• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.96.1-96.1
• /
• 2010

전기차량용 차량제어기는 차량 전체의 구동 전략과 브레이크 시의 회생제동, 고전압 배터리의 SOC management 등을 제어하는 역할을 한다. 엑셀 페달 및 브레이크 페달의 신호를 입력 받아 운전자의 주행의지를 받아 들이고, 차량의 각종 제어기들과 CAN 통신을 통하여 필요한 정보들을 송수신한다. 이러한 입/출력 동작을 통하여 차량 전체의 구동전략을 세우고 각종 제어기들에게 주행에 필요한 정보를 전달한다. MCU(Main Control Unit)로는 32bit micro-controller 이 적용되었으며, 열충격과 고온동작 내구 등의 환경시험 및 전자기파 적합성 시험등을 통해 외부환경 변화에도 요구 성능을 만족함을 확인하였다. 이러한 성공적인 개발을 통해 2011년 초 시범양산되는 현대기아자동차의 BLUE ON 에 양산적용될 예정이라는 데에 의의가 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.161-171
• /
• 2023

It is largely agreed that elderly drivers (over 64 years) are more likely to cause fatal crashes than other age groups. According to national road crash statistics 2021, the number of road fatalities per 10,000 drivers over 64 years old was 1.77, while that of drivers in their 30s was 0.55. This indicates a 2.67 times higher probability of causing crashes among the former than the latter. The current study estimates how rear-end crashes may be reduced by installing Automatic Emergency Braking Systems (AEBS), particularly for elderly drivers. We analyzed data from Samsung Fire & Marine Insurance. The results show that the Odds Ratio of rear-end crash occurrence between vehicles with AEBS and without AEBS is 0.75, implying there were lesser rear-end crashes in the vehicles installed with AEBS. The Odds Ratio of male drivers was determined to be 0.78, which was lesser than the 0.81 Odds Ratio obtained for female drivers. Elderly drivers who had installed AEBS in their vehicles showed an Odds Ratio of 0.76, implying crash reduction. In particular, the Odds Ratio of male elderly drivers was found to be the lowest at 0.49. We believe incentivizing by giving discounted insurance premiums to the elderly who drive vehicles installed with AEBS will help reduce rear-end crashes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.31-42
• /
• 2019

Among the driving information recorded in the event data recorder (EDR), the speed information of the vehicle before the traffic accident is a very important factor that determines the punishment of the driver of the accident vehicle, the identification of the offender and the victim, and the possibility of avoiding the accident. Also, by analyzing the EDR data, the deceleration of the accident vehicle can be analyzed. In this study, the results of the braking test of the previous study and the analysis of the EDR data of the traffic accident vehicle were compared to suggest an appropriate deceleration value applicable to the calculation of the stopping distance. As a result of the braking test of the vehicle equipped with ABS of the previous study, the average deceleration of the vehicle was 0.79g ~ 0.94g. In addition, the deceleration value was calculated from 0.92g to 0.94g in the recent automobile safety evaluation braking test conducted by the Korea Automobile Testing & Research Institute. In addition, the deceleration value of 0.55g ~ 0.71g was calculated through the analysis of EDR data performed in this study, and the value was smaller than the deceleration value measured in the braking experiment of the previous study.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.126-134
• /
• 1998

본 연구에서는 회전운동을 제어하기 위한 새로운 작동기로서 전기장에 대하여 매우 빠른 응답특성을 갖고 있는 두 쌍의 실린더형 ER(electro-rheological) 클러치/브레이크 작동기를 제안하였다. 자체조성 된 ER유체의 빙햄특성 모델을 실험적으로 도출하였으며, 이와 연계한 작동기 모델을 구성하여 전기장에 따른 전달 및 제동 토크를 해석한 후 알맞은 크기의 클러치/브레이크 작동기를 제작하였다. 제작된 작동기의 동적특성(시상수 등)을 작동기 모델에 고려하기 위하여 계단입력 전기장에 따른 과도응답 실험을 클러치와 브레이크 모드에서 각각 수행하였다. 제안된 작동기의 응용성을 보이기 위하여 두쌍의 작동기로 구동되는 실험실 차원의 소형 와권식 세탁기 시스템을 구성한 후 동적지배방정식을 유도하다. 각 작동기와 연계된 PID제어기를 설계하여 세탁과 탈수시의 회전운동을 제어하였으며, 부하질량의 변화에 대한 작동기 시스템의 제어 효율성과 장시간 운전을 통한 제어 내구성 실험을 수행하였다.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.65-74
• /
• 2012

Recently, the need of developing eco-friendly materials has been required with restriction strengthening on environment and energy saving by the resource depletion worldwide. These trends are not an exception in transport industry including automobile. In addition, these materials have to fulfill not only the high quality and cheap price but also the high-performance which meet the needs of costumer and society. Among the various materials, carbon fiber-reinforced composite which is actively studying for lightweight of the automobile is one of the most suitable candidates. Indeed, the carbon fiber-reinforced composites are used as the essential materials to substitute body and other parts in automobile and the demand is increasing largely. Carbon fiber-applied automobile has improved brake, steering, durability and high fuel efficiency, leading to the energy conservation and minimizing carbon dioxide emissions. This paper focuses on the necessity of carbon fiber-reinforced composites for lightweight of automobile and its technical trends.

