• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.1-13.1
• /
• 2009

에어로젤은 인류가 개발한 소재 중에서 가장 가벼운 고체로, 기공률이 90%이상이고 비표면적은 ~1000m2/g, 기공의 크기는 10nm 크기로 이루어진 나노기공 물질이다. 1931년에 Kisley가 물유리로부터 실리카 에어로젤을 합성한 이래로 실리카 에어로젤에 대한 연구가 가장 많이 이루어져왔으며, 단열소재, 흡음재, 체렌코프우주선 디텍터, 반도체의 초저유전소재, 유출된 석유의 정제, 촉매 등에 대한 응용에 대해서도 연구가 많이 이루어져 왔다. 그리고TiO2와 같은 광촉매 에어로젤 소재, 카본 에어로젤 소재등 다양한 나노기공 소재에 대해서도 연구가 이루어지고 있으며, 카본 에어로젤의 경우 나노기공과 비표면적을이용한 전기이중층 커패시터 (EDLC)에 대한 연구도 이루어지고 이다. 본 연구에서는 첫째로, 실리카 에어로젤에 대한 연구결과를 소개하고 이의 단열소재로서의 응용가능성에대하여 언급하고자 한다. 실리카 에어로젤 나노기공 소재의 경우, 기공크기가 10nm크기로 매우 작고 공기의 자유이동길이와 거의 비슷하여서 대류에 의한 열전달을 낮출 수 있으며, 낮은 고체함량으로 인하여 포논에 의한 열전달을 낮출 수 있기 때문에 단열소재로서 최고의 성능을 나타낸다. 하지만, 문제는 높은 기공률로 인한 기계적인 취약성이 문제이다. 따라서 이를 보완하기 위항 섬유로 에어로젤을 보강할 수 있는데, 이를통하여 에어로젤 나노기공소재와 섬유보강에 의한 복합화에 대하여 말하고자 한다. 또 다른 하나의 연구방법은유기-무기 하이브리드 나노기공 소재를 합성하는 것이다. 여기서는하나의 방법으로 MTEOS-TEOS의 하이브리드화와 초임계 건조공정에 의한 나노기공 소재에 대한 연구결과를소개하고자 한다. 마지막으로 카본 에어로젤 나노기공소재의 합성과 나노기공 구조의 제어 및 물성평가에 대한 것을 말하고자하는데, 본 발표에서는 레소시놀과 포름알데히드를 촉매에 의한 중합반응을 통하여 유기 에어로젤 소재를 합성하고 분위기에서탄소화 공정을 통하여 카본에어로젤을 합성하였다. 또한 금속 니켈을 도입하는 것에 의하여 탄소/니켈 복합 하이브리드 에어로젤 소재를 합성하고 슈퍼커패시터 전기화학 특성에 대한 연구결과를 발표하고자 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.46-56
• /
• 1994

The characteristics of flows, temperatures, concentrations of the boron are numerically studied when uniform axial magnetic fields are applied in the Czechralski crucible. The to governing factors to the flow regimes are buoyancy, thermocapillarity, centrifugal forces, magnetic forces, diffusion coefficient and segregation coefficient of the boron. Since the concentration of the boron is so low that buoyancy effects are negligible, it cannot affect the flow and temperature fields. From the fact that the flow fields are rotationally symmetric, two velocity components in the meridional plane and the circumferential velocity are calculated together with the temperature in the steady state. Based on the known velocity and temperature distributions the unsteady concentration distributions of the boron are calculated. As the strength of the magnetic is increased, the flow velocities are decreased. Circumferential velocities are large near the crucible side-wall and in the region below the rotating crystal. Steep temperatures gradient near the edge of the rotating crystal causes the Marangoni convection. It has been found out that the convection characteristics affects the unsteady transport phenomena of the boron.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.465-475
• /
• 2016

The diurnal and semidiurnal tides in the global atmosphere are examined using 3-hourly geopotential height field of the state-of-the-art reanalysis data. Unlike the previous studies, the spatial structure and seasonality of those tides are analyzed from the surface of the earth to the stratosphere. It is found that, at most levels, diurnal tide is strong in the midlatitudes while semidiurnal tide is predominant in the tropics. The former shows strong seasonal cycle with a larger amplitude in summer than in winter in both hemispheres. This is different from the semidiurnal tide which has essentially no seasonal cycle. In term of the vertical structure, while semidiurnal tide has a barotropic structure, diurnal tide exhibits a distinct vertical structure with increased amplitude and height. Especially tropical diurnal tide exhibits a nearly opposite phase from the surface to the free troposphere, and to the upper stratosphere. Its amplitude also varies nonlinearly with height, possibly influenced by water vapor, ozone, gravity waves and solar radiation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.878-885
• /
• 2005

