• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.479-491
• /
• 2005

지구환경문제와 에너지 수급관계를 감안할 때, 청정 및 대체에너지 연구개발은 불가피하며, 그 중에서도 태양에너지는 대표적인 대안의 하나로 인식된다. 따라서 태양에너지의 적극적인 활용에 필요한 기초자료의 마련은 필수적이다. 태양에너지의 이용 및 관련 절약 기술에 필요한 태양에너지 자원(기상)에 대한 기술자료는 최소한 30년간의 측정 자료를 필요로 한다. 이들 자료에는 시간별 수평면전 일사량, 법선면 직달일사량 및 수평면 산란일사량은 물론 시간별 평균치로 운량, 기온, 습도 등이 포함된다. 이들 자료로부터 자료의 분포, 평균 및 최고, 최저값 등과 같은 기초자료들을 선별하여 관련 시스템 설계에서 요구하는 기준을 충족하여야 하는 것이다. 그러나 우리나라의 경우, 태양에너지 자원에 대한 정밀한 측정은 1982년 이후 수평면 전일사량, 1990년 이후에서나 법선면 직달일사량에 대하여 본격적으로 이루어진 실정으로, 자료의 표준화 및 신뢰성 확보에는 여전히 상당한 시간과 노력이 요구되는 실정이다. 지속적인 측정과 더불어 요구되는 것으로 측정자료의 가공기술을 들 수 있다. 즉, 측정자료의 품질평가 및 관리 기술, 미측정 또는 불량자료의 복원 기술 및 측정 지역외 자료의 추정을 위한 보간기술 등이다. 이와 같은 기초자료 및 기술에 관한 연구개발은 보다 구체적인 적용에 앞서 필수적으로 이루어져야 할 과제이다.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.515-533
• /
• 2021

Based on the supply location, demand location, and transportation network, aggregate supply-demand characteristics and aggregate distribution status were analyzed from the results of the closest distance, service areas, and location-allocation scenarios using GIS network analysis. As a result, it was found that the average transport distance of aggregates from the supplier was 6 km on average, the average range of 7 km for sand, and 10 km for gravel was found to reach the destination. In particular, the simulated service area covers about 92% in Seoul-Gyeonggi Province, 85% in Busan-Ulsan-Gyeongnam Province, and more than 90% in Daejeon-Sejong-Chungnam Province. These results have a significant implication in quantitatively interpreting primary data on aggregate supply-demand. Furthermore, these results suggest the possibility of a wide-area quantitative analysis of aggregate supply regions necessary for establishing a basic aggregate plan. The results also evaluated by the site-allocation scenario show that aggregate supply may be possible through companies less than 200 with large-amounts quarries, which is the 700 companies currently supplying small amounts of aggregates on the country. Therefore, in terms of distribution of aggregates, a policy approach is needed to form an appropriate market for regions with high and low density of aggregate supply services, and the necessity of regional distribution and re-evaluation is suggested through an aggregate supply analysis demand across the country. Furthermore, in analyzing the supply-demand network for the aggregate market, additional research is needed to establish long-term policies for the aggregate industry and related industries.

• Environmental and Resource Economics Review
• /
• v.28 no.3
• /
• pp.385-413
• /
• 2019

This study examines the determinants of net export of electricity among 30 European countries sharing electricity grid during the period of 1990~2014 by separating the sample period before and after 2005 in which ETS was introduced in Europe. The empirical method used in this study is generalize least squared one considering both heterogeneous and serial correlation in the balanced panel data. According to the empirical results, after 2005 introducing the ETS, holing energy resources, concentrating only on few electricity generation resources, and nuclear electricity generation had played more important role in net export of electricity, while renewable energy had negative effect on net export of electricity and coal and gas generation have no effect on net export after introduction of ETS in Europe probably because of high environmental cost. The policy implication of the results would be that reconsidering each country's optimal generation mix strategy and its role in case freely trading electricity.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.5-5
• /
• 2019

