• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.665-667
• /
• 2016

Due to the depletion of fossil fuels and the environmental problems of recent years it has been increasing every year the interest in renewable energy. Renewable energy is clean and the typical method using solar and wind power and solar power as an energy source reusable. Wind power generation system of which it is a method of using the natural wind, convert the kinetic energy of the wind into electrical energy. Traditionally, implementing a wind power system, wind tunnel tests was to configure an environment similar to a real wind tunnel experiments. However, it costs a lot of money problems hagieneun configure these wind tunnel tests. Therefore, by this paper, in consideration of the fact, the characteristics of the generator in the wind tunnel experiment to experiment with such a wind tunnel test using a bad test by configuring the motor and controls the motor generator to obtain a result similar to the wind tunnel experiment.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.79-84
• /
• 2013

For the diversity of energy supply system and the improvement in the habitants' living environments of the islands, it is possible and necessary to use the natural energy as resources of the electric power generation system. In this study, the characteristics of wind and solar radiation on 4 islands offshore Namhae-Tongyoung of Korea were measured for one year from November 2010 to October 2011 and analyzed in relation to energy resources survey. As a result of measurement and analysis, the respective wind rose diagrams of 4 islands were made, and showed that the frequencies of wind directions were quite different from among the islands. The Rayleigh probability distribution of wind velocity showed that the wind speeds of KR and SS were mainly 2~5m/s, and the respective quantities of electric power generation of 4 islands were shown to be different. The variation of solar radiations and potential quantity of those uses were measured to be similar to each other among 4 islands.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2005-2009
• /
• 2008

하천수변조사는 하천수변의 물리 화학 생물학적 특성 파악과 이들의 상호 연관성 및 변화양상을 분석하기 위한 기초자료 수집과정이다. 하천수변조사는 치수 및 이수기능뿐아니라 하천환경 기능을 보전, 재생 및 복원시키고자 하는 하천정비사업에 이용되고 있으며, 이에 따라 하천정비기본계획, 하천환경정비사업 등에서 많은 조사가 이루어지고 있다. 그러나 수집된 자료의 형태가 대부분 도면이나 이미지 형태로 관리되고 있어 향후에 수변의 변화 상태를 갱신하기가 어려운 실정이다. 본 연구에서는 행정중심복합도시 권역내의 국가하천, 지방하천, 소하천을 대상으로 하천수변조사를 실시하였으며 조사결과의 체계적 관리를 도모하기 위하여 하천수변조사지도 DB 구축과 이를 관리할 수 있는 시스템을 개발하였다. 본 연구의 성과는 단기적으로는 하천환경정비시 보전 및 복원 방향의 설정, 하천의 현재 상황을 파악하고 이를 공사 진행에 반영, 공사 과정 중에서 하천의 반응상태를 파악하여 사업진행이나 방식을 개선하는데 활용될 수 있다. 장기적으로는 행정중심복합도시 조성 전후의 하천환경 및 생태변화상을 제공할 수 있고 자연친화적인 하천환경 관리를 위한 하천환경정보를 제공할 수 있다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.71-80
• /
• 1999

Sign-language communication can be a useful way of exchanging message between people who using different languages. In this paper, we report an experimental survey on the construction of a Korean-Japanese sign-language communication system using 3D model. For real-time communication, we introduced an intelligent communication method and built the system as a client-server architecture on the Internet. A character model is stored previously in the clients and a series of animation parameters are sent instead of real image data. The input-sentence is converted into a series of parameters of Korean sign language or Japanese sign language at server. The parameters are transmitted to clients and used for generating the animation. We also employ the emotional expressions, variable frames allocation method, and a cubic spline interpolation for the purpose of enhancing the reality of animation. The proposed system is implemented with Visual $C^{++}$ and Open Inventor library on Windows platform. Experimental results show a possibility that the system could be used as a non-verbal communication means beyond the linguistic barrier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.349-359
• /
• 2009

In this paper, we propose a stereo-video transmission method for reduction of delay and maximization of 3D effect. Conventional multimedia synchronization algorithms were designed to achieve minimum delay and synchronize multiple video and audio streams, however, they could not be effective for 3D video transmission. In this paper, we proposed a synchronization algorithm by considering the minimum error of time difference between streams for 3D effect. The minimum error of time difference for 3D effect was derived based on a 3D subjective quality test. We compute display time of the delivered videos within the allowed time-difference and the video are displayed according to the display time. To evaluate the performance of the proposed algorithm, we implemented a real-time video communication system and subjective quality test has been conducted with the proposed system. We found that video quality displayed by the proposed system. We found that video quality displayed by the proposed algorithm ranks 'good' and 'excellent' in the DMOS (Differential Mean Opinion Score) scale, based on the MOS (Mean Opinion Score) test.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.889-898
• /
• 2016

Virtual Bass System (VBS) is widely used to extend the lower frequency limit of small loudspeakers, which generates harmonics of a fundamental frequency. The perceptual quality of the VBS is highly dependent on the harmonic weighting strategy. There have been several weighting methods, including exponential attenuation and timbre matching. However, it is essential to match phases between harmonics in the original signal and generate harmonics to precisely convey the weighting strategy. This paper shows the limitations of the previous harmonic weighting schemes and proposes a new harmonic weighting scheme. The proposed weighting scheme proposes phase matching between the original and generated harmonics and varies the slope of the attenuation weighting dynamically according to the missing fundamental frequency. Objective and subjective tests show that the proposed harmonic weighting scheme provides more natural and effective bass perception in a limited situation than the conventional schemes, which implies that the phase matching is essential for the high quality bass enhancement.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.4
• /
• pp.22-31
• /
• 2008

