• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.51-57
• /
• 1990

There exist residual stresses and deformations in welded structures because of nonuniform temperature distribution. The thermal elasto-plastic analysis is necessary to describe the behavor of the structure during welding. In this paper, we calculated the residual stresses and deformations of the welded beam using the I-dimensional layered beam theory. In the previous 1-dimensional analyses, there were restrictions that the equilibrium conditions which were effective only on beams with infinite length were used, and the boundary conditions could not be considered adequately. But, the layered beam theory based on the incremental finite element method, can overcome these restrictions. On the other hand, in the 2-dimensional analysis, the computing time is large because of many degrees of freedom, and there was inaccuracy in the calculation of welding deformations. However, the layered beam theory can take into account the variation of properties along the depth, and can reduce the degrees of freedom considerably in comparision with the 2-dimensional analysis, and shows good agreement with the experiments.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.2
• /
• pp.23-40
• /
• 1974

Semisubmersible 해양석유시추선의 기본설계에 필요한 파랑중(波浪中)에서 운동(運動)을 계산(計算)하는 이론적방법(理論的方法)을 제시하고 "MOHOLE"과 "SEDCO 1350-F" 석유시추선들의 운동(運動)을 해석하였다. 이 규칙파에서 운동계산을 불규칙해양파(波)에 적용하는 응용해석을 보여주었다. 현재 이론적 방법으로는 6자유도(自由度)의 운동을 해양파의 어떤 방향에 대해서도 정확히 계산할 수 있으며 계산의 정확성은 수조(水槽)에서의 모형선의 운동측정치와 실선(實船)의 운동측정치와 비교하여 증명되었다. 또 현재의 방법은 종전에 개발된 방법보다 더 일반적(一般的)인 경우를 다룰 수 있으며 결과치도 더 정확하다. 극소운동특성을 갖는 해양석유시추선과 부체(浮體)해양구조물의 설계는 경비가 비싸고 시간이 많이 드는 모형실험보다는 유체역학적(流體力學的) Parameters를 신속 정확히 자주 변경 검토해야 하는 기본설계단계에서는 정확한 이론적인 전자계산기에 의한 계산방법이 절실히 필요하다. 예상(豫想)과 같은 부가질량(附加質量)과 감쇠력(減衰力)은 Resonance 운동주기에서만 운동에 영향을 준다. 해양구조물에 작용하는 파력(波力)은 Froude-Krilov force, 부가질량(附加質量) 및 감쇠력(減衰力)과 Restoring force로 구성했으며 규칙파(規則波)에서의 6자유도(自由度) 운동방정식은 본 논문에 제시된 실험측정치(値)와 실험으로 정확도가 증명된 이론치(値)의 부가질량과 감쇠력 계수(係數)를 써서 풀었다. 규칙파(規則波)에서의 계산된 운동을 Pierson Moskowitz 해양파(海洋波) 스펙트럼과 linear superposition principle에 의해 불규칙해양파(不規則海洋波)에서의 운동을 계산하는데 사용했다. 불규칙파(不規則波)에서의 운동은 운동스펙트럼과 통계적 운동치로 나타냈다. 현재의 계산방법은 실제 기본설게에 사용되어 왔으며, 다른 응용분야는 파랑중(波浪中)에서의 파면(波面)과 Deck간(間)의 Clearance, 계류선(係留線)의 동장력(動張力)계산의 기본 Data 및 기본설계의 Draft 등 Parameters를 통(通)한 Optimum Design 등(等)이다. 파(波)의 한 방향(方向)에 대(對)한 전자계산기(電子計算機)(IBM 370 또는 CDC 6400)에 의한 운동계산은 10초(秒)미만밖에 안걸린다. 또 현재의 계산방법은 해양석유시추선뿐 아니라 이와 비슷한 부체(浮體)해양구조물과 Pipe-laying선(船) 또 Supply Boat설계(設計)에도 쓰여지고 있다.