DMZ는 살아있는 생물다양성의 보고로 지난 60여년동안 자연적으로 재생이 일어나고 환경적인 강제 보존 영향으로 높은 생태학적인 가치가 유지되고 있으며, 최근에는 남북교류에 대한 활발한 의지로 DMZ생태자원의 남북공동활용 방안에 대한 이슈가 급부상하고 있다. 이에 본 연구진은 3년전부터 DMZ에서 자생하는 식물에 대한 조사를 진행하여 총 200여종 이상의 자생식물의 표본과 추출물들을 보유하고 있으며, 이 추출물들을 활용 in vitro 와 in vivo 평가를 통해 비임상 평가에서 유효한 효과를 나타내는 후보물질들을 다수 찾아낼 수 있었다. 그 중 조팝나무(Spiraea prunifolia var. simpliciflora)는 쌍떡잎식물 장미과에 속하는 낙엽활엽관목으로 동북아시아 지역에 널리 분포되며 우리나라에서는 중부지방에 주로 서식한다고 알려져 있다. 예로부터 해열 및 소염, 신경통완화 치료등에 이용해왔다고 알려져 있으며 그 속에는 다양한 terpenoids, flavonoid 및 phenolic 화합물이 다량 함유되어 있다고 알려져 있다. 본 연구에서는 조팝나무 추출물을 이용하여 전구지방세포에서의 지방세포분화 억제 및 관련 유전자들의 활성을 확인한 후 고지방식이로 유도된 high-fat diet mouse model을 이용하여 체지방 감소 및 내장지방감소, 간 조직내의 지방량 감소등을 확인하였으며, 혈액분석을 통해 총콜레스테롤과 고중성지방등 동맥경화와 심혈관계 질환을 유도시킬수 있는 지표들에서 억제 활성도 확인하였다. 특히 내장 지방의 경우는 Micro-CT를 통해 정밀한 분석을 진행하였고, 체지방뿐만 아니라 전체 체중감소도 나타나는 것을 확인하였다. 현재 실험을 통해 적출된 간 조직과 지방조직을 이용하여 항 비만 활성의 작용기전을 지속적으로 확인하고 있으며, 이 결과는 국제적인 연구저널에 보고되어 향후 체지방 감소 또는 항 비만 치료제로 개발되는 비임상 연구자료로 활용될 계획이다. 이미 조팝나무에 대한 연구결과는 특허로 출원이 완료되어 PCT출원까지 진행중에 있으며 개별인정형 건강기능식품 개발 기업에 기술이전이 될 예정이다. 또한 원활한 원료 수급을 위해 기초단체 소속 농업기술센터와 원료 재배 및 대량 수급에 관한 논의를 마친 상태로 접경지역 근처 농가소득 증대로도 이어지는 제품화 사례이기도 하다. 이는 접경지역에서 자생하는 원료의 활성을 과학적으로 검증하여 기업과의 연계를 통해 기초시군 단체의 농가 소득과도 연계한 우수한 제품개발 사례로 향후에도 이와 같은 연구성과가 지속적으로 도출되기를 기대해본다.

• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.427-439
• /
• 2021

On the base of the aggregate extraction statistics, this study tried to analyse the demand and supply of aggregate resources of each local government and provide directions for the stable and sustainable supply and demand of aggregate resources in the future. In 2019, aggregates were produced in 148 cities, about 65% of the 229 cities of Korea, but in 7 metropolitan cities with 74 local governments, only 19 cities developed the aggregate. It means that aggregate extraction is taking place in almost all regions in Korea. Sand and gravel were produced in 110 districts and 132 districts, respectively. By aggregate source, river aggregates were extracted in 4 local governments, land aggregates in 42 local governments, forest aggregates in 75 local governments, crushed aggregates in 105 local governments, and washing aggregates in 15 local governments. In other words, 81 district in Korea have not extracted land-based aggregate at all. 71 local governments produced only one type of aggregate, and 55 local governments developed two types of aggregate, and 22 local governments developed more that three types of aggregate. In 2019, the leading producing local government were, in descending order of volume, Ulju-gun, followed by Hwaseong-si, Cheongju-si, Pocheon-si, Paju-si, Yongin-si, Gimhae-si, Gwangju-si in Gyeonggi-do. 41 local governments have developed aggregates of more than 1 million m³, and the combined production of the 41 cities accounted for about 70% of national total. This shows that the aggregate extraction trend of local governments is becoming larger and more concentrated.

