• 한국재료학회지
• /
• 제29권6호
• /
• pp.363-370
• /
• 2019

The recent development of information and communication technologies brings new changes to automobile traffic systems. The most typical example is the advancement of dedicated short range communication(DSRC). DSRC mainly consists of an intelligent transportation system(ITS), an electronic toll collection system(ETCS) and an advanced traveler information system(ATIS). These wireless communications often cause unnecessary electromagnetic waves, and these electromagnetic waves, in turn, cause frequent system malfunction. To solve this problem, an absorber of electromagnetic waves is suggested. In this research, various materials, such as powdered metal and iron oxides, are used to test the possibility for an effective absorption of the unnecessary electromagnetic waves. The various metal powders are made into a thin sheet form by compositing through processing. The electromagnetic characteristics(complex permittivity, complex permeability) of the fabricated sheet are measured. As a result, we achieve -6.5 dB at 940 MHz(77.6 % absorption rate) with a 1.0 mm-thickness electromagnet wave absorber, and -9.5 dB at 940 MHz(88.8 % absorption rate) with a 2.0 mm-thickness absorber.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.252-257
• /
• 2019

Fabrication of soft magnetic composite powders for the $Fe_2O_3-Ca$ system by mechanical alloying(MA) has been investigated at room temperature. It is found that soft magnetic composite powders in which CaO is dispersed in ${\alpha}-Fe$ matrix are obtained by MA of $Fe_2O_3$ with Ca for 5 hours. Changes in magnetization and coercivity also reflect the details of the solidstate reduction process of hematite by pure metal of Ca during MA. The saturation magnetization of MA powders increases with increasing MA time and reaches a maximum value of 65 emu/g after 7 hours of MA. The average grain size of ${\alpha}-Fe$ in MA powders, estimated by diffraction line-width, gradually decreases with increasing MA time and reaches 52 nm after 5 hours of MA. It can also be seen that the coercivity of the 5-hour MA sample is fairly high at 190 Oe, suggesting that the grain refinement of already-produced ${\alpha}-Fe$ tends to clearly occur during MA.

• 한국분말재료학회지
• /
• 제28권5호
• /
• pp.429-434
• /
• 2021

Magnetic nanoparticles have a significant impact on the development of basic sciences and nanomedical, electronic, optical, and biotech industries. The development of magnetic structures with size homogeneity, magnetization, and particle dispersibility due to high-quality process development can broaden their utilization for separation analysis, structural color optics using surface modification, and energy/catalysts. In addition, magnetic nanoparticles simultaneously exhibit two properties: magnetic and plasmon resonance, which can be self-assembled and can improve signal sensitivity through plasmon resonance. This paper reports typical examples of the synthesis and properties of various magnetic nanoparticles, especially magnetoplasmonic nanoparticles developed in our laboratory over the past decade, and their optical, electrochemical, energy/catalytic, and bio-applications. In addition, the future value of magnetoplasmonic nanoparticles can be reevaluated by comparing them with that reported in the literature.

• 대한금속재료학회지
• /
• 제46권1호
• /
• pp.44-51
• /
• 2008

The effects of magnetic powder size on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr(wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including small magnetic flakes with the size less than $26{\mu}m$ exhibited high power loss in the GHz frequency range as compared with the sheets having large alloy flakes of $45{\sim}75{\mu}m$. Moreover, both the complex permeability and the loss factor increased with the decrease in size of the alloy flakes. The large power loss of the sheets containing small magnetic flakes was attributed to the high complex permeability, especially their imaginary part. The high complex permeability of the sheets composed of small flakes was considered to be due to the highly thin shape of the flakes inducing low eddy-current loss.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.866-872
• /
• 2009

The effects of magnetic powder thickness on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr (wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The atomized FeSiCr powders were milled by using attritor for 12, 24, and 36 h, powder thickness changed from $40{\mu}m$ to $3{\mu}m$ upon 36 h milling. The composite sheet, including thinned magnetic flakes, exhibited higher power loss in the GHz frequency range as compared with the sheets having thick flakes. Moreover, both the complex permeability and the loss factor increased with the decrease in thickness of the alloy flakes. Therefore, the enhanced power loss property of the sheets containing thin alloy flakes was attributed to the flakes of high complex permeability, especially their imaginary part. Additionally, the complex permittivity was also increased with the reduction of flake thickness, and this behavior was considered to be helpful for improvement of the electromagnetic wave absorption characteristics in the composite sheets, including thin alloy flakes.

