• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.577-577
• /
• 2012

자성나노유체(ferrofluid)는 계면활성제로 코팅된 직경 10 nm인 자성나노입자(magnetic nanoparticle)가 바탕액체(물 또는 오일 등)에 분산하고 있는 액체이다. 최근 연구에 의하면 자성나노 유체가 변압기 절연유로 사용될 경우 열전달 및 절연 특성이 향상된다고 보고되고 있다. 또한 자성나노유체에 포함된 자성나노입자는 영구자석 및 전자석 등에 의한 외부 자기장뿐만 아니라, 두 전극 사이에 인가된 전기장에 의한 유도자기장에 영향을 받는다고 한다. 본 연구에서는 두 전극 사이 전압을 1 kV로 인가한 경우에서 광학현미경을 이용한 자성나노입자의 마이크로 채널(microchannel) 내부 이동특성 관측 및 Maxwell 방정식을 이용한 전자기장 수치해석을 수행하였다. 실험 및 해석 결과를 통하여 자성나노유체에 포함된 자성나노입자가 인가된 전기장에 의하여 발생되는 이동특성을 분석하고, 선행연구에서 보고된 절연특성 변화에 관한 상관관계에 대해 고찰하였다. 광학현미경 관측 결과로부터 전기장이 인가되지 않은 경우에 균일하게 분산되어 있는 자성나노입자는 전기장 인가에 따라 발생되는 유도자기장에 의하여 입자 간의 뭉침(agglomeration) 현상과 전극 주위로 이동하려는 성질을 확인하였다. 또한 수치해석 결과로부터 자성나노입자의 존재로 인하여 전극 사이의 전기장 강도와 자속밀도가 증가함을 확인하였으며, 자성나노입자의 이동을 유발하는 유도자기장이 전극 주위에서 큰 것을 파악할 수 있었다. 이와 같은 결과는 자성나노입자가 변압기 절연유에 첨가된 경우우 절연파괴전압이 변화되는 이유를 설명할 수 있는 근거가 된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1013-1018
• /
• 2014

Magnetic Abrasive Polishing (MAP) process is a nontraditional method for polishing the surface of workpiece by using the flexibility of tool. At present, a mixture of polishing abrasives and ferrous particles is used as the tool in the MAP process. Previously, an experiment was conducted with different sizes of polishing abrasives with an aim to improve the polishing accuracy. However, the sizes of ferrous particles are also expected to have a dominant effect on the process, warranting a study on the effect of the size of ferrous iron particles. In this study, an experiment was conducted using three different sizes of ferrous particles. Iron powder of average diameters 8, 78 and $250{\mu}m$ was used as ferrous particles. The effect of each ferrous particle size was evaluated by comparing the improvements in surface roughness. The particle size of a ferrous iron was found to play a significant role in MAP and particles of $78{\mu}m$ facilitated the best improvement in surface roughness.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1997

An electromagnetic fluidized bed was proposed for the continuous separation of magnetic particles from the fine a admixtures with nonHmagnetic particles. The effects of operating variables on the magnetic fraction in the separated p particles were examined, including superficial gas velocity, mixing fraction of magnetic particles (= 100-mixing fraction of n non-magnetic particles) in the admixture, and electric current supplied to the electwmagnet. It was found that the s separation was possible when a magnetic force formed by the electromagnets works on the magnetic particles over the hydrodynamic force caused by a gas stream for fluidizing the fine admixture.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.293-299
• /
• 2006

Magnetic nanoparticles were prepared by thermal decomposition and adsorbed with lecithin by applying ultrasonic. The size and saturation magnetization of magnetic nanoparticles were observed with different lecithin concentration, and the maximum tolerated dose (HTD) and toxicity of magnetic fluid was investigated through a biological test. The thickness of lecithin-adsorption layer increased non-linearly with increasing amounts of added lecithin, and the desirable adsorption amount was observed in the lecithin concentration of 20%(w/v). The dispersibility and magnetic properties of lecithin-adsorbed magnetic nanoparticles were most excellent when the ultrasonic exposure time was 1.5h. Also, the maximum tolerated concentration with best cell viability was $32{\mu}g/ml$ in vitro test, and lecithin-adsorbed magnetic fluids improved the biocompatibility by 1.2 times compared with bare magnetite fluids in vivo.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.316-321
• /
• 2008

Monodispersed particles of poly(styrene-co-4-vinylpyridine), poly(st-co-4vp) were prepared by soapless emulsion polymerization. Iron oxide was formed on the surface and inside of the poly(st-co-4vp) particles by thermal decompostion of iron pentacarbonyl. The obtained magnetic poly(st-co-4vp) particles was mondispersed and the average size was 250 nm. The magnetic poly(st-co-4vp) particles had 14% of iron oxide, which was identified as $Fe_3O_4$ by XRD. The magnetic poly(st-co-4vp) particles had superparamagnetism according to superconducting susceptometer (SQUID).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.455-462
• /
• 2017

The magnetic interaction between elliptic Janus magnetic particles are investigated using a direct simulation method. Each particle is a one-to-one mixture of paramagnetic and nonmagnetic materials. The fluid is assumed to be incompressible Newtonian and nonmagnetic. A uniform magnetic field is applied externally in a horizontal direction. A finite-element-based fictitious domain method is employed to solve the magnetic particulate flow in the creeping flow regime. In the magnetic problem, the magnetic field in the entire domain, including the particles and the fluid, is obtained by solving the governing equation for the magnetic potential. Then, the magnetic forces acting on the particles are calculated via a Maxwell stress tensor formulation. In a single particle problem, it is found that the orientation angle at equilibrium is affected by the aspect ratio of the particle. As for the two-particle interaction, the dynamics and the final conformation of the particles are significantly influenced by the aspect ratio, the orientation, and the spatial positions of the particles. For the given positions of the particles, the fluid flow is also influenced by the orientation of each particle. The self-assembly structure of the particles is not a fixed one, but it varies with the above-mentioned factors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.362.2-362.2
• /
• 2016