• Korea Trade Review
• /
• v.41 no.1
• /
• pp.159-186
• /
• 2016

This study analyzes the degree of dependency and comparative advantage of each country for intermediate goods trade in East Asia, which predicts the comparative advantage of the intermediate goods trade and fragmentation in East Asia when the FTA arrangement in East Asia is implemented. The results are as follows. First, the share of intra-regional trade in the intermediate goods in East Asia has increased over time, implying the deepening of interdependency in intermediate goods trade within the East Asia. Second, Korea is a net exporter in intermediate goods trade for China and ASEAN, whereas it is a net importer for Japan. Japan is a high net exporter for all East Asia, while China is a net importer for Korea, Japan and ASEAN. If FTA arrangement in East Asia is implemented, Japan and Korea will be key suppliers of the intermediate goods for East Asia, while China and ASEAN will play a role of the manufacturing factory through the import of intermediate goods. Third, Korea has a comparative advantage in intermediate trade of electric and electronics and transport vehicle industry in East Asia. Japan has a comparative advantage in all of electric and electronics, transport vehicle, precision instrument, general machinery industry, whereas China has a comparative advantage only in electric and electronics intermediate trade in East Asia. The intra-industry trade of the intermediate goods in precision instrument, general machinery industry is expected to grow among Korea, Japan and China.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.75-75
• /
• 2010

배변 후 toilet flushing 시 다량의 세균을 포함한 물방울들이 화장실 곳곳으로 퍼지는 현상이 있다. 이러한 현상을 방지하기 위해 변기 뚜껑에 자기 세정 효과를 갖는 초발수 표면을 위해 플라즈마를 이용한 표면 처리가 시도되고 있으며, 이 연구의 일환으로 flushing시의 변기내의 유동 분석을 초고속 카메라를 이용하여 수행하였다. Toilet flushing 시 물 튀김 현상은 육안으로는 잘 관찰하기 어렵지만 최고 1000 frame/sec의 속도를 갖는 CCD camera를 이용하여 정량적으로 물 튀김에 의한 오염 가능성을 촬영 분석하였다, 두 번째로 소변 시의 변기 표면에서의 튀김현상을 분석하기 위하여 소변의 발사각도 및 속도를 가장 실제와 유사한 조건으로 설정하고 이를 상용 전산 유체 역학 소프트웨어인 CFD- ACE+의 자유 표면 계산 기능과 두 가지 유체(액체 및 기체)의 혼합 계산 모델을 사용한 계산 결과와 비교 하였다. 그 결과 변기 표면의 표면장력을 아주 작게 설정한 경우(작은 접촉각, 친수성)에는 중력의 영향을 고려하였음에도 불구하고 소변이 변기에 충돌 후 상부로 상당부분 튀어 올라가는 결과를 얻었다. 여러 가지 각도와 발사 속도, 실제의 인체와 유사한 발사 부위의 형상 변화로 인한 유체 표면의 난류 발생과 이에 따른 변기 표면 충돌 현상 변화 등을 수치적으로 고찰하였다. 한 예로 5.6 mm 직경의 노즐에서 소변이 나오는 경우를 발사 속도 3 m/s, 각도 $10^{\circ}$로 주고 중력을 고려하여 10초 동안을 계산하면, 방뇨 시 toilet bowl 내부에서의 물의 유동과 toilet 표면을 맞고 튀기는 현상을 그림 1과 같이 볼 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.5
• /
• pp.12-18
• /
• 2000

This paper describes the analysis of ultrasonic signal and partial discharge(PD) signal patterns for each location of particle in GIS. The characteristics of the ultrasonic signal and PD signal patterns for each location were as follows; in case of particle on the electrode, large ultrasonic signals and large PD signals occurred in positive half-cycle periodically; in case of particle on the spacer, ultrasonic signals and large PD signals occurred in negative half-cycle periodically; in case of the free moving particle, ultrasonic signals and large PD signals occurred by collision non-periodically. As a result, it was confirmed that particle in GIS could be located by the comparison and analysis of ultrasonic signal and PD signal patterns.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.357-362
• /
• 1998

