• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.68-70
• /
• 2019

본 논문은 8.1kW/L($132W/in^3$)의 전력밀도를 갖는 전기자동차(xEV)용 저전압 배터리 충전기(Low voltage DC-DC converter, LDC)를 위한 절연형 DC-DC컨버터의 설계 방법을 제안한다. 전체 부피 중 가장 큰 비중을 차지하는 자성체의 부피를 줄이기 위해 GaN소자를 채택하여 700kHz의 스위칭 주파수를 적용하였으며, GaN 스위치를 고주파에서 원활히 동작시키기 위한 게이트 드라이버를 직접 제작하였다. 또한 자속 상쇄 개념이 적용된 매트릭스 평면 변압기를 설계하여 적용함으로써 변압기의 부피를 크게 줄일 수 있었고, 8.1kW/L의 전력밀도를 달성하였다. 본 논문에서는 후보 토폴로지들의 비교를 통해 고 전력 밀도에 가장 적합한 토폴로지를 선정하였으며, 자속 상쇄 기법이 적용된 매트릭스 평면 변압기의 설계방법을 제안하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.459-459
• /
• 2010

대면적 마그네트론 스퍼터링 캐소드를 이용하여 고효율 스퍼터링을 실현하기 위해서는 진공 상태에서 하전입자의 손실을 최소화하여 플라즈마 내에 많은 입자를 구속하는 기술이 요구된다. 본 연구에서는 고효율 특성을 갖는 대면적 캐소드($127mm{\times}900mm$) 설계를 위해 유한요소법(Finite Element Method) 수치해석 알고리즘을 이용한 3차원 전자장(Magnetostatic) 시뮬레이션 툴을 이용하여 최적화된 캐소드를 설계하였다. 캐소드 타겟 배면에 생성되는 자기장의 3차원 특성 해석을 통해 타겟효율에 가장 큰 영향을 미치는 자속밀도의 관계를 분석하였다. 고효율 캐소드 구조 설계를 위해서는 타겟 배면에 평행한 자속밀도의 분포를 최대한 확보를 것이 매우 중요하다. 이러한 특성을 확보하기 위하여 캐소드 내부에 장착되는 자석 크기 및 특성에 따른 자속밀도 특성을 해석하였다. 개발된 마그네트론 캐소드에 Si 타겟을 장착하였다. 캐소드 특성 평가를 위해 Ar 분위기 및 $O_2$를 동시에 인가하여 Si 및 $SiO_2$ 박막을 유리기판에 코팅하였다. 코팅된 박막의 특성 평가는 결정구조와 두께에 따른 투과율 및 반사율 측정을 수행하였다. Si 박막의 경우, 갈색의 코팅막을 형성하였으며, $SiO_2$의 경우, 투명한 박막으로 증착되었고 조성분석(EDXS)에 의해 $SiO_2$로 잘 코팅되었음을 확인할 수 있었다. 그리고, $SiO_2$가 코팅된 막의 투과율은 유리기판에 비해 1% 정도 향상되었음을 확인할 수 있었다. 마그네트론 캐소드 성능은 Si 타겟의 erosion 형상 분석과 3차원 유한요소법 프로그램을 이용한 자기장 분석을 통해 비교 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4747-4752
• /
• 2013

Physical characteristics of a magneto-rheological(MR) fluid can be influenced by a magnetic field. MR fluid is a suspension of micrometer-sized magnetic particles in a base liquid such as oil. Therefore, the key issue is dispersion stability because density of micrometer-sized magnetic particles are different from that of oil. In the present study, dispersion stability and physical characteristics along chemical compositions of MR fluid are investigated. 216 kinds of MR fluids are made by using magnetic powder(#2), surfactant(#2), base oil(#2), functional additive(#3), density(#3) and viscosity(#3). From experimental results, SEM photograph, magnetic flux density, supernatant and sediment of 216 kinds of MR fluids are obtained.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.98-104
• /
• 2002

This study was investigated to fabricate the isotropic $Nd_2Fe_{14}B$/epoxy bonded magnets with high characteristics paroduced by compression molding. The magnetic characteristics of the bonded magnets were directly proportional to the density of the magnets and were enhanced by using raw $Nd_2Fe_{14}B$ magnetic powders, having the mean particle size of $200{\mu} m$.without additional milling process. The high characteristics of the bonded magnets were achieved at the following conditions: epoxy resin of 2.0 wt%, silane coupling agent of 0.8 wt%, curing agent of 0.7 wt% on the base of magnetic powders, and curing condition of $150^{\circ}C$/3 hrs. The bonded magnets at the optimum conditions indicated the high characteristics such as the density of 6.1 g/㎤, the remanent flux density of 7.1 kG, the maximum energy product of 9.7 MGOe, and the compressive strength of 17 kg/$mm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.294-295
• /
• 2005

