• Childhood Kidney Diseases
• /
• v.5 no.1
• /
• pp.43-50
• /
• 2001

Purpose : The urinary tract infection associated with vesicoureteral reflux(VUR) in children may result in serious complications such as renal scarring, hypertension, proteinuria and end stage renal disease. The purpose of this study was to evaluate the factors affecting renal scar such as age, gender, grade of VUR, and ACE gene polymorphism, and body growth in the patients with and those without renal scar associated with VUR Methods : During the period from January 1994 to July 2000, We had 93 children with urinary tract infection associated with VUR who were admitted to the Department of pediatrics of Chonbuk National University Hospital. The patients were divided into two groups according to follow up 99mTc-DMSA renal scan; patients with renal scar group and those with non-scar group. We analyzed and compared the factors associated with renal scarring between the two groups. Results : There were no significant difference in gender, causative organism, ACE gene polymorphism, height and weight at diagnosis between renal scar group and non-scar group. Fifty four patients were in renal scar group and forty seven of them had VUR. The age at diagnosis was significantly higher in renal scar group (2.48${\pm}$2.64yr) than in non renal scar group (1.26${\pm}$1.83yr). Especially, the infants who were less than 1 year of age with VUR developed relatively more renal scar compared with infants older than 1 tear of age. The incidence of renal scarring showed a direct correlation with the severity of VUR. Conclusion : The factors affecting renal scar formation were age at diagnosis, presence and grade of VUR, but the other factors such as gender, causative organism, ACE gene polymorphism were not associated with renal scarring. Therefore, further evaluation about uropathogenic E coli and foflow up study about body growth associated with severity of renal scar would be necessary. (J. Korean Soc Pediatr Nephrol 5 : 43- 50, 2001)

• Clinical and Experimental Pediatrics
• /
• v.48 no.1
• /
• pp.75-80
• /
• 2005

Purpose : Internal tibial torsion is prevalent in East Asian countries such as Korea and Japan, where sitting on the floor is common behavior. Internal tibial torsion or excessive lateral tibial torsion may cause esthetical, functional, or psychological problems and also may induce degenerative arthritis in older age. The purpose of this study is to measure the tibial torsion in children of the Jeju area. Methods : Tibial torsion was measured in 1,042 lower extremities of 521 children from one to 12 years of age. The values of transmalleolar angles were analyzed for each age group divided by 6 months. Quadratic and linear regression models were used to fit patterns of changes in mean values of transmalleolar angles. The age at seven, which provides the highest coefficient of determination for quadratic regression analysis, was used as a cut-off point to fit different statistical models. Results : The mean transmalleolar angle was $0.10{\pm}5.79^{\circ}$ in all children,$ 0.90{\pm}5.49^{\circ}$ in males, and $-0.80{\pm}5.97^{\circ}$ in females. The value was $4.25{\pm}4.04$ in 1 year of age, gradually decreased to the lowest level of $-1.98^{\circ}$ in four years and seven months of age, increased again with age until it reached $0.67{\pm}1.10^{\circ}$ at seven years of age, and stayed at that level thereafter. Conclusion : Internal tibial torsion in infancy is known to correct spontaneously in the normal developing process. But in this study, the mean transmalleolar angle in children of Jeju area annually decreased after one year of age; to the lowest angle at four years and seven months of age; increased again gradually to the age of seven; and persisted in that level, about $10^{\circ}$ less than western children, not correcting further thereafter. These findings suggest tibial torsion might be caused by lifestyle, especially sitting on feet. To prevent abnormalities of joints and gaits, early diagnosis of tibial torsion in childhood and posture correction or early treatment when needed, seems to be necessary.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.1-27
• /
• 2013

The purpose of this study was to find out the areas and their constitute elements of new apprenticeship through the expert of vocational education to improve the growth potential in the field of industry. Through the three times Delphi research process final composing areas and elements(total 6 areas and 41 sub-elements) of new apprenticeship were extracted. Followings are specific study results of 41 sub-elements for the 6 areas. In area A(Technology Skill aspect) total nine sub-elements were deducted as follows. Technology skill's field appling ability, new technology skill's acquisition, quality assurance ability, research development ability, material management using ability, problem solving ability, core technology skill understanding ability, idea's imagery expressing ability, creative design ability. In area B(Institutional aspect) total five sub-elements were deducted as follows. Flexible human material support, precise division of works, objective result assessment, institutionalization of responsibilities and liabilities between teacher and student, institutionalization of duty invention reward. In area C(Affective aspect) total eight sub-elements were deducted as follows. Manners and cooperation between teacher & student and peer, values for job, basic attitude for technology, job ethic sense, respect of other organization, active action to organization change, attitude of technology successor, service mind. In area D(Self-improvement aspect) total nine sub-elements were deducted as follows. Self evaluation and reflection, cultivate of organization understanding, career planning and developing ability, sound philosophy of life, communication ability, decision making ability, prepare of individual competence enhance system, self-control ability improvement, reaction of unexpected situation. In area E(Knowledge aspect) total four sub-elements were deducted as follows. Basic knowledge of relevant area, knowledge of new technology & preceding technology, fusion and relocation of knowledge, practical knowledge. In area F(Environmental aspect) total six sub-elements were deducted as follows. Awareness of business environment, understanding of education and practice environment, understanding of apprenticeship's business demand, connectivity of region community, adapt ability of labor market's change, awareness of society environment change.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.31-49
• /
• 2012

