fibers on the improvement of shear strength at the interface when combined with other materials and the interfacial shear strength was measured, and the correlation with the adhesion work was also identified. Therefore, the oxygen plasma treatment of the metal fiber results in an increase in the physical surface area on the fiber surface and a change in contact angle and surface energy according to the introduction of the oxygen-containing functional group on the surface. This surface hydrophilization resulted in improving the interfacial shear strength with the polymer resin.

• Journal of the Daesoon Academy of Sciences
• /
• v.45
• /
• pp.1-35
• /
• 2023

This study aims at determining the meaning of Life in The Canonical Scripture of the Daesoon Thought upon the ontological bases of occidental philosophies; especially upon those of Plato and Bergson. In western philosophy, the word ontology designates investigating the meanings of being, which is derived from the Greek 'onto (being)' and 'logia (logical discourse).' The various meanings of life have been sought from ancient times all over the world, for these are the critical and vital questions that pertain to the nature of human existence. Plato had asserted that life, in his word, soul, had three different kinds of aspects of meaning. Immortal, reciprocal, and divine. Plato scheme was such that the soul could die, but after death it could became reborn into another various forms of living creatures. The real inner life of humans, the soul, would live eternally. Henri-Louis Bergson, a famous French philosopher from the 20^th century, claimed that life had three different kinds of aspects. Self-identity, Élan vital (vital impetus) and liberty. Bergson insisted especially the real meaning of life had been characterized by "unité multiple et multiplicitéune," "unity as something multiple and multiplicity something singular." The meaning of life in Daesoon Thought could be said to have three different characteristics, solidarity, earthly immortality and grievance-resolution. Some similarities can be found between certain western ontological meanings of life and those of Daesoon Thought. Namely, the qualities of eternity, reciprocity, and divinity.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.1-25
• /
• 2016

This study reviews international discussions about the trade-labor linkage and examines the labor chapters of FTAs enforced by the US and the EU from a comparative perspective. Since early 1990s, starting from the NAFTA, the US has included forceable labor provisions in its FTAs and this trend continues to the TPP which was concluded in October 2015. On the other hand, the EU's labor provisions in its FTAs have been composed of promotional elements on labor rights based on cooperations and dialogues. These different features of labor provisions in the US and European FTAs are mainly due to the motives of the FTAs of the US and the EU respectively as well as their domestic situations with regards to domestic law and institutional set-ups. The coordination of labor provisions involves a long-term institutional as well as regulatory convergence which triggers not only economic but also social changes, compared to a relatively short-term effect of tariff elimination. For Korea which has been a FTA partner country both with the US and the EU, it is significant to keep the different characteristics in the labor provisions in mind, particularly in the process of its implementation. Concerning the implementation of Korea-US FTA, it might be problematic if Korean law and its regulatory practice on labor-management relations do not comply with that of the US. The Korea-EU FTA case can also have an indirect impact on Korea's labor laws since it stipulates in its provisions that both parties should have discussions not only within each government but also with the civil communities including NGOs. Thus, Korea should pay more attention to the true meaning in labor provisions of both FTAs in order to promote its firms to be equipped with the right labor-management system in their operations abroad.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.355-364
• /
• 2023

The arbitrary Lagrangian-Eulerian (ALE) method has been extensively researched owing to its capability to accurately predict the propagation of blast shock waves. Although the use of the ALE method for dynamic analysis can produce unreliable results depending on the mesh size of the finite element, few studies have explored the relationship between the mesh size for the air domain and the accuracy of numerical analysis. In this study, we propose a procedure to calculate the optimal mesh size based on the mean squared error between the maximum blast pressure values obtained from numerical simulations and experiments. Furthermore, we analyze the relationship between the weight of explosive material (TNT) and the optimal mesh size of the air domain. The findings from this study can contribute to estimating the optimal mesh size in blast simulations with various explosion weights and promote the development of advanced blast numerical analysis models.

