• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.251-254
• /
• 2003

자동차에 장착되어 폐차시까지 사용되는 안전벨트용 웨빙은 일정 수준이상의 인장강도를 지속적으로 유지하여 착용자를 사고로부터 보호하는 중요한 역할을 하는 섬유 제품이다. 그러나 차량에 처음 장착되었을 때의 초기 인장강도가 사용 기간 증가에 따라 점차 저하된다. 웨빙의 사용 시간 증가에 따른 인장강도 저하의 주요 원인을 구성 PET 필라멘트의 취화로 생각할 수 있다. 따라서 웨빙의 구성 소재인 PET 필라멘트가 환경 요인에 의하여 취화되는 과정을 확인하고자 온도와 UV-B 자외선 조사에 의한 가속실험을 실시하였다. (중략)

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.3
• /
• pp.25-38
• /
• 2003

Geotextile composites to improve the resistance to the application environment were manufactured of recycled polyester geotextile with carbon black as ultraviolet stabilizer and polypropylene geotextile by needle-punching method. Mechanical properties, ultraviolet resistance and chemical stability were evaluated. Retention ratio of tensile properties of polypropylene geotextiles were decreased about 50% with the exposed condition by ultraviolet but those of geotextile composites showed the slightly decrease. Geotextile composites which have larger weights of recycled polyester geotextile were more stable against ultraviolet. For chemical stability, the changes of tensile strength values of geotextile composites were in the range of -20~+10% at the various chemical conditions.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.85-91
• /
• 2004

The objective of this study is to determine the optimum conditions of operational parameters using factorial design for phenol degradation in photocatalytic oxidation reactors. Factorial design is widely used to select the dominant factors and their ranges in experiments involving several factors where it is necessary to study the effect of factors on a response. The effects of initial concentration of phenol, intensity of UV light and surface area of catalyst on phenol degradation were investigated. Two levels were considered in this study so that the experiment was a $2^3$ factorial design with three replicates. The experimental results show that an increase in initial concentration of phenol from 5 to 50 mg/L intensity of UV light from 5,000 to $20,000\;{\mu}W/cm^2$, and surface area of catalyst from 740 to $2,105\;cm^2$ enhanced the phenol degradation rate by an average of 1.86, 1.79, and 2.10 mg/L hr, respectively. Interaction effects do not appear to be as large on the phenol degradation rate as the main effects of single factors. The optimum working condition for photocatalytic oxidation reactors, despite the higher three factors the better removal rate, is the highest surface area or catalyst.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.11a
• /
• pp.175-178
• /
• 2005

본 연구는 물벼룩을 환경 중 UV-B와 유사한 강도에 노출시켜 8세대 이상 적응시킨 후 Daphnia magna의 UV-B 적응이 광독성 오염물질의 독성 민감도에 미치는 영향을 관찰하였다. UV-B에 적응된 D. magna는 UV-B와 Cu 동시 노출 시 자외선에 적응되지 않은 D. magna에 비해 높은 저항성을 보였다(p<0.1). 그 이유는 D. magna가 UV-B에 적응되는 과정에서 oxidative stress에 대한 방어/회복 능력이 증가하여 동일한 ROS를 생성하는 Cu에 노출되었을때 효과적으로 저항할 수 있었기 때문으로 해석된다. Pyrene, fluoranthene, anthracene, As, Cd, Ni은 독성이 증가하거나 동일하게 나타났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.649-655
• /
• 2010

This study investigated the degradation of phenol using sonication and/or UV-C. The effects of frequency, temperature, pH in solution, argon purging, with UV intensity were estimated in sonication-only, UV-only, and the combined reaction of sonication with UV. The optimum condition for degrading phenol in the sonication-only reaction was 35 kHz, $5^{\circ}C$, and pH 4. As this condition approximately 30% degradation of phenol was achieved within 360 min. However, phenol in the UV-only at $19.3\;mw/cm^2$ under the same condition was completely degraded within 60 min. In the combined system of sonication with UV, the degradation of phenol was well fitted to first-order rate model, and phenol was completely degraded within 360 min and 45 min at UV intensity of $7.6\;mW/cm^2$($17.3{\times}10^{-3}\;min^{-1}$) and $19.3\;mW/cm^2$($138.1{\times}10^{-3}\;min^{-1}$), respectively. Adding methanol, as a radical scavenger, in the phenol degradation in the sonication reaction indicates that OH radical is a major factor in the degradation of phenol. The order of degradation efficiencies of phenol was in the order of as follows; combined reaction of sonication with UV > UV-only > sonication-only.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.38-43
• /
• 2008