PWR 정지시 일차계통 수화학 제어의 주요대상은 계통표면에 침적된 부식생성물의 주성분인 비화학양론적 니켈(코발트)페라이트로서, 산성-환원 단계에서 용존수소에 의해 Ni$^{\circ}$ (또는 Co$^{\circ}$)로 환원되고 산성-산화 단계에서 용존산소에 의해 Ni$^{2+}$ (또는 CO$^{2+}$)로 산화되어 이온교환기에 의해 제거된다 본 연구에서는, 니켈 및 코발트 산화물의 25~300 $^{\circ}C$ 환원 또는 산화반응 시 표준자유에너지의 변화 및 용존수소 또는 용존산소의 요구농도를 계산하여, 원자로 정지시 일차계통수 용존 기체의 제어조건을 고찰하였다. 산성-환원 단계의 냉각재 온도인 300~82$^{\circ}C$ 범위에서 용존수소가 충분할 경우 열역학적으로 $^{58}$ Co(또는 $^{60}$Co)Fe$_2$O$_4$$\longrightarrow$Co의 역반응이 억제되므로서 노심외 계통부위 침적이 감소될 수 있기 때문에, 용존수소를 온도에 따라 요구농도 곡선 위로 약간 높게 유지하는 것보다 25~50 cc/kg-$H_2O$로 유지하는 방식이 바람직한 반면, 용존산소를 제공하는 과산화수소 농도가) 2.7 ppm일 때 NiFe$_2$O$_4$$\longrightarrow$Ni$_2$O$_4$(+$\alpha$-Fe$_2$O$_3$) 반응이 일어날 수 있기 때문에, 산성-산화 단계에서는 과산화수소의 냉각재 농도를 이보다 낮게 유지하는 것이 바람직하다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.78-85
• /
• 1994

Impact forces are acting on the fore part of a body entering water and those are function o the shape of the fore part and entrance angle. In this paper, impact forces are computed for the flat faced body with arbitrary entrance angle The geometric characteristics of the wetted surface of the body are complicated. The surface is divided into several smooth parts and each of them is represented by a bi-cubic B-spline. The free surface condition, $\phi=0$, is applied at the undisturbed free surface and he boundary value problem is analized by using Green's function.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1277-1285
• /
• 2015

It has been known that the conventional retaining wall system with timber lagging and H pile has several problems such as the irregular gap between H-piles, cutting or adding to standard timber, back fill over first step excavation, and especially break-down accident at the disjoint of wall system. In the practical excavation, these problems may lead to worker's accident and the inefficiency of construction economy. To solve the above problems, a new method using prefabricated retaining wall was proposed and verified. The characteristics of the new method is to replace timber wall as free-sliding steel-lagging and connector. To check its verification and application, laboratory tests such as bending strength, tensile strength, and fatigue strength were carried out. Also, a pilot test in the field and numerical simulations under various ground conditions were performed. From the researches, it is found that the prefabricated retaining wall plate can be superior to the conventional timber lagging plate in the strength. It is also found that the proposed methods can be effective in the reuse of retaining wall plate and safe in the disjoint of wall system. Finally, it is desired that the proposed method will be effective in the reduction of the imported timbers and helpful in the safety of retaining wall construction.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.237-250
• /
• 2015

Underground structures such as a tunnel have been considered as safer than structures on the ground during earthquake. However, severe damages of underground structures occurred at subway tunnel during 1995 Kobe Earthquake and such damages are gradually increased. In this study, a dynamic behavior of a cut and cover tunnel surrounded by weathered soils is investigated using Mohr-Coulomb Model. Parametric study was carried out for boundary conditions, tensile strength, and earthquake magnitudes. The results of numerical analyses in terms of ground deformations and stresses acting on the lining were quite dependent on the side boundary condition (free or fix conditions) and tensile strength of surrounding soils. The ground was deformed upward at the end of earthquake when the side boundary condition was fixed, whereas residual deformations were not predicted when it was free. When the tensile strength of a soil was set to the same as its cohesion, residual deformation was less than 1cm, regardless of side boundary conditions or input accelerations. In addition to that, stress conditions at the maximum deformation and end of earthquake were within an allowable range and considered as safe. Proper boundary conditions and material properties such as tensile strength are quite important because they may significantly impact on the results of dynamic analyses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.1026-1035
• /
• 1987

The injection molding process is used in the fabrication of a large variety of plastic articles. A numerical simulation of the filling stage along the thickness direction is proposed by combining the free surface boundary condition with the relevant governing equations. The mathematical model is based on the equations of continuity, momentum and energy along with inelastic power-law model and relevant boundary conditions. Due to the significant implications for microstructure development in the pro duct, the fountain effect at the advancing free surface is explicitly taken into consideration in the simulation. The model yields data on free surface shape as well as velocity, pressure, temperature and shear stress distributions within the mold cavity. The rearrangement of the velocity and temperature profiles in the vicinity of the melt front is considered in detail.