The water jet impingement cooling is one of the techniques to remove the heat from high heat flux equipments. Local heat transfer of the confined water impinging jet and the effect of nozzle collar to enhance the heat transfer are investigated in the fee surface jet and submerged jet. Boiling is initiated from the farthest downstream and increase of the wall temperature is reduced with developing boiling, forming the flat temperature distributions. The reduction in the nozzle-to-surface distance fur H/W$\le$1 causes significant increases and distribution changes of heat transfer. Developed boiling reduces the differences of heat transfer for various conditions. The nozzle collar is employed at the nozzle exit. The distances from heated surface to nozzle collar, Hc are 0.25W, 0.5W and 1.0W. The liquid film thickness is reduced and the velocity of wall jet increases as decreased spacing of collar to heated surface. Heat transfer is enhanced fur region from the stagnation to x/W$\~$8 in the free surface jet and to x/W$\~$5 in the submerged jet. For nucleate boiling region of further downstream, the heat transfer by the nozzle collar is decreased in submerged jet comparing with higher velocity condition. It is because the increased velocity by collar is de-accelerated downstream.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1452-1457
• /
• 2004

The water jet impingement cooling is one of the techniques to remove heat from high heat flux equipments. We investigate the local heat transfer of the confined water impinging jet and the effect of nozzle collar to enhance the heat transfer in the free surface jet and submerged jet. Boiling is initiated from the furthest downstream and the wall temperature increase is reduced with developing boiling, forming the flat temperature distributions. The reduction in the nozzle-to-surface distance for $H/W{\leq}1$ causes the significant increases and distribution changes in heat transfer. Developed boiling reduces the differences in heat transfer for various conditions. The nozzle collar is employed at the nozzle exit. The distances from heated surface to guide plate, $H_c$ are 0.25W, 0.5W and 1.0W. The liquid film thickness is reduced and the velocity of wall jet increase as decreased spacing of collar to heated surface. Heat transfer is enhanced for region from the stagnation to $x/W{\sim}8$ in the free surface jet and to $x/W{\sim}5$ in the submerged jet. For nucleate boiling region of further downstream, the heat transfer by the nozzle collar is decreased in submerged jet compare with higher velocity condition. It is because the increased velocity by collar is de-accelerated at downstream.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.619-628
• /
• 2010

Shape Memory Alloy (SMA) has recently received attention in developing implantable surgical equipments and it is expected to lead the future medical device market by adequately imitating surgeons' flexible and delicate hand movement. However, SMA actuators have not been used widely because of their nonlinear behavior called hysteresis, which makes their control difficult. Hence, we propose a parameter, $t_1$, which is necessary for temperature control, by analyzing the open-loop step response between current and temperature and by comparing it with the values of linear differential equations. $t_1$ is a pole of the transfer function in the invariant linear model in which the input and output are current and temperature, respectively; hence, $t_1$ is found to be related to the state variable used for temperature control. When considering the parameter under heat treatment conditions, $T_{max}$ was found to assume the lowest value, and $t_1$ was irrelevant to the heat treatment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.383-390
• /
• 2020

Since the dynamic behaviors of liquid storage tanks on flexible soil are significantly influenced by the fluid-structure-soil interaction (FSSI), its effects must be rigorously considered for accurate earthquake analysis and seismic design of the storage system. In this study, dynamic analysis is performed for a rectangular liquid storage tank on flexible soil, and its dynamic characteristics are examined by rigorously considering the effects of FSSI. The hydrodynamic force and the interaction force between the structure and soil are evaluated using the finite-element approach. In the evaluations, mid-point integrated finite elements and viscous dampers are considered for energy radiation into the infinite soil. The effective earthquake force is then obtained from free-field analysis. It is thus demonstrated that the earthquake responses of the rectangular liquid storage tank on flexible soil are significantly influenced by the FSSI.