• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.259-264
• /
• 1972

Oxidative changes of the Ramyon lipids were studied under three experimental storage conditions. Ramyon was 1) exposed to fluorescent light irradiation at $25^{\circ}C$, 2) incubated in the dark at $40^{\circ}C$ and 3) irradiated with ultra-violet light at $25^{\circ}C$. In the study, changes in acid value, peroxide value, carbonyl value, TBA number, fatty acid composition and iodine value were determined with the lipids extracted from the Ramyon samples in intervals for a period of 20 weeks. Acid value, peroxide value, and TBA number of the samples under fluorescent light irradiation and $40^{\circ}C$ incubation increased slightly during storage, while a sharp increase of those values were noticed with the samples of ultra-violet light irradiation. Especially, the TBA number of the Ramyon lipid under ultra-violet light irradiation markedly increased within 10 weeks and then decreased. With this change in TBA number, however, the bound form of malonaldehyde increased gradually. During the storage under $40^{\circ}C$ incubation, and ultra·violet irradiation for 10 weeks, the content of linoleic and linolenic acids decreased, while palmitic and stearic acids increased. However, only small changes were noticed in iodine value of the samples. On the other hand, oxidative rancid odor appeared at the end of 16 weeks storage under fluorescent light irradiation and $40^{\circ}C$ incubation, while it took only 4 weeks with the sample stored under ultra-violet irradiation.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.350-351
• /
• 2001

대기환경기준물질 중 하나인 오존은 자외선과 코로나 방전에 의해 대기중에서 생성되며(Heisig et al., 1997), 강력한 산화력을 지니고 있기 때문에 많은 유기화합물, 무기화합물을 산화시킨다. 특히 유기화합물의 올레핀류 뿐만 아니라 방향족핵도 실온에서 빠르게 분해시키는 특징이 있다. 이 산화분해력을 이용하여 오존은 탈색, 탈취 표백 또는 유기화합물의 구조를 결정, 화학제품의 합성 등에 이용되고 있다. (중략)

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.808-814
• /
• 2012

Photocatalytic zinc oxide powders were prepared from precursor zinc acetate and ammonia solution at elevated temperature, $80^{\circ}C$, by hydrothermal precipitation method. The effect of operating parameters, pH of ammonia solution and concentration of zinc acetate solution, on the characteristics of zinc oxide powders were experimentally examined. Zinc oxide powders prepared at the conditions of pH 11, zinc acetate concentration of 1.0 M, precipitation temperature of $80^{\circ}C$, showed smallest average particle diameter of $3{\mu}m$. SEM and XRD analysis confirmed that prepared zinc oxide has hexagonal rods structure, and Anatase type crystallinity. In addition, DRS and PL analysis showed that the zinc oxide has activity at the range of 200~400 nm of UV light. And the zinc oxide decomposed 57% of a food-color stamp Brilliant blue FCF for 3 hours under the UV radiation.

• Tribology and Lubricants
• /
• v.26 no.3
• /
• pp.167-174
• /
• 2010

An apparatus for measuring oil oxidation was developed, which is capable of being mounted to mechanical devices for detecting power of fluorescent light reflected from oil in real time as an indication of the oil oxidation. This device has an advantage over conventional fluorescence spectrometers where the thin film is required for the measurement. Clean and used oil samples (mineral and synthetic oils) were tested by the developed apparatus that calculates a fluorescence quantum yield and a light absorption coefficient of the oil based upon the signals from the two light-receiving members and evaluates the degree of oil oxidation of test oils based on the fluorescence quantum yield. Results generally show that the developed device is able to effectively evaluate oil oxidation characteristics on-site in the field.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.185-185
• /
• 2013

Cu2O 는 산화물 반도체중 자연적으로 p-type 특성을 가지고 있으며 n-type 의 ZnO 와의 p-n 접합을 형성하고 자외선 센서로서의 특성을 보여주었다. 나노구조물의 자외선 센서의 제작과 졸-겔법으로 p-type Cu2O를 형성하고 열처리과정을 통하여 안정한 Cu2O 박막제작이 가능하다는 것을 보여주었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.441-447
• /
• 2008