This research aims at showing specificity of the 'fantastic' in the movie < Les temps morts (on 1964) > directed by Ren$\acute{e}$ Laloux (1929-2004 ), all over the world recognized director. This movie has a particular style by composing four forms of expression: the real recording (movie), the recording embellishes with images by image (animation), the drawing, the photo. This film is the most strange among his all films. Even if we could catch the key meaning of the film, it offer for the audience the sentiment incertain and unclear. If we consider 'the fantastic' as a hesitation between the real and the unreal, in diverse levels, this movie offers to the spectators the fantastic feelings. In order to present the way this film shows us the fantastic, we divide the film into 15 sequences according to the criteria of the visual elements and the auditive elements. We analyze specificities of this fantastic in diverse levels. At first, the first style of the drawing of Roland Topor, does not let us escape easily from the feeling of fantasy. The four representation formats(drawing, photo, animation, movie) are integrated into one whole by auditive elements(music, narration). On the other hand, certain parts incomprehensible are not integrated into the entire. are fully integrated into the unity that does not understand that part, leaving them can. Laloux leads the audience into a reality toward the end of the film, but he leave incertain sequences at the last moment. Through which the audience is again hesitant between the real and the unreal, the fantastic is strengthened as a result of the work. Finally, the fantastic of the film could be found at three levels. First, the fantastic drawing style of Roland Topor. In the second place, the fantastic exposed through the entire composition and structure of work. Overall, these by leaving through the availability of the story incomprehensible to the audience is to provide a fantastic sentiment.

• Journal of the Korean association of regional geographers
• /
• v.17 no.3
• /
• pp.332-347
• /
• 2011

This study is to analyze on territorial education described in geography textbooks in Korea and Japan. The following is the result that shows similarities and differences of the geography textbooks when it comes to territorial education. Korea and Japan have a contrasting territorial background. However, both countries start their territorial education by learning the location and shape of their country. Japanese geography textbooks focus on what people in the world think of Japan, but in case of Korea, the geography textbooks focus on how Koreans look at the world. In short, the territorial education in Japan try to emphasize Japan from the view point of the world. The next common ground is that the two countries provide territorial models in their geography textbooks in order to increase understanding. However, the Japanese students are provided with these territory models much earlier than Korean students and these models help them visualize and solidify their concept of territory. And, the two countries both put great importance on teaching territorial sea. In Japan, they try to include EEZ(Exclusive Economic Zone) in their territory. Considering these facts, it can be concluded that Japan is enlarging their concept of national territory as maritime territory. Lastly, after learning of territory the two countries both treat on territorial problems. But Korea treats passively territorial problem as such Dokdo, but Japan treats actively their territorial problems. Like that, the contents of territorial education described in geography textbooks in Korea and Japan are similar in terms of selection, but differ in quality in terms of organization. Therefore, future territorial education in Korea will be actively and successively done through succession and sequence of geography curriculum.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.39-43
• /
• 2012

Purpose: In hospital image-guided radiation therapy in patients with bladder cancer to enhance the reproducibility of the appropriate amount, depending on the patient's condition, and image-guided injection of saline system (On-Board Imager system, OBI, VARIAN, USA) three of the Cone-Beam CT dimensional matching (3D-3D matching) to be the treatment. In this study, the treatment of patients with bladder cancer at Cone-Beam CT image obtained through the analysis of the bones based matching and matching based on the bladder to learn about the differences, the bladder's volume change injected saline solution by looking at the bladder for the treatment of patients with a more appropriate image matching is to assess how the discussion. Materials and Methods: At our hospital from January 2009 to April 2010 admitted for radiation therapy patients, 7 patients with bladder cancer using a Folly catheter of residual urine in the bladder after removing the amount determined according to individual patient enough to inject saline CT-Sim was designed after the treatment plan. After that, using OBI before treatment to confirm position with Cone-Beam CT scan was physician in charge of matching was performed in all patients. CBCT images using a total of 45 bones, bladder, based on image matching and image matching based on the difference were analyzed. In addition, changes in bladder volume of Eclipse (version 8.0, VARIAN, USA) persuaded through. Results: Bones, one based image matching based on the bladder and re-matching the X axis is the difference between the average $3{\pm}2mm$, Y axis, $1.8{\pm}1.3mm$, Z-axis travel distance is $2.3{\pm}1.7mm$ and the overall $4.8{\pm}2.0mm$, respectively. The volume of the bladder compared to the baseline showed a difference of $4.03{\pm}3.97%$. Conclusion: Anatomical location and nature of the bladder due to internal movement of the bones, even after matching with the image of the bladder occurred in different locations. In addition, the volume of saline-filled bladder showed up the difference between the 4.03 percent, but matched in both images to be included in the planned volumes were able to confirm. Thus, after injection of saline into the bladder base by providing a more accurate image matching will be able to conduct therapy.

