• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2783-2786
• /
• 2005

본 논문은 레이저 비젼 센서를 이용하여 측정 대상의 3차인 위치 정보를 측정하기 위한 방법을 제안하였으며, 이를 이용한 측정 시스템을 개발하였다. 레이저센서는 물체의 평면방정식을 찾기 위해 사용되었으며, 측정된 물체의 평면의 방정식과 Camera를 이용한 물체 위치 정보와 함께 측정 대상의 3차원 정보를 얻는다. 이러한 고정밀 고속 계측을 위한 레이저 모듈 및 소프트웨어를 개발하고 전용 JIG장치에 의하여 측정하던 방식을 Robot과 Laser Vision Sensor를 이용하여 자동으로 측정하는 시스템을 구현하였다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.149-156
• /
• 2000

Sedimentation and self-weight consolidation tests in cylinder and large model tank and field measurement such as settlement and pore water pressure at each layer by wireless automatic instrumentation system were carried out to investigate the behaviour of dredged marine clay fill. The consolidation behaviour for each reclaimed layer was analyzed from these measured data and numerical analysis result using finite strain consolidation theory. It was fond from this study that the consolidation behaviour of dredged clay fill is heavily dependent on the filling process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.166-169
• /
• 2005

The best sunroof wind noise quality is mainly related to the sunroof deflector which affects both low-speed buffeting and high-speed aerodynamic noise. An automatic deflector-moving and noise-measuring apparatus is developed to obtain hundreds of measuring data which haven't been available by hand. With an additional program for fast and easy noise analysis, this device leads quickly to the better position and angle of the deflector. Now, the 'better' means the lower noise level and the robuster design solution. From these kinds of better solutions, more meaningful guidelines on the deflector design and sunroof wind noise reduction can be suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2505-2510
• /
• 2009

Semiconductor processes need measurement to confirm where there are problems in quality after progresses manufacturing process. This paper suggests equipment and automatic measure sampling method that control monitoring ratio according to change point occurrence availability of process that is not measure method by the existent simple ratio rate. This paper defines measure section as ailment section, metastable section and stability section by change point standard and create statistical model of each section and developed suitable measure rate model by section. As a result, we have accomplished maximum throughput and minimum sampling number that needs to maintain constant level of quality. Proposed method minimizes load of measure process by brings production quality sophistication and decrease of process badness and lowers measure rate in stable section making perception about problem occurrence quick heightening measure rate at change point occurrence.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.311-314
• /
• 2003

This paper describes a virtual instrument system with faulty sensor reconstruction mechanism based on personal computer. This system consists of sensor control board using 16bit RISC machine, error signal reconstruction algorithm based on principal component analysis and auto tunned GUI interface according to the attached sensors. USB module is used for fast communication between PC and sensor controller. To show the veridity of the proposed system, the proposed system was applied to the developed sun tracker with 8 solar sensors.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.57-62
• /
• 1994

In this paper, a system for measuring of treeing degradation in organic dielectric material by using image processing technics, is discussed. Traditionally, treeing is measured by visual method. It made difficulty to understanding for features and changes in the configlEation of the tree growth. Using image processing system, it is made to describe the characters of the tree growth, specially length of tree and area of treeing degradation. From this image processing and visual measurement, the similar results were made, an automatic measurement system was made for configuration of the tree growth.

• 전기의세계
• /
• v.38 no.3
• /
• pp.12-18
• /
• 1989

원자력 발전소 제어계통은 계속 최신 기술의 실증으로 인하여 상당히 많은 부분이 개선될 것으로 판단되고 있다. 현재 개선이 추진되고 있는 것들은 계측제어 분야의 첨단기술인 광통신이라든가, Multi-processor 기능을 갖고 있는 컴퓨터를 사용하여 Real-time Monitoring을 하거나 보수요원의 정기적인 점검에서 발생되는 실수를 막기위한 디지탈 자동 시험장치(Automatic Test With Digital System)등이 주로 대상이다. 이러한 개선 외에도 원자력 발전소의 부하추종 능력의 개선을 위해 원자로 계측 및 제어봉 제어장치의 개선과 최적제어라든가 적응제어 이론을 이용한 제어기설계 연구가 함께 이루어져야 한다고 사료된다. 증기발생기 수위제어에는 이미 최적제어나 적응제어 이론을 응용한 제어계통의 개선 사례도 있는 실정이다. 또한 원자력 발전소의 보수 유지 및 안전 운전을 위해서 원전로보트의 이용 연구가 필요하며 특히 운전원의 실수를 최소한으로 줄이기 위해 인공지능 기술을 도입한 발전로 제어계통의 구성 연구도 매우 바람직하다고 생각된다.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.17-26
• /
• 2010