다중 코어를 이용한 대전류 변압기용 Mn-Zn ferrite를 제조하고 전자기적 특성을 분석하였으며, 제조된 자심재료를 이용하여 변압기를 제조하고 전원장치에 탑재하여 효율특성을 분석하였다. ZnO의 몰비가 증가할수록 혼합 스피넬의 형성을 통한 보아 자자의 증가로 인해 투자율은 증가하고 상대적으로 전력손실이 감소하여 $Fe_2O_3$ : MnO : ZnO = 53 : 36 : 11 mo\% 일 때 가장 우수한 특성을 나타냈고, 열처리 공정의 승온 과정에서부터 산소 분압을 제어하고 최적의 대기압 상수를 산출함으로써 Zn-loss 현상을 최소화하여 ZnO 11 mol%, 대기압 상수 7.7일 때 투자율 2350, 밀도 4.9 $g/cm^3$, 비저항 480 ${\Omega}cm$, 300 mT의 최대 자속 밀도 특성을 갖는 우수한 자심 재료를 개발하였다. 그리고 최소 손실 온도를 $90^{\circ}C$ 이하로 감소시켰으며 100 kHz에서 250 $kW/m^3$의 낮은 전력손실을 나타냈다. 또한 개발된 자심재료를 이용하여 제조된 전원장치는 30~80A의 출력 전류에서 85% 이상의 고효율을 얻었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3455-3459
• /
• 2014

This paper reports the design and experiments for a high drive force of projectile in a coil gun system. Currently, the coil gun has been studied to apply an electromagnetic launcher. A coil gun launches a projectile by the attractive magnetic force of the electromagnetic coil. The drive force of projectile is proportional to the magnetic force generated by the electromagnetic coil. The current affects the life of the coil and the current limit exists. Therefore, the coil gun design, which does not exceed the current limit and the magnetic forces are at the maximum, is required. For this purpose, this study calculated the magnetic flux density and forces of the coil gun system and determined the current limit of the coil using the Onderdonk's equation. Based on the design result, a prototype was manufactured and an experiment was conducted to measure the muzzle velocity of the projectile. The fired projectile was analyzed using a CCD camera, and the muzzle velocity was 21m/s. In addition, a comparison of the experimental value and analysis value using commercial electromagnetic analysis software MAXWELL revealed an error of approximately 9.5%.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.29-35
• /
• 2003

Anisotropic Sr-ferrites were prepared by the spark plasma sintering process (SPS). The Ferrite particles were oriented and densified during sintering process, and the anisotropic ferrites were manufactured at low sintering temperature and a remarkable short time processing by SPS method. It was showed that the anisotropy of ferrite particles at the specimen outer side was more higher than that at the specimen center, and it seems possible that the orientation of ferrite particles was related to DC current. Magnetic and physical properties of sintered Sr-ferrites are Br = 3.15 kG, iHc : 2.67 kOe, and density : 5.033 g/cm$^3$ when the samples were sintered for 8 minutes at 106$0^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1474-1479
• /
• 2012

Rotational smart lighting control system provides artificial light to plants on planting board by rotational lighting system. As the lighting system of existing plant factory has high cost problem due to the installation for many lighting equipments, the lighting system was developed to rotate less number of lighting equipments to reduce cost. In this paper, the illuminance, luminous flux and photosynthetic photon flux density(PPFD) that plants need to grow were calculated. And the light intensity at each measured location considering the rotational speed of blade were analyzed by the simulation and the experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.22-28
• /
• 2009

Recently, there has been an active study about smart fluid to control the vibration, in which MR fluid is evaluated as most efficient because it can generate different bonding forces based on the intensity of the external magnetic fields. This paper attempts to find a mechanism that, under limited conditions during a clutch production that uses such dynamic characteristic, defects the maximum intensity of electromagnetism. Using the finite element analysis program, we predicted a change within the bonding force of the MR fluid occurring inside the clutch when it is subjected to an increased electric current. In addition, we analyzed the change in the magnetic intensity when the coil comprising the coil control center is switched to multiple lines from the standard single line, to find a mechanism that can maximize the effect. Based on this analysis, we developed the clutch and tested its function, hoping to widen future MR fluid's range of application.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.423-430
• /
• 2009

Recently as the inactive response characteristics of the existing RCD used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper confirms the unreliability of the existing RCD by electrical fault simulator and proposes a EFDPD by using semiconductor switching devices and a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the self circuit breaker in EFDPD rapidly cuts off the system. The proposed EFDPD confirms the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disasters, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.