본 실험은 CW (Continuous wave) 주파수를 가진 교류 자기장을 발생시켜 자성나노입자를 가열시키는 것이 목적이다. 이를 위해 CW 주파수 및 SMPS (Switching Mode Power Supply)를 이용해 코일에서 교류 자기장을 발생시키는 평판형 자기장 발생 장치를 자체적으로 개발하였다. 이를 이용하여 인가전압을 변화시키면서 자기장 세기의 변화를 주었다. 평판형 코일 위에는 유리 등의 원형 평판 절연체를 덮고 그 절연체 표면에 웰(Well plate)를 위치시켰고 그 안에 자성나노입자가 포함된 수용액을 넣어 교류 자기장에 노출시켰다. 자기장 측정센서(Magnetic pick up coil, Gauss Meter)를 이용하여 자기장의 세기를 측정하였고, 자성나노입자의 농도, 크기 및 자기장 세기에 따른 자성나노입자의 온도상승효과를 접촉식 온도계를 이용하여 정량적으로 측정하였다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.128-134
• /
• 1999

Rheological characterization was examined for two different types of magenetic particle (rod-like $\gamma$-$Fe_{2}O_{3}$, $CrO_2$ )suspension in this study. The measured suspension viscosity (viscosity vs. concentration or shear rate) is used to obtain the dependence of viscous energy dissipation on the microstructural states of magnetic particle dispersions as well as the microstructural shape effects which are related to magnetic particle orientation. The empirical formulas from mean field theory and the Mooney equation are used to relate suspension viscosity to particle concentration. Intrinsic viscosities of these two different types of rod-like magnetic particle suspensions are found to exceed the prediction of hydrodynamic theory for dilute suspensions and support the existence of flocs containing significant amounts of immobilized suspending medium due to native attraction forces among particles in the microstructures.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.240.2-240.2
• /
• 2011

그라파이트 산화물(graphite oxide;G.O)는 그라파이트와는 다르게 물에서의 분산 능력이 뛰어나고 다양한 기판상에 단일 G.O layer를 형성할 수 있는 특성을 가지고 있으며, 유연(flexible)하고 투명(transparent)하기 때문에 다양한 전 자기 디바이스에 적용 가능하다. 특히, 최근 자성산화물 나노입자(magnetic oxide nanoparticles)에 대한 연구가 집중되고 있는데, 이러한 자성 나노입자와 G.O와의 복합체에 대한 연구는 다양한 분야로의 적용성에 대한 새로운 길을 열어주고 있다. 본 연구에서는 화학적 처리법을 적용하여 자성 나노입자(Co 나노입자)와 G.O 복합체를 제조하였다. Natural Graphite powder (N.G)에 $H_2O_4$ (98%) 및 $(NH_4)_2SO_4$를 적정 몰비로 첨가하여 반응 시킨 후 공기 중에서 열처리 공정을 수행하여 expanded graphite (E.G)를 제조 하였다. 열처리된 E.G를 $1,050^{\circ}C$ 온도에서 15~30초 및 30~60초 동안 공기 중에서 열처리 하여 expanded graphite oxide (E.G.O)를 제조하였으며, E.G.O와 $Co(acac)_3$의 화학적 반응을 통하여 Co 자성나노입자-G.O 복합체를 제조하였다. N.G, E.G, E.G.O 및 E.G.O+Co입자의 결정구조 분석을 위하여 XRD 측정을 수행하였으며, FTIR을 이용하여 각 단계에서의 반응성에 대한 연구를 수행하였다. 각 단계에서 표면 및 내부 미세구조 특성 분석을 위하여 SEM, TEM, 및 EDX 분석을 수행하였으며, E.G.O+Co 복합체의 자기적 특성 평가를 위하여VSM (vibrating sample magnetometer) 측정을 수행하였다. 이러한 연구 결과는 향후 자성나노입자와 그라핀과의 복합화를 위한 기저 기술로 활용가능하리라 판단된다.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.65-72
• /
• 2006

Recent technical advances in the biorecognition engineering and the microparticle fabrication may enable us to develop the single step purification using magnetic particle, because of its simplicity, efficacy, ease of automation, and process economics. In this study, we used commercial magnetic particles from Seradyn, Inc. (Indianapolis, USA). It was ca. 2.8 micron in diameter, consisted of polystyrene core and magnetite coating, and its surface had carboxyl groups. The model, capture protein was IgG and anti-IgG was used as the ligand molecule. We studied the different surfaces ('nude', ester-activated, and anti-IgG coated) for their biorecognition of IgG. At a high pH condition, we could reduce non-specific binding. Also anti-IgG immobilized magnetic particle could capture IgG more selectively. We attempted 'oriented immobilization' of anti-IgG, in which the polysaccharides moiety near the C-terminus was selectively oxidized and linked to the hydrazine-coated MP, to improve the efficacy of biorecognitive binding. Using this method, the IgG capturing ability was improved by ca. 2 fold. From the binary mixture of the IgG-insulin, IgG could be more selectively captured. In summary, the oriented immobilization of oxidized anti-IgG proved to be as effective as the streptavidin-biotin system and yet simpler and cost-effective. This immobilization method can find its applications in protein biochips and biotargeting.