• Spatial Information Research
• /
• v.18 no.4
• /
• pp.13-22
• /
• 2010

For implementing TMDL(Total Maximum Daily Loading) to adopt more effective management of water pollution, water quality modeling is pre-requisite and such modeling requires the extraction of stream centerline. The institutes responsible for the water quality modeling, however, generates the stream centerline with their own criteria and this lead to low accuracy of the extracted centerline as well as different modeling results for the same watershed. Therefore, this study mainly focused on the development of extraction method of the stream centerline. For that, an automated method has been developed through the integration of the centerline extraction method using a maximum inscribed circle with GIS. The result has shown that the newly developed method could enable to represent more details of the stream topography along with enhanced accuracy compared with conventional extraction method. Furthermore, the new method can afford centerline extraction for the island areas which has been the limitation of the conventional method thereby supporting water quality modeling in a detailed level.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.642-647
• /
• 2006

Recently Ministry of National Defense is reconstructing old facilities using modular construction method for enhancing soldiers' quality of living. In the future, the use of modular construction method is expected to be increased. But in beginning stage as ROK military facilities that was built by modular was not designed and constructed efficiently, problems for pilot projects need to be analyzed by phases and construction methods should be improved. For the maximized efficiency, design should be made to minimize on-site works, factory automation in an assembly plant should be installed for the better productivity, roads that will be used for transportation should be checked, and joint and connection methods between modules in on-site assembly should be improved for a better quality.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.29-36
• /
• 2017

Recently, KTX (Korean Train Express) train stoppage accidents were mainly caused by malfunctioning equipment, aging and cracking of railway vehicles, crack breakages of brake disks, and breakages of brake disks. Breakage of brake disk can cause large-scale casualties such as high-speed collision and concern about derailment by hitting lower axle and wheel. Therefore, in this study, a brake disk with solid and ventilation type, which is the brake disk of a KTX train was modeled, and a dynamometer system was constructed to operate the disk. A Rayleigh wave was used to inspect the surface of the brake disk. An ultrasonic inspection module was developed for the brake disk by using a local immersion method due to the difficulty involved in ultrasonic inspection using an existing immersion method. In addition, the surface defects of the brake disk were evaluated using a dynamometer mock-up system and an ultrasonic inspection module of the brake disk.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.704-716
• /
• 2005

Assembling new software systems from Prepared components is an attractive alternative to traditional software development method to reduce development cost and schedule dramatically. However, if separately developed components are tested, integrated and verified with unreasonable effort and high cost, it would not be an effective way to software development. Components are not distributed in the shape of white-box source code so that should be hard to validate and test in new application environment. For solving this problem, built-in tester components are suggested to check the contract-compliance of their server components. If components have various and complex function, built-in tester should be heavy and unflexible to test in composition of components. This paper suggests enhancing automated wrapper technique which substitutes with built-in tester components and shows the usability of the wrapper by design and implementation. Component testing in this way reduces the cost and effort associated with preparation of component testing and makes the various test experiments in components assembly.

• Journal of Intelligence and Information Systems
• /
• v.5 no.2
• /
• pp.43-61
• /
• 1999