Volatile organic compounds (VOCs) emitted from various industrial sources commonly consist of biodegradable chemicals and recalcitrant compounds. Therefore, it is not effective to employ a single method to treat such mixtures. In this study, a novel hybrid system coupled with a ultraviolet (UV) photolysis reactor and a biofilter in a series was developed and evaluated using toluene and TCE as model VOCs. When only TCE was applied to the UV reactor, greater than 99% of TCE was degraded and the concentration of soluble byproducts from photo-oxidation reaction increased significantly. However, the toluene and TCE mixture was not effectively degraded by the UV photo-oxidation standalone process. The hybrid system showed high toluene removal efficiencies, and TCE degradation at a low toluene/TCE ratio was improved by UV pretreatment. These findings indicated that the UV photo-oxidation were effective for TCE degradation when the concentration of toluene in the mixture was relatively low. A restively high toluene content in the mixture resulted in an inhibition of TCE degradation. Thus, chemical interactions in both photo-oxidation and biodegradation need to be carefully considered to enhance overall performance of the hybrid system.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1197-1205
• /
• 2018

UV protection cosmetics belong to functional cosmetics and contain organic or inorganic UV blocking pigments. The inorganic UV blocking pigments are mainly zinc oxide and titanium dioxide. It is known that inorganic UV blocking pigment has a diameter of 60 to 100 nm and has good blocking ability of UVA and UVB. Also, it has high inactivity against sunlight including UV and is excellent in safety. In addition, it is not absorbed or accumulated on the skin like organic pigments and does not cause skin irritation or allergy. In this study, mica, a plate-shaped inorganic pigment, nanosized titanium dioxide, an UV blocking material, and hydrophobic silica were surface-treated with surfactants. And then, titanium dioxide nanoparticles and silica were physically adsorbed on the mica by non-chemical mutual attraction due to differences in charge. Thereafter, the mica complex was surface-treated with silane to prepare a hydrophobic UV blocking pigment complex. The plate-shaped UV blocking composite improves the cohesiveness of a general nanoparticle material titanium dioxide, enhances UV blocking effect due to uniform dispersion, and can greatly improve dispersion stability in cosmetic formulations by surface treatment with hydrophobic property. The surface charge of the pigment was evaluated by zeta potential. The properties of the UV blocking pigment complex were evaluated by FE-SEM, XRD, FT-IR and UV-VIS.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.29-38
• /
• 2015

Cyanide can be leached out from the cyanidation method which has been used to extract high-purity gold and silver from ores, and it becomes a variety of cyanide complexes associated with heavy metals contained in ores. Such cyanide complexes are considered as persistent and non-degradable pollutants which cause adverse effects on humans and surrounding environments. Based on binding force between heavy metals and cyanide, cyanide complexes can be categorized weak acid dissociable (WAD) and strong acid dissociable (SAD). This study comparatively evaluated the performance of photo-catalytic process with regard to forms of cyanide complexes. In particular, both effects of UV LED wavelength and surface modification of photo-catalyst on the removal efficiency of cyanide complexes were investigated in detail. The results indicate that the performance of photo-catalytic oxidation is significantly affected by the form of cyanide complexes. In addition, the effect of UV LED wavelength on the removal efficiency was quite different between free cyanide and cyanide complexes associated with heavy metals. The results support that the surface modification of photo-catalyst, such as doping can improve overall performance of photo-catalytic oxidation of cyanide complexes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.156-161
• /
• 2020

Recently, as there has been growing demand for aesthetic quality in structural materials, the development of excellent color cement concrete having good coloration properties has become a requirement. This study is designed to analyze the basic physical properties of mortar and the properties of keeping the coloration under an ultraviolet ray accelerated weathering test environment according to changes in the mixing ratio between carbon black and iron oxide used as colorants. The test results show that the use of carbon black and iron oxide reduces the initial flow by 6.3~17.2 % and the air content by 3.5~31.5 % but increases the unit volume weight by 3.4~5.5 %, compared to ordinary Portland cement (OPC). In addition, the study shows that the addition of iron oxide increases the self drying shrinkage. So, caution needs to be taken on the workability of the concrete. The brightness value L^⁎ represented by black showed the most excellent black colour when carbon black 3 % and iron oxide 5 % are added. According to UV accelerated weatherproof test, the brightness value L^⁎ was found to increase in all experiment specimens by 4.28~11.97 %, and the color change by UV was found to be higher for the case where carbon black colorant was not used. Therefore, in terms of color revelation characteristics, the case using carbon black 3 % and iron oxide 5 % was found to show the best black color.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.642-645
• /
• 2012

본 논문에서는 자외선 및 적외선 필터를 기반으로 불이 연소하면서 에너지를 빛과 열의 형태로 방출하는 산화 과정으로 여러 가지의 연소반응에 의해 표출 형태가 열, 전기, 연소가스, 복사 등으로 나타날 때, 이중 열복사로 빛이 방출되는 화염의 온도에 따라 각각 특성이 다른 파장을 활용한 적외선과 자외선(IR/UV) 필터를 활용한 불꽃영상 감지시스템 설계방안을 제안한다.