• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.304-310
• /
• 2010

Chronic pain and herniated disk is a common disease that 80% of adults are experienced. There diseases rates of caused by the physical shock, such as the traffic accident, and the accidental fall is about 10%. And the most of these diseases is caused by having habitual incorrect position. People know that incorrect position would cause to accumulate continuous stress, but it is not easy to correct position. Because it does not recognize incorrect position repeated habitual consequently. This system collects data of user position after sensors that could measure position attach on use and presumes correct position used by position presumption algorithms. Its system purpose is continuing incorrect position could be aware to user and lead to change to correct position to prevent habituation of incorrect position. If habitual of correct position continues through accurate measurement and repeating cognitive learning, it would help for children and chronic patience.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.210-216
• /
• 2021

Musculoskeletal disorders affect workers' safety in most industries, and forest operations are classified as a musculoskeletal burden according to the Occupational Safety and Health Act in South Korea. In particular, felling and delimbing operations are mainly conducted by manpower, and then, it is necessary to evaluate ergonomic risk assessment for safety of felling and delimbing workers. Three ergonomic risk assessment methods, such as Ovako Working posture Analysis System (OWAS), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA), are available for assessing exposure to risk factors associated with timber harvesting operations. Here, three ergonomic risk assessment methods were applied to examine ergonomic risk assessments in chainsaw felling and delimbing operations. Additionally, exposure to risk factors in each method was analyzed to propose an optimal working posture in felling and delimbing operations. The risk levels of these operations were evaluated to be highest in the RULA method, followed by the OWAS and REBA methods, and most of the exposed working postures were examined with a low-risk level of two and three without requiring any immediate working posture changes. However, two significant working postures, including the bending posture of the waist and leg in felling operation and standing posture on the fallen trees in delimbing operation, were assessed as the high-risk level and needed immediate working posture changes. Low-risk work levels were examined in the squatting posture for felling operation and the straightened posture of the waist and leg for delimbing operation. Moreover, the slope in felling operation and the tree height in delimbing operation significantly affected risk level assessment of working posture. Therefore, our study supports that felling and delimbing workers must operate with low-risk working postures for safety.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.27-41
• /
• 2012

In this paper, there is analyzed the disturbances to impact on COMS attitude and the attitude error using the received telemetries in KARI ground station during normal mode of COMS. COMS was launched successfully at Kourou, French Guiana on the 26th of June, 2010. Up to now after IOT(in-orbit test), COMS is performing well the main mission to measure meteorology and ocean during about half and one year. The disturbances to impact on COMS attitude are mostly by the Sun, by the motion of payload mirror and by the spike happened during operation of earth sensor mirror and wheel. The analysis result on the other cases happened rarely during the nominal operation, is summarized.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.603-610
• /
• 2015

This paper presents a multimodal sensor system that can determine the location of house space by analyzing the postures and heights of the residents. It consists of two sensors: a tilt sensor and an altimeter sensor. The tilt sensor measures the static and dynamic postures of the residents, and the altimeter sensor measures their heights. The sensor system includes a Bluetooth transmitter, and the server receives the measured data and determines the location in the house. We describe the process determining the locations of the residents after analyzing their postures and behaviors from the measured data. We also demonstrate the usefulness of the proposed system by applying it to a real environment.