• Sleep Medicine and Psychophysiology
• /
• v.19 no.1
• /
• pp.22-26
• /
• 2012

Objectives: The percentage of positional sleep apnea in obstructive sleep apnea (OSA) varies in different reports from 9% to 60%. If there is a positional dependency in patients with OSA, positional therapy alone could be successful in treating about 50% of all OSA cases. The aim of this report is to compare anthropomorphic and polysomnographic data between the positional sleep apnea group and non-positional sleep apnea group with OSA whose conditions were diagnosed in our sleep clinic. Methods: This is a retrospective study of anthropomorphic and polysomnographic data of patients with OSA who was performed a nocturnal polysomnography. Positional sleep apnea was defined as having a supine apnea-hypopnea index (AHI) of twice or more compared to the AHI in the non-supine position. The patients were divided in the positional sleep apnea group and the non-positional sleep apnea group. Results: In 101 patients with OSA, 81 were male, and the mean age was $49.2{\pm}11.9$ years. Seventy-six (75.2%) were diagnosed as the positional sleep apnea. Waist to hip ratio and body mass index (BMI) were significantly higher in non-positional sleep apnea group. The frequency of severe OSA was significantly higher in this group. In the positional sleep apnea group, nocturnal sleep quality was better preserved, and consequently these patients were less sleepy during daytime. AHI was significantly lower and minimal arterial oxygen saturation during sleep was significantly higher in this group. Conclusion: The percentage of positional sleep apnea in OSA was 75.2%. AHI, BMI, and waist to hip ratio were lower in the positional sleep apnea group. These patients have less severe breathing abnormalities than the non-positional sleep apnea group in polysomnography.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.120-147
• /
• 1994

This study was performed for the purpose of evaluating the stress distribution around threaded type implants, cylindrical type implants and teeth connected with rigid or non-rigid connector. The stress distribution around the surrounding bone was analyzed by three-dimensional photoelastic method. Twelve mandibular photoelastic epoxy resin models and a circular polariscope were used to record the isochromatic fringes. After the stress distribution around the implant and tooth was observed, the results were as follows ; 1. In threaded type implants, stress concentrated patterns were observed at the neck either vertical or 25 degree lateral force. 2. The stress concentrated patterns were observed at the tooth apical portion and neck portions of the implant and tooth when a threaded implant was connected with the tooth by either a rigid or non-rigid connector. More force was generated at the tooth neck portion by a rigid connector and more force at the implant neck portion by a non-rigid connector. 3. The stress concentrated patterns were observed at the apical portion of the implant and tooth when a cylindrical type ,implant was connected with the tooth either by a rigid or non-rigid connector. More force was generated at the tooth apical portion by a rigid connector and more force at the neck portion of the tooth and implant by a non-rigid connector. 4. The stress around the tooth was more equally distributed in a threaded type implant than in a cylindrical implant when the tooth was connected with either a rigid or non-rigid connector. 5. The stress around a threaded type implant was progressively more equally distributed in the following order : 1) when used a single implant, 2) a non-rigid connection with the implant and tooth, 3) a rigid connection with the implant and tooth, 4) a rigid connection with two implant fixtures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.258-266
• /
• 2015

The modern radiotherapy technique which delivers a large amount of dose to patients asks to confirm the positions of patients or tumors more accurately by using X-ray projection images of high-definition. However, a rapid increase in patient's exposure and image information for CT image acquisition may be additional burden on the patient. In this study, by introducing structural similarity (SSIM) index that can effectively extract the structural information of the image, we analyze the differences between daily acquired x-ray images of a patient to verify the accuracy of patient positioning. First, for simulating a moving target, the spherical computational phantoms changing the sizes and positions were created to acquire projected images. Differences between the images were automatically detected and analyzed by extracting their SSIM values. In addition, as a clinical test, differences between daily acquired x-ray images of a patient for 12 days were detected in the same way. As a result, we confirmed that the SSIM index was changed in the range of 0.85~1 (0.006~1 when a region of interest (ROI) was applied) as the sizes or positions of the phantom changed. The SSIM was more sensitive to the change of the phantom when the ROI was limited to the phantom itself. In the clinical test, the daily change of patient positions was 0.799~0.853 in SSIM values, those well described differences among images. Therefore, we expect that SSIM index can provide an objective and quantitative technique to verify the patient position using simple x-ray images, instead of time and cost intensive three-dimensional x-ray images.