In this paper, we propose a new approach for efficient multiview stereo matching and virtual view generation, which are key technologies for 3DTV. We propose semi N-view & N-depth framework to estimate disparity maps efficiently and correctly. This framework reduces the redundancy on disparity estimation by using the information of neighboring views. The proposed method provides a user 2D/3D freeview video, and the user can select 2D/3D modes of freeview video. Experimental results show that the proposed method yields the accurate disparity maps and the synthesized novel view is satisfactory enough to provide user seamless freeview videos.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.1 no.2
• /
• pp.56-66
• /
• 1998

The primary goal of the database design is to organize a large amount of data effectively in users and systems view point. Effective design of a database is very important for processing applications efficiently. In this paper, we discuss database design for an urban geographic information system that effectively maintains the cadastral and planimetric information. We first collect and analyze the requirements for the target urban geographic information system and then perform database design for these requirements. Our database design is based on the object-oriented approach that has rich expressive power and good reusability in comparison with the traditional relational approach. Especially, we employ the OMT, one of the most widely-used object-oriented models. We expect that our result would be helpful in building large databases for urban geographic information systems practically.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.1-13
• /
• 2015

The interest in renewable energy which can reduce greenhouse gas emissions has risen in the world including Korea. In Korea, solar energy generation accounts for a major percentage of electricity production using renewable energy and the solar power plants have been increasingly installed in Korea. The problem is, however, that researches on the location selection of solar power plants are unreasonably insufficient although the photovoltaic technology of the domestic solar power plants has been evolving. Thus, advanced solar energy technology could not be fully used. What is more, the indiscriminate installation of the solar power plants seriously damages the nature environment. In this study, conditions of the power plants location are analyzed in consideration of the social, cultural, environmental, economic factors and the optimum location is selected by visualizing and weighing various factors through the analytic hierarchy process. This study shows that the problem caused by the indiscriminate installation of a solar power plant could be prevented by determining the location after considering the influence of several factors. This paper would be helpful not only for the selection of location for solar plant installation in progress, but also for taking follow-up measures on the existing solar power plants placed wrongly.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.49.1-49.1
• /
• 2011

집광채광 설비는 건축물의 조명에너지 절감 및 자연광의 실내 유입을 위해 적용 가능한 태양에너지설비로써 다른 신 재생 에너지 설비와 다르게 연간에너지생산에 대한 정량적 데이터가 아직까지 부재하다. 집광채광 설비의 설치효과를 판단하기 위해서는 집광채광 설비 설치에 따른 연간 에너지생산량 산출이 필요하며, 이를 위해서는 각 구성부분(집광부, 전송부 및 산광부)의 광전송 효율에 대한 데이터가 구축되어야 한다. 본 연구는 집광채광 설비의 효율 분석에 관한 첫 번째 단계로써 외부광속에 대한 집광부 통과 직후의 내부광속의 비율을 예측하였다. 국내에 보급된 집광채광 설비는 대부분 프리즘형과 광덕트형이며, 우선적으로 집광부 입사면의 경사각과 방위각이 다양하여 내부광속 산출방법론이 매우 복잡한 프리즘형을 분석대상으로 삼았다. 전일사량, 외부조도 및 집광부 내부조도가 측정되었으며, 외부광속으로부터 내부광속을 산출하는 공식을 유도하기 위해 천공상태에 따라 전일사량 측정치가 직산분리 되었다. Perez model과 Liu and Jordon에 의해 제시된 계산식과 입사면 및 집광부 면적을 고려하여 수평면 외부조도 측정치로부터 외부광속이 그리고 내부조도로부터 내부광속이 산출되었다. 입사면의 투과율이 동일하다는 전제 하에 천공상태에 따른 태양광 투과 비율을 도출한 결과, 담천공(Kt ${\leq}$ 0.3)에서 0.39, 부분담천공(0.3${\geq}$ 0.78)에서 1.0으로 나타났다. 도출된 투과비율을 외부광속에 적용하여 내부광속을 계산한 결과치와 측정치는 약 ${\pm}9%$ 정도의 차이를 보였다. 연간 기상데이터에 위와 같은 방법론이 적용되면 프리즘형 집광부의 연간 내부광속이 산출될 수 있다. 또한 기존 연구에서 제시된 발광효율 산출식과 일사 파장에 따른 시감도를 고려하면 매 시간별 외부조도도 산출이 가능하다. 일사량 측정치와 외부조도 측정치 사이의 상관관계를 분석한 결과 결정계수 $R^2$이 0.99인데 반해 일사량 측정치와 외부조도 계산치 사이의 상관관계 결정계수는 0.95로 측정치 보다 약간 작은 값을 갖는다. 이렇게 산출된 외부조도는 각 입사면의 면적을 반영하여 외부광속으로 변환되고, 앞서 산출된 천공상태별 투과비율이 적용됨으로써 내부광속이 도출될 수 있다. 이와 같은 집광부에 대한 연구를 바탕으로 향후 전송부와 산광부 효율을 도출하고 궁극적으로 집광채광 설비를 통해 실내에 전달되는 연간 빛에너지를 예측할 수 있을 것이다. 또한 본 연구의 방법론은 다른 형태의 집광채광 설비에도 적용이 가능할 것으로 판단되며, 국내 집광채광 설비의 연간 에너지생산량에 대한 폭 넓은 데이터 구축이 가능할 것으로 기대된다.