국방정보체계는 종류가 다양하고 대규모로 추진되기 때문에 소프트웨어 개발을 위한 사업관리에 어려움이 많이 따른다. 더구나, 현재 국방정보체계의 사업관리는 자동화시스템을 이용하여 체계적으로 실시하지 않고 수동으로 처리하기 때문에 많은 문제점이 야기되고 있고 현재의 소프트웨어 개발 표준인 ISO 12207을 수정 없이 그대로 대규모 실시간 국방정보체계의 소프트웨어 개발사업에 적용하는 것도 한계가 있다. 따라서 본 논문의 목적은 효율적인 국방정보체계 소프트웨어 개발 사업관리를 위해서 국방정보체계별로 적절한 개발 생명주기 모델을 선정하고, 각 단계별로 사업관리자가 수행할 태스크를 식별하는 등의 도메인 지식을 개발하여 궁극적으로 국방정보체계 사업관리용 전문가 시스템을 개발할 때 활용함과 동시에 국방정보체계 사업관리의 일환으로 최종 산출물에 대한 품질을 높일 수 있도록 체계적인 시험평가 방안에 대한 도메인 지식도 개발하여 사업관리용 전문가 시스템 구축 시에 활용하고자 하는 것이다. 이를 위해서 국방정보체계의 소프트웨어 개발 사업관리에 영향을 미치는 요소들을 식별하고 이를 이용하여 국방정보체계 소프트웨어 개발 사업관리를 위한 전문가 시스템을 구축할 수 있도록 생명주기 모델 선정을 위한 도메인 지식, 생명주기 각 단계별 세부활동을 위한 도메인 지식, 시험평가 방안선정을 위한 도메인 지식을 개발하여 제시하였다. 본 논문에서는 이러한 도메인 지식을 전문가 시스템 개발도구에서 지원되는 각종 에디터에 사용되는 형태나 IF A, THEN B 형태로 개발하지 않고 사업관리용 전문가 시스템의 지식베이스에 포함될 지식들을 식별하는 것을 중심으로 개발하였다. 즉, 본 논문에서는 국방정보체계 사업관리용 전문가 시스템 개발의 필요성과 가능성을 검증하는 용역연구과제로써 프로토타입 혹을 완벽한 사업관리용 전문가 시스템을 개발한 것이 아니며, 전문가 시스템 개발 시 가장 어렵고 중요한 지식베이스 모듈속에 포함될 도메인 지식을 개발하는 것이 이 연구의 목적이다. 이러한 연구는 궁극적으로는 이러한 도메인 지식이 국방정보체계의 사업관리를 위한 전문가 시스템의 지식베이스 모듈 구축 시 기초/기반 및 핵심 지식으로 활용될 수 있을 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.111-122
• /
• 2012

Resistivity seismic dilatometer (RSDMT) system is introduced. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance the reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program was constructed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed with SPT, CPTu, bender element test and DC resistivity survey. Through one penetration of RSDMT, various soil parameters were obtained and the reliability and repeatability of developed RSDMT system could be checked.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.743-746
• /
• 2007

Now, in a domestic country, the rebuilding and redevelopment of existing houses has been rapidly increasing with an economic growth and the improvement of living condition. The percentage of C&D waste among generating waste in domestic is more and more increasing. Accordingly, Our government or company are doing much effort to decrease the C&D waste. But now, we can not find any results about system development for estimating and managing rightly the C&D waste quantity. Now, much social cost are increasing for reason of the institutional inertia for forecasting quantity of C&D waste. Therefore, This study suggest some methods be able to estimate it of apartment easily. The methods are composed with utilization of a basic unit, a CAD drawing and a 3D object. Each module can be also used individually according to the purpose of a user.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.551-558
• /
• 2021

In this paper, we made the integrated intelligent air ventilation of the actuator module that can be remotely controlled based on IoT and sensors. we implemented a ventilation window system by configuring an algorithm design and a driving circuit to control the operation of the actuator to open and close the ventilation port based on a predetermined number of data that detects indoor gas/CO2/humidity temperature and outdoor fine dust related indoor/outdoor environment. It is difficult to store, manage, and analyze data due to the large number of sensors and conditions for the transmission data of indoor air circulation module. The remote monitoring and remote wireless control screens were constructed to automate the separation and operation conditions by extracting and managing the state. We apply MQTT to enhance big data transmission and construct the system using Rocket MQ to ensure safe transmission of operational big data against system errors.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1225-1236
• /
• 2020

Fuzzing is an automated software testing methodology that dynamically tests the security of software by inputting randomly generated input values outside of the expected range. KISA is releasing open source for standard cryptographic algorithms, and many crypto module developers are developing crypto modules using this source code. If there is a vulnerability in the open source code, the cryptographic library referring to it has a potential vulnerability, which may lead to a security accident that causes enormous losses in the future. Therefore, in this study, an appropriate security policy was established to verify the safety of block cipher source codes such as SEED, HIGHT, and ARIA, and the safety was verified using differential fuzzing. Finally, a total of 45 vulnerabilities were found in the memory bug items and error handling items, and a vulnerability improvement plan to solve them is proposed.