• Economic and Environmental Geology
• /
• v.57 no.4
• /
• pp.431-447
• /
• 2024

This study aims to analyze the supply and demand trends and regional distribution characteristics of the stone industry through transaction records of the domestic natural stone market. The demand for natural stone is increasing globally, but domestic stone producers are facing financial difficulties due to the influx of low-cost stone, and the government is implementing various support policies, such as mandating the use of domestic stone. However, the influx of low-cost stones has led to management deterioration for domestic stone producers, prompting the government to implement various support policies such as mandating the use of domestic stones. An analysis of the natural stone transaction records from the Public Procurement Service revealed that granite was the main type of rock. The main trading items were natural stone curbs and natural stone slabs, with an average annual transaction amount of approximately 312.8 billion KRW from 2017 to 2021. A comparison of the stone distribution status between the metropolitan area and non-metropolitan areas showed that the metropolitan area had high demand, while non-metropolitan areas served as major supply sources. Cities such as Pocheon in Gyeonggi-do, Iksan in Jeollabuk-do, and Geochang in Gyeongsangnam-do play important roles as major stone suppliers. Based on these results, this study proposes fostering the stone industry tailored to regional characteristics, diversifying distribution channels, and establishing a sustainable supply chain for the sustainable development of the stone industry. Additionally, it emphasizes the need for close cooperation and support among the government, industry, and research institutions.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.3-12
• /
• 2013

It is necessary to manage risk of metals which are has rigid supply structures and expected demand expansion, considering to industry structure and resource securing capacity of each country. Countries conducted various criticality analyses and selected mainly rare metals as critical materials(or Critical metals or Critical raw materials). This study examined cases of metals risk evaluation and management which are based on technology changes and imbalance supply-demand. EU and U.S.A evaluated risk on metals needed as supply expansion of renewable energy. Japan forecasted demand of rare metals needed in Japan's growth engine industry. U.K analyzed criticality of metals, considering environmental burden occurred from mining to refining. Critical materials has features such as weak price signal, inelastic supply structure, demand volatility in technology change.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.3-14
• /
• 2019

Copper is used in many electronic components and construction parts due to its excellent electrical conductivity and heat transfer characteristics, and also used for pre-plating for double layer coating such as nickel, so that copper is an essential material in modern industry. Despite the expected increase of usage and importance on wiring, sensors and data equipment in the next generation industries, it is hard for securing stable copper supply and resource management resulting from the copper prices are fluctuating owing to the economic crisis in Europe, the low economic growth trend in China, and President Trump's commitment to public industrial facilities investment in U.S.. Since most of the domestic copper consumption is used by electrolytic copper cathode, we studied not only copper recycling technology which is being commercialized but also current research trend under the research stage. This study aims to examine the characteristics of each process and the areas where future recycling technology development is required.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2018

The rapid increase in the consumption of products that contain rare metals has highlighted the importance of recycling and recovering resources from these products when they enter the waste stream. Among various metal resources that can be recovered, this study analyzes the waste streams of cobalt and palladium to determine how their waste resource circulation can be improved at each stage of the waste stream. The findings of this study point to improvements and strategies that can be made at individual stages. First, at the discharge/import stage, the implementation of tariff quotas for specific recycled metal resources is suggested to allow the systemic categorization of waste metals as resources. At the collection/discarding stage, a major problem is the instability in the supply of scrap metals, which may be better managed by changing the bidding process for the scrap metals. At the pretreatment stage, possible areas for improvement are uncovered concerning technical areas, such as technological development and improving the efficiency of material recycling, as well as policy-wise, for instance, expanding the regulation for manufacturers to produce products that are designed to facilitate resource recovery, increasing incentive for closed recycling, and refining the guidelines and standards for recycling. At the resource recovery stage, as the waste metal recycling industry consists of businesses that vary in size, policies to promote cooperation and coexistence between large and smaller enterprises will benefit the industry in the long-run. Lastly, at the product production/export stage, a tariff on exporting waste resources that contain cobalt and palladium will help control the amount of waste metals that are shipped abroad.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.17-24
• /
• 2021

Natural aggregate regular exploitation has led to environmental and resource depletion issues; consequently, construction waste has become an important raw material in the supply of aggregate smoothly. The recycled aggregate produced in the most of recycled aggregate processing company in Korea has a high adhesion ratio of cement paste and mortar, which affects the water absorption ratio and density. Therefore, the quality of recycled aggregate needs to be improved. In this study, we improved the quality of recycled aggregate through the use of a multistage separation ball mill. This ball mill has a sieve which protects the ball mix and improves the motion. Products produced by using multistage separation ball mill were compared with various quality standard for utilization as recycle aggregate. Finally, we confirmed that the multistage separation ball mill can efficiently separate cement paste and mortar from natural aggregate and that it is suitable for the production of recycled aggregates.