• Journal of ILASS-Korea
• /
• v.28 no.1
• /
• pp.10-15
• /
• 2023

Recently, various types of towels and dishcloth dryer products are being widely distributed in Korea. Evaluation methods for water absorption properties of various fabrics have been developed, and there are many studies using them. This study newly intended that whether it is possible to obtain data that can quantitatively analyze the water absorption characteristics of various fabrics, to show the correlation between the water absorption height and the amount of water (water holdup) absorbed, and to experimentally suggest the applicability to evaluate the drying capacity of towel dryer using IR camera. Through these experiments, it was confirmed that quantitative data on the water absorption height of various fabrics can be measured using an IR camera and can be clearly applied to the performance evaluation of actual products.

• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.197-206
• /
• 2012

Ambers are composed of polymer molecules which contain aromatic moieties such as benzene, naphthalene, phenanthrene and anthracene. They emit fluorescence when irradiated with ultraviolet light, which was used for confirming an amber. The fluorescence of amber, however, tends to decrease as the surface of amber is weathered with light, heat, oxygen for a long time. In this study, the reliability of confirming amber with its fluorescence by measuring the changes of fluorescence after artificial aging. Aging factors were UV light (${\lambda}$=340 nm), oxygen with heat (100%, $90^{\circ}C$) and heat ($90^{\circ}C$) and aging time was for 5, 15, 30 and 60 days, respectively. In the excitation and emission spectra of amber, the intensity decreased and the maximal wavelength was shifted to longer wavelength with artificial aging time. Especially, there was a drastic decrease in the intensity of spectra to 1.7% of initial value after 60 days aging under oxygen with heat. Only in Colombian amber there showed an increase of fluorescence intensity for a certain aging time, which could be explained by the production of aromatic ring in the presence of light and heat. Conclusively, the fluorescence can be lessened by the natural weathering with light, heat and oxygen and it is not accurate to recognize amber just with UV irradiation method.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.12-19
• /
• 2022

Cathode open-type PEMFC (Proton Exchange Membrane Fuel Cells) stacks, which are widely used in small transport-type PEMFC, have a problem with poor durability. Through the accelerated durability test of the 13-cell PEMFC stack, we tried to find the cause of the degradation of the stack and to contribute to the improvement of the durability of the cathode open stack. A hydrogen/air boundary is formed during start-up/shut-down (SU/SD) due to the structural problem of the cathode open stack in which the cathode is open to the atmosphere and it is difficult to maintain airtightness, thereby deteriorating the cathode. In this study, it was possible to evaluate the durability in a relatively short time by reducing the 54% of the initial performance by repeating SU/SD 1,800 times on the cathode open stack. After dismantling the stack, each cell was divided into two and the performance was analyzed. Overall, the anode outlet MEA, which facilitates air inflow, showed more severe electrode deterioration than the inlet MEA, confirming that the hydrogen/air boundary formation during SU/SD is the main cause of degradation.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.359-365
• /
• 2007

Freezing and thawing cycle is one of the major weathering-induced factors in the mechanical weathering of the rock mass. This natural process accelerates rock weathering process by breaking down the parent rock materials and makes soil or weathered rock formation in a rock slope surface zone. It can also cause reduction of the shear strength in slopes. It is important to calculate the deterioration depth caused by freezing-thawing for a slope stability analysis. In this study, deterioration depths of rock slope due to freezing-thawing were calculated using the 1-D heat conductivity equation. The temperature distribution analysis was also carried out using collected temperature distribution data for last five years of several major cities in Korea. The analysis was performed based on the distributed rock types in study areas. Thermal conductivities, specific heats and densities of the calculation rocks are tested in the laboratory. They are thermal properties of rocks as input parameters for calculating deterioration depths. Finally, the paper is showing the calculated deterioration depths of each rock type slopes in several major cities of Korea.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.55-57
• /
• 2011

본 논문에서는 텍스쳐 최적화 기법을 사용하는 동영상 프레임 비율 상향 변환 방법을 제안한다. 제안하는 기법은 입력 영상의 텍스쳐 특성을 분석하여 블록 매칭에 의해 예측된 움직임 벡터의 정확도를 향상시킨다. 또한 패치 단위의 영상 합성을 통해 블록 경계에서 발생하는 화질 열화 현상을 최소화한다. 실험 결과를 통하여 제안하는 기법은 자연스러운 중간 시점 영상을 생성함을 확인한다.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.129-137
• /
• 1994

This study was performed for the purpose of obtaining the fundamental data to establish the criterion of concrete deterioration and presuming steel corrosion of concrete structures under the environment of seawater. Steel embedded concrete specimens were exposed in seawater for 1year. The soluble chloride content in concrete, corrosion potential and steel corrosion were considered. The results show that soluble chloride content in concrete was decreased with lower water-cement ratio and with mineral admixtures. Half-cell potential is reduced with steel corrosion. Corrosion area ratio is correlative with half-cell potential.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.179-187
• /
• 2010