Pepper plants (Capsicum annuum, cv. Manitta) were subjected to different intensities of UV-B radiation to understand alterations of primary- and secondary-metabolism such as carbohydrates, phenolic compounds and polyamines. UV-B doses with a UV-B lamp ($1.2W\;m^{-2}$) were adjusted between 0 to 9 hr. The soluble sugars and starch contents in pepper leaves were highly influenced by UV-B treatment. The soluble sugars altered from $6.7mg\;g^{-1}\;fw$ to $5.2mg\;g^{-1}\;fw$ after 9 hrs of UV-B exposure. The starch contents after 3 hrs of UV-B exposure changed from $17.7mg\;g^{-1}\;fw$ to $12.3mg\;g^{-1}\;fw$ and then remained unchanged. The absorbance of UV-absorbing compounds reached initially maximum at all wavelengths read. On the basis of this result, we analyzed total phenolics, anthocyanin and simple free phenolic acids. Anthocyanin and free phenolic acids responded sensitively with a steady increase during UV-B treatment, although anthocyanin contents declined highly after 3 hrs of treatment. Whereas, there is no alteration of total phenolics (as gallic acid equivalent) caused by UV-B. Free polyamine levels in leaves increased rapidly and highly when UV-B was treated. The most prominent changes in polyamine induction were putrescine and spermidine (+ 70 %) after 3 hrs and spermine (+ 150 %) after 6 hrs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.105-105
• /
• 2011

국내 해양레저산업 중 세일요트산업은 현재 초기시장을 형성하고 있으나, 현재 정부의 해양레저 활성화 정책과 해양레저 인구 또한 관련 협회, 클럽 등의 중심으로 급속한 증가세를 이루고 있다. 이에 요트수요 증대에 따라 요트 관련 부품 소재의 경우에도 향후 그 수요가 대폭 증가할 것으로 예상되어지고 있으며, 그 중 요트용 돛(Sail)의 경우에는 전량 해외 수입에 의존하고 있어 제품개발을 통해 국산화함으로써 해외 제품의 수입대체가 요구되고 있다. 본 연구는 해외의 산업용 폴리에스터 원사로 제조된 요트세일 제품의 특성 및 성능 분석 결과와 국산 고강력 폴리에스터 소재로 제조된 요트 세일 개발 제품의 물성 및 성능을 비교 분석하고자 한다. 세일 제품 개발을 위해 해외 요트용 세일 제품을 분석한 결과, 소재는 고상중합형태의 폴리에스터 산업용 원사를 사용하여 직물자체의 고강도 및 저신도 특성발현을 위한 고밀도 제직을 실시한 것으로 분석 되었으며, 가공에서는 해양에서 사용하는 세일 직물의 특성 상 일광 및 자외선에 대한 내구성을 높이고, 황변을 방지할 수 있도록 하기 위해 직물표면에 멜라민계 수지를 이용한 함침방식의 특수코팅을 실시한 것으로 분석되었다. 이러한 해외 요트용 세일 제품의 분석결과를 바탕으로 국산 고강력 폴리에스터 고밀도 직물에 자외선 및 일광에 대한 내구성이 우수한 무황변 타입의 폴리에스터계 수지를 사용하여 단면 코팅으로 양면코팅 가공효과를 부여하는 나이프 방식의 특수코팅, 에이징 처리를 통해 세일을 제조하였다. 본 연구에서는 제조된 세일 직물 제품에 대해, 물리적 특성을 분석하기 위해 인장 강신도, 무게, 두께 및 주사전자현미경 관찰 등의 테스트를 실시하였으며, 세일 성능 분석을 위해 공기투과도, 일광견뢰도 자외선 조사 후 강도변화, 황변 Test 등의 테스트를 실시하여, 해외 선진 제품과 개발제품의 물성 및 성능에 대해 고찰하였다.

• Journal of Adhesion and Interface
• /
• v.18 no.4
• /
• pp.159-165
• /
• 2017

In this study, we synthesized UV-curable urethane acrylates with different contents of BA, reactive diluent and characterized their physical properties such as thermal, mechanical properties, adhesive strength and flexibility resistance. From a result of DSC, Tg of polyol and acrylate resin were separated as the BA content increased more than 40%. Also, tensile strength, elongation and adhesive strength decreased with increasing the BA content. The UV-curable urethane acrylate with 40% BA has shown good flexibility resistance compared to other resin due to poor hardness and Tm of acrylate resin.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.551-557
• /
• 2019

The purpose of this study was to investigate the changes of flavor and taste characteristics of black pepper treated with three different nonthermal sterilization methods, which are intense pulsed light (IPL), ultraviolet (UV), and cold plasma (CP). Also, the sensorial and instrumental evaluation of black pepper before and after nonthermal treatments were analyzed. As a result of color value, UV and CP treatments did not show chromacity difference (ΔE), but IPL treatment showed a significant difference of 6.58. Piperine contents of sample before nonthermal treatments was 10.7±0.53 mg/g and the piperine contents of all samples decreased after nonthermal treatments. The result of the electronic nose analysis were divided into two groups before and after nonthermal treatments, and divided into three group by principle component analysis. According to the intensity test, after nonthermal treatments, all sample had low flavor and taste, and the intensity was in the order of IPL, CP, and UV. In thirteen sensory attribute languages developed through quantitiative descriptive analysis (QDA), the intensity value of the samples were low after nonthermal treatments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.