• Journal of the Korean Society of Radiology
• /
• v.84 no.3
• /
• pp.653-662
• /
• 2023

Purpose This study aimed to determine the incremental value of using a structured report (SR) for US examinations of the pediatric appendix. Materials and Methods Between January 2009 and June 2016, 1150 pediatric patients with suspected appendicitis who underwent US examinations of the appendix were included retrospectively. In November 2012, we developed a five-point scale SR for appendix US examinations. The patients were divided into two groups according to the form of the US report: free-text or SR. The primary clinical outcomes were compared between the two groups, including the rate of CT imaging following US examinations, the negative appendectomy rate (NAR), and the appendiceal perforation rate (PR). Results In total, 550 patients were included in the free-text group and 600 patients in the SR group. The rate of additional CT examinations decreased by 5.3% in the SR group (8.2%, p = 0.003), and the NAR decreased by 8.4% in the SR group (7.8%, p = 0.028). There was no statistical difference in the appendiceal PR (37.6% vs. 48.0%, p = 0.078). Conclusion The use of an SR to evaluate US examinations for suspected pediatric appendicitis results in lower CT use and fewer negative appendectomies without an increase in appendiceal PR.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.

• Sijohaknonchong
• /
• v.23
• /
• pp.213-239
• /
• 2005

Si is a genre which has been steadily loved by Korean, Particularly, 1920's through 1930's, the Revival Movement of Sijo is made by the school of Literary for People, including Choi Namseon, Lee Byeonggi and Lee Eunsang. And Kwon Goohyeon, a member of KAPF, and Han Yongwoon, not belonging to any literary group were interested in Sijo. Kwon Goohyeon, both a member of KAPF and an anarchist has published A Present of Black Room(1927), which is one of the two published in 1920's-1920's saw only two volumes of Sijo works be published: Choi Namseon's 108 Agony(1926) and Kwon's. However, Kwon Goohyeon's work has not been illuminated. compared with Choi Namseon's and the Revival Movement Sijo by the school of Literary for People. It is because Korean literary world has been under the anti-communism ideology since the Liberation of Korea. However, it caused to explore proletarianism Sijo (Joh woon) and proletarianism poetry (Park Yeonghee) that Kwon is a memeber of KAPF and an anarchist. Han Yongwoon, not belonging to any literary group, was very famous as the poet of My Belolved One's Silence(1926), not as a Sijo poet. It means that he s not been illuminated as a Sijo poet. However, his Sijo is enough to contain his various features such as a man of Independence Movement, a Buddhist monk, a lyrical poet and so on. His first Sijo is For Planting Mookoonghwa-Poetry Written in Prison(1922), which has been published four years prior to My Beloved One's. And his affection on Sijo is inferred from the fact that he has constantly published Sijo more than free verse. The aim this thesis is to find out a position of Sijo 1920's through 1930's from a study on Kwon Goohyeon's and Han Yongwoon's Sijo. Sijo, Korean traditional literary genre, was written by most of the poets including not only the school of Literary for People but Kwon Goohyeon and Han Yongwoon 1920's through 1930's. As a result, the writing of Sijo was not a partial movement by the anti-KAPF group, but by a paradigm in 1920's through 1930's.

• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.244-258
• /
• 1995

아기의 출생은 부모에게 환경적, 신체적, 정신적 부담을 준다. 이렇게 부모가 된 사람들은 부모역할 수행시 어려움을 겪고 있고, 그 중에서도 어머니가 아버지보다 역할수행시 더 많은 어려 움을 겪고 있다고 한다. 본 연구는 생후 8개월 된 아기 어머니들을 대상으로 역할이 론을 토대로 모성역할 획득에 영향을 주는 요인들로 가설적 모형을 구축하고, 이의 적합성을 검정하므로 써 어머니들의 모성역할 획득을 촉진하기 위하여 필요한 간호 정보를 제공하려고 한다. 본 연구는 문헌고찰을 통하여 모성역할 긴장과 모성역할 획득에 영향을 주는 요인으로 일상생활의 시간적 여유, 아기 기질, 사회적 지지가 포함되었고, 모성역할 긴장이 모성역할 획득에 영향을 주는 것으로 이론적 기틀을 구성하였다. 연구도구로는 모성역할 획득 중 모성 정체감을 측정하기 위해 Osgood(Walker et al., 1986a에서 인용)도구, 모성역할 수행을 측정하기 위해 수정보완 된 Gibaud-Wallston(1977)도구와 어머니가 지각한 모아 상호작용정도 도구를 이용하였고, 모성역할 긴장측정에는 수정 보완된 Hobbs(정, 1985에서 인용)도구를 이용하였다. 아기 기질은 수정 보완한 The degree of thor inventory(Mercer, 1986 에서 인용), 남편의 정신적지지 측정은Taylor(Durrett, 1986에서 인용)의 도구를 이용하였고, 일상생활의 시간적 여유, 남편의 신체적 지지 및 주위의 지지측정은 연구자가 개발한 도구를 사용하였다. 1993년 1월부터 1994년 1월까지 대전시 5개 보건소에 등록된 대상자들에게 우편으로 설문지를 보내어 221명이 회수되어 회수율이 약72%였다. 일반적인 서술적 자료 분석은 SPSS PC+ 를 이용하였고, 가설적 모형은PC-LISREL 7.13 (Joreskkog & Sorbom,1988)프로그램을 이용하여 공변량구조분석을 하였다. 연구결과는 다음과 같다. 모성역할 획득에 모성역할 긴장, 일상생활의 시간적 여유, 아기 기질, 사회적 지지가 영향을 주며, 모성역할 긴장에는 일상생활의 시간적 여유, 아기 기질, 사회적지지가 영향을 준다고 설정된 가설적 모형〈Figure 1〉의 분석 결과 전반적 지수는 자유도 23에 카이자승치 60.17, GFI와 AGFI의 값은 .944, .891였고, NFI와 NNFI의 값은 .8823, .7932 이었다. 그러나 세부적 지수 중 모성역할 긴장에서 모성역할획득으로의 경로, 일상생활의 시간적 여유에서 모성역할 획득으로의 경로, 아기 기질에서 모성역할 획득으로의 경로의 고정지수가 절대치 2에 미치지 못하여, 세 경로계수를 영(0)으로 고정시킬 필요가 있었다. 따라서 더 간명하며 부합도가 좋은 모형을 찾기 위하여 가설적모형에서 고정지수가 낮은 경로 부터 고정시켜 나가 세경로(모성 역할 긴장에서 모성역할 획득, 일상생활의 시간적 여유에서 모성역할 획득, 아기 기질에서 모성역할획득)를 고정시킨 수정 모형 의 PFI (간명도)가 .5986으로서 가설적모형의 PFI(간명도) .5636보다 커 부합도 를 손상하지 않고 더 간명한 모형으로 나타났다. 수정모형 의 고정 지수를 살펴 본 결과 절대 치 2에 미치지 못하는 경로는 나타나지 않았다. 공변량구조분석 결과 나타난 변인간의 관계를 보면 가) 모성역할 긴장은 사회적 지지가 많을수록(Lisrel Estimates=-1.591), 아기 기질이 순하다고 생각할수록(Lisrel Estimates=-.266), 일상생활의 시간적 여유가 많을수록(Lisrel Estimstes=-1.771) 낮았고, 나) 모성역할 획득은 사회적 지지가 많을수록(Lisrel Estimates=1.120) 잘 되었다.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2008

The purpose of this study was to investigate kinematic coordination and control of lower segments in skill process. For the investigation, we examined the difference of resultant linear velocity of segments and angle vs angle graph. Novice subjects were 9 male middle school students who has never been experienced a taekwondo and expert subjects were 7 university taekwondo players. We analyzed kinematic variables of Dollyochagi motion through videographical analysis and the conclusion were as follows. 1. Examining the graph of novice subjects' maximal resultant linear velocity of the thigh, shank, and foot segment, as it gets closer to the end of the training, the maximal resultant linear velocity in each segment increased. Statistical analysis showed the following results; thigh segment caused the increase of speed, using the trunk segment's momentum in the latter term of learning, while the shank segment utilized the momentum of the adjacent proximal segment at the beginning of learning, and the foot segment in the middle of learning. 2. Until the point where the knee joint angle is minimum, as the novice group learn the skill, the flexion of knee and hip joints has changed into the form of coordination pattern in phase. On the other hand, the expert group showed continual coordination pattern in phase that the movement sequences were smooth. From the knee joint maximal flexion to impact timing, all novice and expert groups showed coordination pattern out of phase. 3. From the knee joint maximal flexion to impact timing, the ankle joint was fixed and the knee joint was extended to all the novice stages and expert subjects.