• Composites Research
• /
• 제31권3호
• /
• pp.111-116
• /
• 2018

본 논문에서는 그래핀 표면에 무전해 도금을 통해 FeCoNi 자성 나노입자를 환원 성장시킨 후 이를 다양한 계면 활성제로 분산시켜 고분자 복합필름을 제조하였다. Pyridine 계면 활성제로 분산 시킨 후 제조한 복합필름은 가장 높은 분산성과 낮은 표면저항 값(351 Ohm/sq) 및 10 GHz 주파수에서 90% 이상의 전자파 차폐 능력을 보였다. 특히, 건조과정에서 pyridine의 증발은 내부 전도체 네트워크 형성과 분산성이 높은 필름 형성을 형성 할 수 있는 것으로 확인되었다.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.25-29
• /
• 2003

자외선과 전자파를 동시에 차단하는 선글라스렌즈를 제작하기 위하여 유리가판 위에 자성재료인 페라이트에 Ni를 여러 가지 조성비로 첨가한 니켈페라이트 박막 $Ni_xFe_{3-x}O_4$을 페라이트 도금법으로 제작하였다. 이들은 모두 스피넬 구조의 단일상임을 확인할 수 있었으며 육안으로 관찰할 때 거울면과 같은 광택을 가졌으며, 손톱으로 긁었을 때 흠집이 생기지 않는 강도를 보였다. 니켈페라이트는 400nm 부근에서부터 급격히 투과율이 떨어져 자외선을 차단하는데 효과적인 양상을 보이고 있으며 그 중에서 x = 0.09의 Ni 조성비가 자외선 차단효과가 가장 좋은 깃으로 나타났다. 이는 타사제품과 비교하여 자외선 차단효과는 크게 떨어지지 않으므로, 전자파 차단효과가 있는 $Ni_xFe_{3-x}O_4$ 페라이트를 코팅한 선글라스를 착용함으로서 유해전자파와 자외선을 동시에 차단하는 효과를 얻을 수 있을 것이다.

• Composites Research
• /
• 제35권3호
• /
• pp.175-181
• /
• 2022

무선통신기술의 발전과 함께 통신기기의 활용영역은 기하급수적으로 증가하고 있으며, 이에 따라 통신기기 성능의 저하를 막기 위한 전자파 노이즈 간섭문제 해결 및 방열문제 해결 소재에 대한 관심이 높아지고 있다. 본 연구에서는 전자파 차폐와 우수한 방열특성을 동시에 가질 수 있는 복합소재 필름을 제안하였다. 이 필름은 고분자 수지에 자성 및 방열 필러 물질이 분산된 복합소재 레이어와 전도성 그리드로 구성되어 있다. 복합소재 레이어의 조성 및 특성에 대한 제어 및 전도성 그리드 형상에 대한 설계를 통해 높은 전자파 차폐능(>40 dB), 낮은 전자파 반사능(<3 dB), 우수한 열전도도(>10 W/m·K)를 5G 통신 대역인 26.5 GHz에서 500 ㎛ 이하의 극박 필름으로 달성하는 데 성공하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.40-42
• /
• 2006

연자성 복합재료는 기존의 철판 대비 기계적, 자기적 특성 떨어지는 것이 사실 이였다. 본 연구에서는 이러한 문제점 개선을 위해서 저점도 윤활제 적용을 통한 빼기 압력 저감 방안을 도출하였다. 연자성체의 고강도화, 우수한 자기적 특성을 얻기 위해서 높은 압력의 성형이 필수적인데 높은 압력으로 성형시 빼기 압력이 높아져서 금형이 파손되는 등 문제점으로 인해 우수한 특성을 얻을 수 없었다. 본 연구에서는 이러한 문제점을 해결하기 위해서 저 점도액체 윤활제, 고점도 액체 윤활제, 고체 윤활제 3가지의 윤활제 특성을 검토 하였다. 또한 저점도 액체 윤활제 적용을 통해서 기존 대비 강도 10%, 철손 10%, 빼기 압력 30%를 저감 하였다.