• Composites Research
• /
• v.28 no.3
• /
• pp.124-129
• /
• 2015

CNT and GNP have several excellent mechanical properties including, high strength, Young's modulus, thermal conductivity, corrosion resistance, electronic shielding and so on. In this study, CF/CNT, GNP/epoxy composites were manufactured by varying the CNT weight ratio at 2wt% and 3wt%, GNP weight ratio at 0.5wt% and 1 wt%. The composites were manufactured by mechanical method (3-roll-mill). Tensile, impact and wear tests were performed according to ASTM standards D638, D256 and D3181 respectively. The results showed that, CF/GNP0.5 wt%/epoxy composites gave good mechanical property in all composites, e.g., tensile strength, impact and were resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.507-513
• /
• 2021

This study examined the final stop position and posture of both vehicles, the damaged part of the vehicle, the road surface, the specifications of the vehicle, and the angle of impact, centering on the case of a collision in which no surface trace was found. As a result of the simulation, the impact velocity of an SM5 and Lexus was 131 km/h and 74 km/h, respectively, and the impact angle of the SM5 and Lexus was 0.91° and -161.07°, respectively. The cause of the accident was that the SM5 passed through the intersection exceeding the maximum speed limit of 61 km/h and entered the Lexus' left turn lane. Lexus collided during the evacuation to avoid the collision. The collision trajectory error rate of the simulation was approximately 1.4%. Of the subjective experience of accident investigators, the collision dynamics and vehicle engineering aspects and simulations were actively utilized to provide close-to-fact cause identification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.301-303
• /
• 2015

디지털 운행기록장치는 대한민국의 경우 2011년부터 상용차에 대해 법령으로 장착이 의무화되었다. 이 장치는 자동차의 속도, 주행거리, 브레이크 상태, GPS 위지청보 등을 수집하는 기록 장치로서 이를 통해 수집된 정보로 운전 형태를 파악하고 분석해준다. 그러나 초기 장치 구입비용과 전송 방식에 따른 월별 통신서비스 비용 때문에 일반 운전자의 사용이 제한된다. 따라서 본 연구는 일반 운전자도 위험운전행동을 분석하고 파악하여, 결과를 제공하는 스마트폰 어플리케이션의 설계 및 구현을 목적으로 한다. ECU(Electronic Control Unit)에서 얻을 수 있는 주행 데이터(가속 제동, 속도, 운전 시간 등)를 OBD-II(On-Board Diagnostic version II) Scanner를 통해 수집한다. 이 정보를 바탕으로 위험운전평가 알고리즘을 이용하여 실시간 분석한다. 상기 알고리즘은 대한민국의 교통안전공단에서 제공하는 위험운전(11종)에 대한 정의를 바탕으로 한다. 이를 통해 분석된 결과는 실시간으로 사용자에게 제공되며, SQLite를 이용하여 DB에 저장되고 통신사의 이동통신(3G,4G) 혹은 Wifi의 네트워크를 이용하여 연계 서버에 전송된다. 이 위험 운전 분석 어플리케이션을 통해 운전자들의 안전 운전을 유도하고자하며, 추후 운전습관 연계 보험의 도입에 따라 합리적이고 공정한 데이터를 제공하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.287-292
• /
• 2019

This paper analyzes the thermal behaviors of genuine discs used in automobiles and discs coming out of tuning products through FEM analysis. Modeling with genuine disk modeling and tuning disks Model-1, Model-2, Model-3 and analyzing the disk rotation speed was set to 1000rpm. When the brake is operated, the thermal behavior of the disk surface, such as the operating temperature caused by the disk and pad contact, the friction surface temperature after the disk stop, and the thermal deformation, were analyzed. When the brake was activated (0-4.5 seconds), the tuning disk showed 34℃ higher than the original disk, and after the disk stopped (40.5 seconds), the tuning disk was analyzed 18℃ lowe, deformation due to the disk heat was deformed by 0.3mm for the tuning disk. Although there is an effect to reduce the fading phenomenon due to the thermal behavior of the pure disk and the tuning disk, it can be observed that there is no significant change in the thermal behavior due to the hole processing and the disk surface processing of the tuning disk.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.240-257
• /
• 2022

Autonomous vehicles use various local sensors such as camera, radar, and lidar to perceive the surrounding environment. However, it is difficult to predict the movement of vulnerable road users using only local sensors that are subject to limits in cognitive range. This is true especially when these users are blocked from view by obstacles. Hence, this paper developed an algorithm for collision avoidance with VRU using V2X information. The main purpose of this collision avoidance system is to overcome the limitations of the local sensors. The algorithm first evaluates the risk of collision, based on the current driving condition and the V2X information of the VRU. Subsequently, the algorithm takes one of four evasive actions; steering, braking, steering after braking, and braking after steering. A simulation was performed under various conditions. The results of the simulation confirmed that the algorithm could significantly improve the performance of the collision avoidance system while securing vehicle stability during evasive maneuvers.