• Physical Therapy Korea
• /
• v.7 no.4
• /
• pp.1-7
• /
• 2000

이 연구의 목적은 만성요통 여성 환자들에서 나타나는 자세 이상을 평가하고 방사선적 변수들과 임상적인 변수들과의 상관성을 알아보는 것이다. 이 연구의 대상자는 만성요통 여성 환자 38명과 대조군 32명이었다. 변수의 측정은 모든 대상자들이 이완된 자세로 기립한 상태에서 방사선 검사를 실시한 후 경추전만각, 흉추후만각, 요추전만각, 그리고 요추경사각을 측정하였다. 대상자들의 연령과 통증기간은 의무기록지를 참고하였다. 자료분석은 요통군과 대조군의 방사선적 변수들 간의 유의한 차이가 있는지를 알아보기 위해 독립된 t-검정을 시행하였고, 방사선적 변수들과 임상적 변수들과의 상관성을 알아보기 위해 피어슨 상관분석을 시행하였다. 연구결과 만성요통 환자군과 대조군사이의 경추전만각(p<.05), 요추전만각(p<.001), 그리고 천추경사각(p<.01)에서 통계학적으로 유의한 차이가 보였다. 통증기간은 요추전만각과 통계적학으로 유의한 상관관계가 있었으며(p<.05), 경추전만각은 흉추후만각과 통계학적으로 유의한 상관관계가 있었다(p<.05). 또한 흉추후만각, 요추전만각, 그리고 천추경사각은 각각 상호간에 상관관계가 있었다(p<.05). 만성요통은 요추만곡의 변화를 초래하여 흉추부 및 경추부의 자세이상을 유발할 수 있다. 그러므로 요통으로 인하여 올 수 있는 신체 전반적인 자세이상을 미리 예측하고 이를 교정하여야만 장기적으로 올 수 있는 합병증들을 예방할 수 있을 것이다.

• Journal of Broadcast Engineering
• /
• v.27 no.6
• /
• pp.944-947
• /
• 2022

Due to the coronavirus pandemic, the wearing of a mask has been increasing worldwide; thus, the importance of image analysis on masked face images has become essential. Although head pose estimation can be applied to various face-related applications including driver attention, face frontalization, and gaze detection, few studies have been conducted to address the performance degradation caused by masked faces. This study proposes a new data augmentation that synthesizes the masked face, depending on the face image size and poses, which shows robust performance on BIWI benchmark dataset regardless of mask-wearing. Since the proposed scheme is not limited to the specific model, it can be utilized in various head pose estimation models.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.402-409
• /
• 2018

In this paper, we propose a lunar landing scenario of a robotic lunar landing mission and implements an optimal landing trajectory at the powered descent phase based on the proposed scenario. The change of attitude of the lunar lander in the power descent phase affects not only the amount of fuel used but also sensor operation of image based navigation. Therefore, the attitude angular velocity is included in the cost function of the optimal control problem to minimize the unnecessary attitude change when the optimal landing trajectory generates at powered descent phase of the lunar landing. The influence of the change of attitude angular velocity on the optimal landing trajectory are analyzed by adjusting the weight of the attitude angular velocity. Based on the results, we suggest the proper weight to generate the optimal landing trajectory in order to minimize the influence of the attitude angular velocity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.135-141
• /
• 2011

A smart home provides services that its inhabitant needs or wants, by integrating and simultaneously controlling various devices and sensors. In this study, we focused on a smart-home system for people with disabilities and for elderly people. We introduced a new type of system for real-time analysis of body posture of the inhabitants of a smart home. The system includes the concept that offers remote healthcare or medical services by using a 3D tilt sensor for recognizing the static and dynamic postures of inhabitants in real time. It consists of a smart-home server and a 3D tilt sensor, and it uses wireless technology to communicate with the inhabitants and thus enhance their mobility. The smart-home server includes the inference engine that differentiates the dynamic postures from the static ones. Finally, we also demonstrate the usefulness of the proposed system by applying it to a real environment.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.354-362
• /
• 2010

This paper proposes a new method for a hierarchical analysis of human gait by dividing the motion into gait direction and gait posture using the tool of dynamic Bayesian network. Based on Factorial HMM (FHMM), which is a type of DBN, we design the Gait Motion Decoder (GMD) in a circular architecture of state space, which fits nicely to human walking behavior. Most previous studies focused on human identification and were limited in certain viewing angles and forwent modeling of the walking action. But this work makes an explicit and separate modeling of pedestrian pose and posture to recognize gait direction and detect orientation change. Experimental results showed 96.5% in pose identification. The work is among the first efforts to analyze gait motions into gait pose and gait posture, and it could be applied to a broad class of human activities in a number of situations.