• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.1-7
• /
• 2012

Systematic safety research by Korea Government has been made to enhance the safety of CNG (compressed natural gas) vehicles since the burst of compressed cylinder of an urban bus in August 9, 2010. This article summarizes some major activities to ensure the safety of CNG vehicles, which covers review of regulation, safety management system including standard of inspection and certification, and training program of inspectors and car mechanics. Specifically, the followings were reviewed; type of CNG cylinder, location of CNG cylinder, material and type of fuel line and vent line, modification of pipeline connection, installation of gas detector, installation of emergency shutdown valve, installation of protecting cover for cylinder, obligations for CNG vehicle filling station. improving periodical inspection, routine test on gas vehicles, training program for engaged in gas vehicles, and designation of safety manager for CNG bus company. This paper suggests how to improve safety of CNG vehicles as a result of review of above mentioned check items.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.813-815
• /
• 2011

This study inspects the fault of the vehicle forming assembly and the assembly state of components at high speed and high degree of precision. This study also proposes the general inspection system capable of adapting to a number of products. The inspection program is composed of the fault inspection algorithm to examine the surface of the object and the state of the assembly and the high speed procession algorithm for the real time examination. The fault inspection algorithm is processed largely by a method using average of pixel in ROI and a method dividing the area and checking the presence of the object. Lastly, we verified the efficiency of the sysytem through the evaluation of its accuracy and processing time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.739-740
• /
• 2016

본 연구는 2륜자동차용 가스분석기 벤치보드와 "교통안전공단" 서버와의 데이터를 전송할 수 있는 중간 미들웨어와 통신 프로토콜 분석에 관하여 연구하였다. "교통안전공단" 서버로의 데이터 전송은 향후에 구축된 2륜자동차 관리 서버와의 통신과 벤치보드와의 통신 내용을 관리할 수 있는 브릿지를 설계하여 벤치보드와 "교통안전공단" 서버와의 데이터 정송 결함 유무를 모니터링 할 수 있는 시스템에 관하여 연구하였다. 또한, 2륜자동차용 배출가스 검사기의 내부 데이터를 원격에서 관리할 수 있도록 이더넷(TCP/IP) 기반의 데이터 통신 프로토콜도 분석하고 설계하였다. 본 연구를 통하여 설계된 가스분석기 통신 프로토콜을 통하여 2륜자동차 검사소에서 계측된 데이터와 "교통안전공단" 서버와의 데이터의 무결점을 제공하기 위한 통신 프로토콜에 대한 데이터 모니터링 기능과 간단한 표시기능을 제공하는 모듈을 제시하고자 한다.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.392-399
• /
• 2010

The Automobile has developed and changed through the years from the invention and increased human-being's scope of activity. Junction Box, one of the part of automobile, is inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. This paper is automatic inspection of fuse and relay which is inserted in the junction box by checking the color and pattern of the cover. After checking the performance of the system by using the junction box, the result was 100 percent perception and open the possibility to inspect junction box fast and easy and accurate if it is applied to the industry.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.805-807
• /
• 2011

In this paper, we propose a method to inspect defects of injection molded automotive parts. In order to inspect them, we developed and used a line detection algorithm and a defect analysis algorithm. The line detection algorithm defines center point of a laser line and the inspection algorithm determines the defects of automotive parts using pattern data of inspected objects and the data results from the line detection algorithm. We evaluated the accuracy and the processing time of inspection and they showed good performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1558-1563
• /
• 2010

This paper describes a study on algorithm for the development of machine vision system as well as the inspection of automobile's plastic part locking lever to replace a human worker's eye inspection. Before developing the machine vision system based on the PC, the purpose of this research is to develop the algorithm to decide whether a product is a good/bad one in real time inspection. NI-LabVIEW software is used in the inspection method and an inspection program is developed using LabVIEW Vision image functions. The inspection program was built and validated to help the system operator set up the inspection area and change the criteria number in the program.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.634-635
• /
• 2014

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.107-116
• /
• 1992

자동차 공업에서의 용접은 주로 차체조립공정에서 많은 사용되고 있으며 전기저항용접, ARC 용접, GAS용접등이 쓰이고 있지만 특히 전기저항용접의 SPOT WELDING이 그 대부분을 차 지하고 있다. 자사의 경우 AUTO GUN이나 ROBOT의 적용으로 차종에 따라 자동화가 거의 90%에 이르며 이 수치는 향후 더욱 증가 되리라 본다. 최근의 연비향상을 위한 경량화와 장 기방청성 요구추세에 따른 새로운 소재 즉 Al, 2층도금강판등의 채택에 따라 자사실정에 맞는 적합한 용접기술개발이 필요하다. 본론에서는 점용접의 검사 방법과 검사기준, 용접 신뢰성 확 보를 위한 제시도와 신소재 적용에 대응한 개발의 필요성, 용접 자동화등의 현황들을 자사를 중심으로 실례를 들어 소개하고자 한다.

• Composites Research
• /
• v.28 no.4
• /
• pp.143-147
• /
• 2015

This paper proposes laser ultrasonic technique for the impact damage inspection of hydrogen fuel tank and proves that the impact damage can be visualized using an ultrasonic wave propagation imager with an easy detachable sensor head as an impact damage inspection tool for hydrogen fuel tanks. Also the performances of the proposed ultrasonic propagation imager support it can be implemented in real-world technology when the hydrogen car becomes popular.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.3
• /
• pp.71-78
• /
• 1999

This paper presents an integrated and automated inspection system using image processing technology for the automotive engine assembly process. The system make it possible for the inspected data to be entered directly from the machine vision into the statistical process control system. Such direct entry enables the prompt preparation of corrective actions against process problems. An IVP-150 machine vision board is installed within the PC for image processing, and a template matching technology is implemented to precisely verify quality factors. The developed system showed robustness to the problems of noise, distortion, and orientation.