• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.53-55
• /
• 2002

본 연구는 자동차 급발진 사고에 관한 안전장치 개발에 그 목표를 두고 있다. 최근들어서 자동차 급발진 사고는 사회문제화되고 있고, 인명피해뿐만 아니라 자동차회사와 소비자간의 법적 피해 보상문제가지도 대두되고 있으며, 최근 자동차 설계구조의 문제가 있다는 법적 해석이 나오기도 했다. 본 연구는 자동변속기를 장착한 자동차의 급발진 방지용 변속레버 제어장치에 관한 것으로 구체적으로는 브레이크 페달을 밟고 있어야 변속레버조작이 이루어지도록 한 변속레버 제어수단을 솔레노이드 작동에 의한 스토퍼로 제어하되 스토퍼를 걸림 작동부로 간편하고 있도록 한 안전장치이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.622-626
• /
• 2001

Every design activity has a goal of satisfying a set of functional requirement. The commencement of a design, therefore, must have its foundation upon the identification of the functional requirements. Many of the design practices of the industrial examples can be categorized as design of small systems that are defined to have limited and fixed sets of functional requirements to be satisfied at all times. In the case of small systems it facilitates the construction of a knowledge-based system for a specific purpose to decompose the functional requirement and map ones in the lowest level into specific design features. When the number of design features is large, they need to be managed by groups. This paper suggests a grouping method for design process can be regarded as a series of selections of the predefined functional primitives according to the requirements and the preceding selections. An intelligent product design system for automatic transmission lever design is developed as an example.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.57-65
• /
• 2016

The power flow of an 8-speed automatic transmission was analyzed using a lever analogy for the manufacturing of planetary gears. From the analysis, we found that the engine power was split between the first and second double-pinion planetary gears (DPPG1 and DPPG2), and was then passed to the DPPG3 for the fourth speed. For the fifth speed, the engine power was split between the DPPG1 and DPPG3. For the speeds 6-8, the engine power was passed only to SPPG2, while the seventh speed contained the power circulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.41-46
• /
• 2007

This article deals with the design and prototyping of Shift-By-Wire system for an automatic transmission equipped vehicle. In order to manipulate the shifting action electronically, Shift-By-Wire system consists of an electronic shift lever, an electric shift actuator and position sensors. The shift lever is designed to transform the driver's shifting command into an electric signal; it includes the position sensor using non-contact type hall sensor and an additional shifting switch acting as Tip-tronic. For the design of an electric shifting actuator, we investigated the stroke angles and shifting efforts of the manual control lever in each shifting section. And the position sensor of the shifting actuator is designed by using a potentiometer with an optical encoder. Finally the prototype of Shift-By-Wire system was built in a conventional 2.4L class SUV vehicle, and we performed road tests in order to verify its performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.48-56
• /
• 2016

In this paper, we analyze the power flow of an eight-speed automatic transmission by using a lever analogy for the manufacturing of planetary gears. The results indicate that the engine power is passed down to the carrier and ring gear in the first double pinion planetary gear (DPPG1), and to the sun gear, carrier, and ring gear in DPPG3 for the first speed. Although the power flow is similar in the second speed, the power circulation occurs in the second single pinion planetary gear (SPPG2). For the third speed, the engine power is passed from the carrier to the ring gear in DPPG, at which point the power is split between the sun gears of SPPG2 and DPPG3.