• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.783-787
• /
• 2007

Nowadays, vehicle becoming necessity is increasing gradually and is main cause of environmental problem. The current automobile noise measurement test method such as ISO 362 which have been used many countries contribute seriously to enforce the regulation of the noise rigidly and actively study vehicle's noise, using that method. However, the amendment of ISO 362 was completed under the international agreement due to the changes in vehicle's techniques and road conditions. In this study, the difference between the current ISO 362(or ECE R51) and new ISO 362(or new ECE R51) is estimated by the test using the practical car producing domestically because the Korean manufacturer have to be interested in new test method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1249-1254
• /
• 2004

The road traffic noise becomes aggravated due to the rapid increase of motor vehicles. It has a great effect ell the dwelling environment. We Investigated characteristics and sources of the motor vehicle noise through grasping the status of the motor vehicle noise. Traffic noise results from the collective contribution of the noise produced by individual motor vehicles. The motor vehicle noise varies enormously depending upon its type and mode of operation. This Paper is concerned with the relationship between the vehicle running speed and the noise level under accelerated and steady running.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.3
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.336-337
• /
• 2010

본 연구는 현대자동차 무향 풍동(HAWT)에서 나온 실험치를 범용 CFD software인 SC/Tetra를 활용하여 모사하였다. 이를 위해서 우선 현대자동차 무향 풍동(HAWT)의 입력 경계층을 설정하고, grid test를 통해 최적의 격자를 찾고, 이에 맞는 난류 모델을 선정하였다. 입력 경계조건 설정, 격자 선정, 난류 모델 선정을 완료 후 나온 경계조건을 활용하여 실제 모델에 적용하여 현대 자동차 무향 풍동(HAWT)에서 나온 결과와 SC/Tetra에서 나온 결과와 비교 분석 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.447-451
• /
• 2006

Automobiles become indispensable to our lives of modern days, however, their abrupt increase causes environmental problems. Relevant regulations domestically and internationally, therefore, have been discussed and reinforced for tackling those problems. The current test methods such as ISO 362 which have been adopted in many countries need to be reviewed to be effective, considering the changes in automobile techniques and road conditions. This research is aimed at providing counter-plans for the expected new measures by analyzing both the current and new test methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.160-171
• /
• 1999

The paper examines the ride performance enhancement that can be obtained by applying hydraulic semiactive vibration absorbers(SAVa) to alter the compliance characteristics of the seat/wheel suspension system. The work relies on a consistent model of the (nonlinear) hydrodynamics of the SAVA. A recently developed Lyapunov control scheme is used to provide regulation.. The performance is first examined assuming a quarter car with a seat/seat mounted mass. The paper then employs a quarter car/seat with a two mass ISO model of the seated human . The simulated results indicated that a reduction of 45% of the peak vertical acceleration is achievable with new system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.102-111
• /
• 1995

The non-periodic fluctuation of the engine torque appears to be the major source of the torsional vibration of the automotive driveline. The reduction of this torsional vibration has become a significant problem along with the requirements of higher performance. The torsional vibration of the automotive driveline can be reduced by smoothing the fluctuation by adjusting the torsional characteristics of the clutch-disc. Computer simulation of the driveline is a useful investigative tool on studying the torsional characteristics of the clutch-disc. In this paper, a dynamic model for the automotive driveline was developed, and the engine torque of the model were evaluated with experimental data. By executing a simulation using the model, it has become possible to obtain the clutch-disc torsional characteristics for reducting the torsional vibration at creeping.

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.147-152
• /
• 1995

본 글에서는 현재 유럽과 우리나라와 유사한 도로사정을 가진 일본, 홍콩 에서 행해지고 있는 타이어/도로 소음에 관한 연구 실태와 그 자료를 소개함으로써 자동차 자체의 소음뿐 아니라 환경 소음 관절에서 간과할 수 없는, 타이어/도로 소음에도 관심을 가져야 할 이유를 제시하였다. 본문에서 살펴본 각 국의 노력과는 별도로 유럽 공동체(EC)는 1991년에 타이어/도로 접촉에 의해 발생하는 소음을 제한 할 수 있는 기준이 1995년 10월 이전에 결정될 수 있다고 발표하고 있으며, 이에 따라 도로 표면과 자동차의 종류에 따른 소음 측정 방법에 대한 표준을 연구하기 위하여 ISO내에 ISO/TC 43/SC 1/WG 33라는 그룹이 1991년 설립되었다. 이와 같이 유럽에선 과거부터 행해온 실제도로 표면에 대한 연구뿐만 아니라 미래를 내다본 제도적인 측면에 까지 관심을 가지고 있음을 알 수 있다. 지금까지 언급한 바와 같이 다공성 도로 표면에 따른 초기 소음 감소량이 5dB(A) 이상이고 도로 수명이 다함에 따라 그 감소량은 0dB(A)가 된다. 그러나, 이 소음 감소량은 저소음 도로 표면에 대한 연구 동기를 제공하기에 충분한 가치가 있다고 생각된다. 이제 국내에서도 자동차 자체의 소음의 제어나 차음벽의 설치뿐 아니라 조소음 도로 표면에 대한 연구 가 병행되어야 할 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.613-617
• /
• 2004

This paper presents an experimental study on vibration characteristics of an automotive roof with viscoelastic material. The goal of the study is to extract modal parameters (natural frequency, loss factor, and mode shape) of automotive roof with unconstrained and constrained layer damping treatment. To determine the effective position of the viscoelastic patch on a roof, vibration tests have been carried out for two cases; Aluminum plate with viscoelastic patch on maximum strain energy, and aluminum plate with viscoelastic patch on nodal line. From the result of aluminum plate, it is found that the viscoelastic patch should be attached on the Place with maximum strain energy Part. For the automotive root five Patches of unconstrained or constrained viscoelastic material have been attached on the position of maximum strain energy. This paper addresses that the proper position of viscoelastic patch is very important and the concept of maximum strain energy may be a good criterion f3r the placement of viscoelastic patch.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.264-272
• /
• 1994

동력을 발생하거나 이를 이용하는 대부분의 기계장치는 회전하는 축계 장치 를 갖고 있는데 이들은 중량을 갖는 회전체와 이것을 지지하거나 연결하는 강성축과 베어링으로 구성되므로 진동형태에 따른 고유진동수를 나타낸다. 그 결과 축계 장치 가 운전되는 동안 발생하는 기진력이 축계 강도를 초과하거나 진동수가 시스템의 공진점에 일치하던지 가까우면 이들 진동에 의해 축계 장치에 부착되어 있는 카프링, 감속기어, 지지베어링, 밀봉씰, 공정볼트 등이 이상마모 또는 피로파괴의 원인이 되므로 설계시나 운전중에 이에 대한 진동원인들을 PC를 이용하여 현장운전자들이 쉽게 규명할 수 있도록 개발하고 발생되는 진동문제를 효과적으로 해결할 수 있는 진동 저감장치를 몇 가지 소걔하였다. 국내에서 제작되는 선박, 자동차, 발전프랜트 또는 여기에 설치되는 엔진의 진동저감울 위해 이들 소프트웨어와 하드웨어들은 국내 관련기업의 현장기술 지도를 위해 여러차례 활용된 바 있으며 이를 이용하므로 써 축계진동 저감기술 자립은 물론 국산화 제품의 성능향상에도 크게 기여할 수 있다고 본다.