• Ceramist
• /
• 제19권1호
• /
• pp.62-67
• /
• 2016

지금까지 고용량 MLCC를 제조하기 위한 목적으로, MLCC용 유전체 재료의 기술 개발 동향을 재료적인 관점에서, 주로 BT 미립화에 따른 장점에 대해서 논하였다. 지금까지는 set 업체의 경박단소화, 다기능화 추세에 맞추어서 제품 개발이 이루어져 왔고, 이러한 제품을 완성시키기 위해서 재료 측면에서는 미립화가 지속적으로 이루어져 왔고, 미립화에 따른 유전율 감소 등의 부효과를 상쇄시키기 위한 미세구조 제어, 표면 개질 등의 기술개발도 동반하여 이루어져 왔다. 최근에는 이러한 추세가 전장 부품쪽에도 옮겨져서, 자동차에 채용되는 부품수 증가에 따른 소형화 needs가 지속적으로 커지고 있는 상황이다. 차량용 엔포테인먼트 시스템, 무인 주행 차량 등의 기술 상용화 시점이 얼마 남지 않은 시점에서 재료단에서 일반 IT 기기 대비, 신뢰성 특성이 강화되어야 하는 점을 고려해 보았을 때, 재료 개발의 중요성은 아무리 강조해도 지나치지 않을 것이다.

• Journal of Advanced Navigation Technology
• /
• 제12권6호
• /
• pp.653-658
• /
• 2008

The automotive environment is particularly demanding on connector performance, and is characterized by large temperature changes, high humidity and corrosive atmospheres. Fretting is a contact damage process that occurs between two contact surfaces. Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects arc suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.481-484
• /
• 2011

Recent Automotive technology is driven from mechanical device to the electronic components which improve the vehicle's safety and convenience. The future competitiveness of the car will come from safety issues and energy efficiency, convenience and the application of the technologies. In this study, various techniques for driver drowsiness detection are introduced and compared with each others. The advantages and disadvantages of commercially available technologies and developed technologies are compared. To enhance the detection resolution, multiple sensing technologies are introduced in this paper. The feasibility of two drowsiness detection methods, that is, existing camera image recognition method and bio signal analysis method, are tested. The direct drowsiness detection by the camera image of eyes and driver's vital signs detected indirectly are combined and analyzed by the developed noble algorithm for stress, fatigue, drowsiness detection with a more accurate high-drowsiness detection.

• Journal of the Korea Convergence Society
• /
• 제3권4호
• /
• pp.29-34
• /
• 2012

Power window motor assembly including ECU system is important to doors of automobile. This study is done for own development instead of importing of power window motor assembly. This paper is written under five specific subjects. The first, making of prototype sample and analysis of mass-production problem using CAE, the second, design of mass-production mold(2D and 3D), the third, manufacturing of sample mold, the fourth, tryout and measuring of 3 dimensions, the fifth, data analysis and mold modify. In the among them, product sample and analysis of mass-production using CAE, design and manufacture of mass-production mold, and production of sample mold are successfully done. In the results, it is made clear that two cavity and one gate are proper to make a mold of power window motor assembly housing. Besides, it is acquired own technology for mass-production of power window motor.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.97-98
• /
• 2015

자동차 업계는 전장화 가속화와 강화된 환경규제에 대응하기 위해 자동차의 12[V] 전기시스템과 더불어 48[V] 전기 시스템에 대한 도입을 추진하고 있다. 듀얼 전기시스템을 사용할 경우 소모 전력이 적은 부품에 대해서는 기존의 12[V] 시스템을 유지하고 전력 소모가 큰 전동식 조향장치, 브레이크, 공조 시스템은 48[V] 시스템을 사용함으로써 비용을 최소화하고 연비를 최대 15[%]까지 개선시킬 수 있는 특징을 갖고 있다. 이를 구현하기 위해서는 양방향 DC/DC 컨버터가 필수적이며 대성전기에서는 48V 마일드 하이브리드 시스템을 위한 4-phase 구조의 양방향 DC/DC 컨버터를 개발하였다.

• Journal of the Korean Electrochemical Society
• /
• 제25권3호
• /
• pp.119-124
• /
• 2022

Because high power with large size cell is used for the battery pack of hybrid electric vehicles and electric vehicles (HEV and EV), average temperature in a battery cell is the important criteria of the thermal management of the battery pack. Furthermore, fast charging technology is required to reduce battery charging time. Since battery pack performance and lifespan are deteriorated due to the heat of cells and electronic components caused by fast charging, an effective cooling system is required to reduce performance deterioration. In this study, a cooling system and module design applied to a pouch-type for fast charging battery cell are investigated, and the cooling performance that can maximize the efficiency of the battery was analyzed. The result shows that the vapor chamber cooling system has better cooling performance, the temperature drop in the module was 5.82 ℃ compared with aluminum cooling plates.