Maintenance of the roads and bridges is a major issue for all road administrators around the world, and various initiatives are being implemented in each region for the purpose of controlling the ever increasing road maintenance cost while ensuring the safety of the vehicles driving. Efforts for such initiatives have also been made in Asia and initiatives for managing heavy-weight vehicles have recently gained momentum in Korea and Japan. We have developed a technology for unevenly installing bar-shaped sensors (piezo quartz sensors) to enable dynamic axle load measurement at a highly accurate level, and have estimated our measurement accuracy of axle load/gross weight, etc. on an actual road. The measurement accuracy of the axle load/gross weight varies significantly depending on the number of sensors installed. In our implementation, the target accuracy was set to below ${\pm}5%$ for gross weight measurement so that automatic regulation can be applied. We have achieved our target by installing 8-point measurement system. However, to have this technology widely accepted, it was necessary to reduce the system size so that it can be easily implemented. Therefore, we have estimated the relationship between the measurement accuracy and the system size (number of measurement points), and have come up with the proposal of 3-point measurement as an optimum number of measurement points, and have estimated its performance on an actual road. Additionally, we evaluated the relationship between the measurement accuracy and vehicle velocity.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.382-389
• /
• 2017

Currently, reticulocyte experimental calculation technology used in clinical laboratories are divided two types: manual and automated. Manual reticulocyte counting using a microscopy lacks accuracy due particularly to its low reproducibility, affecting the accuracy of manual reticulocyte count. Moreover, Automatic blood corpuscle analyzer flow cytometry is difficult to be used in underdeveloped countries and small scale laboratories due to relatively high cost. Therefore, this study tried to find a new method to complement these drawbacks. The aim of this study was to compare the stained reticulocytes count by spectrophotometer and also to analyze the statistics of spectrophotometer and flow cytometer. The same 8 EDTA samples were repeated 36 times to compare the agreement between spectrophotometer and flow cytometer. This study measured the specimen diluted 600 times at 700~780 nm by 10 differences. Wavelength between 710 to 730 by absorbance showed a positive correlation between standard data and test data (r=0.967, p<0.01), presenting a correlation between variables. Statistical analyses of regression for test and standard parametric data, the optimal dilution factor was 600 times. Therefore, this study tried to technical utilizes such as contributing economical for the reticulocyte absorbance apply from the auto spectrophotometer, a monitoring system for the reticulocyte relation anemia, etc. Therefore, more extensive studies, including an auto chemical analyzer application, will be needed.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.1-8
• /
• 2005

Measurement of convergence was/is carried out manually throughout the world for tunnels under construction. However, manual method has certain limitations in terms of applicability for the tunnels in operation. This paper describes state of the art of convergence monitoring systems which are available for measuring displacement of existing tunnels. These technologies are analyzed as follows: 1 The Sofo system using the fiber optic sensors has been applied to the stress measurement of the tunnel lining. It has not yet been used for the monitoring of tunnel convergence because of its cost and reliability 2. A TPMS(Tunnel Profile Monitoring System) using tilt sensors and displacement sensors is used for the convergence monitoring of highway tunnels, subway tunnels and underground ducts. 3. A BCS(Bassett Convergence System) using a pair of tilt sensors can be used for the convergence monitoring of tunnels, however the accuracy of the measurement has to be improved because it uses AC input voltage during data acquisition. The system has to be validated before it can be applied to the tunnels in operation. Convergence monitoring systems using TPMS and/or BCS are recommended to be evaluated and improved by a series or tests in tunnels under construction in order to be applied to the main measuring section and the tunnels in operation.