Corrosion of rebar embedded reinforced concrete is the main cause of collapse and degradation of reinforced concrete structure. Degradation occurs in reinforced concrete structures from corrosion caused by the Chloride that the damage other than the severe degradation of the structure in terms of maintenance and construction when the huge expense required and deciding terms is hard. Therefore, early detection of rebar corrosion is important for efficient maintenance and repairing and planning. Meanwhile, how to evaluate the corrosion of the non-destructive measurements have been used a lot. In particular CM-II (corrosion meter) is used to measurement the natural potential, polarization resistance and the resistivity of the concrete, but has some disadvantages. Embedded mini-sensor has been developed in order to overcome these disadvantages. So Measurement corrosion for using the mini-sensor compares with the measured results CM-II (corrosion meter), the developed mini-sensor verify the validity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.388-391
• /
• 2010

최근 세계전파통신회의(WRC)에서는 자연 재해를 예방하여 인명 안전을 보호하기위해 해양 및 우주 등 지구 환경 감시를 위한 레이더 주파수의 분배를 시행하였고, 또한 WRC-12 에서도 추가적 분배를 논의하고 있다. 이러한 추세의 일환으로 정부에서는 3.0 5.6, 9.3 GHz 등의 대역에 탐지 레이더를 설치 및 운용 중에 있으며, 일반적으로 레이더 송신 출력의 비고조파 불요 및 2차 고조파 스퓨리어스 방사가 해당하는 M/W 방송 중계망에 유입되어 전송품질을 열화 시키는 주요인 되기도 한다. 본 논문에서는 M/W 방송 중계망에 레이더 간섭이 유입되는 경우에 대해 안정된 전송품질 확보를 위한 보호비, 전송 오류, 가용율 설정 등을 산출하고 결과를 분석한다. 분석 대상으로는 탐지 레이더 신호의 비고조파 불요 방사와 2차고조파 스퓨리어스 방사가 현재 운용중인 6.2 GHz 대의 방송 중계 시스템의 수신기에 유입되는 경우로 간섭 분석을 수치계산을 통해 제시한다. 적용한 분석 방법은 상이한 주파수 대역에서 이종 서비스 간의 간섭 분석 및 주파수 조정절차에도 적용이 가능하다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.111-114
• /
• 2009

멀티미디어 동영상의 부호화 알고리즘은 기본적으로 손실 부호화(lossy coding)이기 때문에 압축된 동영상에는 불가피하게 화질의 열화가 포함된다. 압축의 정도가 심하지 않거나 압축을 하더라도 영상이 단순하고 움직임이 적은 경우에는 이러한 열화의 영향이 인간의 눈에는 보이지 않지만, 압축률이 너무 높거나 원본 영상에 포함된 움직임이 복잡하거나 공간적으로 세밀한 영역이 많은 경우에는 손실이 심하여 시각적으로 거슬리는 다양한 잡음이 발생한다. 화면 떨림(flickering)은 시간 영역에서의 대표적인 부호화 잡음으로서 프레임율(frame rate)이 너무 낮은 경우에 움직임이 자연스럽지 않고 불연속적으로 튀거나 부호화 비트율(bit rate)을 제어하기 위해서 양자화 파라미터를 변동하는 과정에서 연속되는 프레임들의 화질에 차이를 보이면서 나타나는 현상이다. 본 논문에서는 DMB 환경에서 사용되는 주기적으로 I 프레임이 삽입되는 GOP(Group of Picture) 구조에서 화면 떨림 현상의 원인을 파악하고 멀티미디어 동영상의 시공간적 특성에 따라 특징적으로 나타나는 화면 떨림 현상을 분석한다. 실험 영상으로서 시공간적으로 다양한 특성을 보이며 H.264/AVC방식으로 부호화된 10개의 동영상을 선택하였으며, 양자화 파라미터를 낮은 화질의 영상에서부터 높은 화질의 영상까지 변화시키면서 화면 떨림 현상의 존재 여부 및 정도를 살펴보았다. 실험의 결과로 화면 떨림 현상은 영상의 화질이 너무 좋거나 너무 나쁘지 않은 중간 영역에서 중요하게 고려해야 할 부호화 잡음이며, 프레임 내의 세밀함의 정도, 움직임의 정도, 객체의 크기, 카메라의 움직임 등에 영향을 받음을 알 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.443-446
• /
• 2009

In this study, a series of degradation test for structural adhesives was performed to investigate the possibility of replacement of the alternative adhesives to the conventional adhesives. Four types of the adhesives were exposed to combined environmental conditions over 1000 hours at an accelerated aging tester, which can simulate natural weather conditions such temperature, moisture and ultraviolet. Mechanical and chemical properties of the adhesives were evaluated through material testing system and FT/IR spectrometer. According to the results, the conventional adhesives can be replaced by the alternative adhesives because the alternative adhesives were more stable to environmental conditions rather than the conventional adhesives.