• Review of KIISC
• /
• 제24권2호
• /
• pp.50-55
• /
• 2014

자동차 전장제품 활용의 급속한 증가에 대응하기 위하여 자동차 분야에서는 ISO 26262 안전설계절차를 도입하여 차량용 임베디드 시스템의 안전성을 확보하려고 노력하고 있다. ISO 26262는 자동차에서 발생 가능한 비정상상태(abnormal state)를 식별하고 그의 영향을 분석하며 전체 시스템의 안전을 검증하는 것을 목표로 하고 있다. 다양한 종류의 부품이 연동되는 복잡한 시스템의 안전 검증은 결함수목법과 고장모드영향분석법을 활용하는 위험분석법이 보편적으로 사용된다. 결함주입시험은 이러한 위험분석의 기반도구로서 안전성을 향상시키기 위하여 사용된 고장감내 기능의 동작여부 및 그에 따른 시스템의 안전성을 검증하는 목적으로 사용된다. 본 논문에서는 차량용 고신뢰성 임베디드 시스템에서 사용되는 고장감내 메카니즘들의 기능과 안전을 검증하는 방법과 사례를 소개한다. 최근의 복잡한 차량용 임베디드 시스템의 개발은 상위수준의 모델을 개발하여 지정된 위험 및 고장을 초래하는 결함을 시스템에 주입하고 그의 결과를 분석하여 안전을 검증하는 것이 일반적인 방법이다. 개발 목표 차량의 임베디드 시스템 모델을 개발하고, 식별된 결함의 결함모델을 준비한 뒤, 시스템 모델 기반 결함주입 도구를 이용하여 결함주입을 수행하는 시험방법과 그 결과에 대하여 논의한다. 하드웨어는 SystemC 하드웨어 설계언어를 이용하여 개발하고, 소프트웨어를 컴파일하여 실행화일을 확보하여 시험대상인 결함모델을 개발하고 이를 대상으로 결함주입시험에 대해 설명한다.

• Journal of Korean Society for Quality Management
• /
• 제28권4호
• /
• pp.16-28
• /
• 2000

Recently days, High Accelerated Life Test of electrical and electronic parts is increasing its importance. This study set the hypothesis to develop the method that was analysis and application of HALT for the automotive electrical and electronic parts, it used Arrhenius's Model and Eyring's Model, and ESS theory. Validity of application is proved by other test data. Especially, this study emphasis on utility of acceleration to temperature, humidity, voltage, mechanical stress and other stress. In this study set the pattem of practical application. Therefore, this study emphasis on the application of the HALT and the use of other parameter by acceleration reliability test data. The result of this study is as follows. 1) There is relationship between molar weight and material constant. 2) Characteristic of material is operating acceleration factor as well as parts failure factors. Of course, according to the characteristic of material, activation energy is often more important than molar weight. But it will be defined by more testing and improvements in practical application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권2호
• /
• pp.450-455
• /
• 2017

A shield connector is an automotive electrical component that is used to connect electrical wiring in a vehicle. This part is made by progressive pressing using a phosphor bronze material with high electrical conductivity. The shape of the product is not complicated, but plastic forming techniques are required, such as deep drawing and bending, as well as shearing techniques such as piercing and notching. The finite element method was used to model the process. The strip layout design stage of the progressive die makes it possible to examine the thickness change, the stability of the forming process, and the spring-back. As a result of this analysis, it is possible to predict the correction values for the tendency of cracks, wrinkles, and incomplete plastic deformation, and to identify possible problems in advance. As a countermeasure against the forming error caused by the drawing process analysis, the drawing shape was modified and applied in the process design. For effective material utilization, a 3D strip layout was designed using an optimized blank shape based on nesting. The results improve the crack stability and spring-back of shield connector products produced through progressive pressing.

• Journal of the Microelectronics and Packaging Society
• /
• 제26권3호
• /
• pp.63-69
• /
• 2019

Soldering technology has been used in electronic industry for a long time. However, due to solder fatigue characteristics, automotive electronics are searching the semi-permanent interconnection technology such as press-fit method. Press fit interconnection is a joining technology that mechanically inserts a press fit metal terminal into a through hole in a board, and induces a strong bonding by closely contacting the inner surface joining of the through hole by plastic deformation of press-fit terminal. In this paper, the bonding properties of press-fit interconnection are investigated with PCB hole size and surface finishes. In order to compare interconnection reliability between the press fit and soldering, the change in resistance of the press-fit and soldering joints was observed during thermal shock test. After thermal cycling, the failure modes are investigated to reveal the degradation mechanism both press-fit and soldering technology.