• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.177-178
• /
• 2007

무선통신을 적용하여 최첨단 무인자동운전을 구현하기 위하여 기존 고정폐색의 신호시스템과 달리 무선에 의한 양방향 통신을 기본으로 하는 이동폐색시스템인 CBTC(Communication Based Train Control) System을 적용하고 있다. 이를 구현하기 위하여 열차의 위치를 검지하는 기법으로 TOA(Time of Arrival)을 적용하였으며 이를 토대로 시험선의 선로변에 설치한 무선기(Wayside Radio Set : WRS)와 차량에 설치된 차상 무선기(Vehicle Radio Set ： VRS)가 무선통신을 수행하고 지상에서 측정거리 결과로부터 열차의 위치를 계산되는 것이다. 이는 경로A의 다중주행 결과로부터 WRS와 VRS간의 거리에 따라 비례하여 증가하는 것을 확인하였고 아울러 측정거리지점에서의 품질이 우수함을 확인하였다.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.6-15
• /
• 2023

This paper develops scenarios to evaluate the safety performance of Unmanned Ground Vehicle on military circumstances. The scenarios were created using Pegasus Project 6-layer format. These scenarios consist of straight road, curved road, merging road and crossroad. We adapt these scenarios to unpaved road. The characteristics of unpaved roads were divided into roughness, friction coefficient and road frequency. This adaption is validated via computer simulation. We observe the scan lines of vehicle become tangled of the straight road that make the cognitive abilities of the vehicle low and the lane-keeping is unable when vehicles entering curved off-roads over 40 km/h. The developed scenarios will contribute to enhancing stability from the perspective of introducing autonomous driving technology to Korean military.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3037-3047
• /
• 2000

This paper describes a method of tracking a close leading vehicle by color image processing using the pairs of tail and brake lights. which emit red light and are housed on the rear of the vehicle in stop-and-go traffic condition. In the color image converted as an HSV color model. candidate regions of rear lights are identified using the color features of a pair of lights. Then. the pair of tailor brake lights are detected by means of the geometrical features and location features for the pattern of the tail and brake lights. The location of the leading vehicle can be estimated by the location of the detected lights and the vehicle can be tracked continuously. It is also possible to detect the braking status of the leading vehicle by measuring the change in HSV color components of the pair of lights detected. In the experiment. this method tracked a leading vehicle successfully from urban road images and was more useful at night than in the daylight. The KAV-Ill (Korea Autonomous Vehicle- Ill) equipped with a color vision system implementing this algorithm was able to follow a leading vehicle autonomously at speeds of up to 15km!h on a paved road at night. This method might be useful for developing an LSA (Low Speed Automation) system that can relieve driver's stress in the stop-and-go traffic conditions encountered on urban roads.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.107-108
• /
• 2011

Since the development of railway technology, the current urban Railway the first train line in the country for safe operation control automatic/unattended operation, automatic train operation equipment available (ATO) on time and reliable operation has introduced. ATO Automatic operation controlled by the value (Target velocity) and the feedback value (Actual velocity) by the error between the backing and braking of the train by repeated low energy efficiency. In this paper, given a fixed distance stations between time operation with minimal energy in the driving characteristics and driving trains are modeled. Therefore, in line 5 real route time sectional drive straight sections for experimental data analysis / draft Section / curved and section of the train on that line is selected according to the changing driving patterns to minimize the energy optimal driving patterns were presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.831-835
• /
• 2016

In this paper, a dual-channel feed-forward transimpedance(TIA) array is realized in a standard $0.18-{\mu}m$ CMOS technology which exploits automatic gain control function to provide 40-dB input dynamic range for either detecting targets nearby or sensing imminent danger situations. Compared to the previously reported conventional feed-forward TIA, the proposed automatic-gain-control feed-forward TIA(AFF-TIA) extends the input dynamic range 25 dB wider by employing a 4-level automatic gain control circuit. Measured results demonstrate the linearly varying transimpedance gain of 47 to $72dB{\Omega}$, input dynamic range of 1:100, the bandwidth of $${\geq_-}670MHz$$, the equivalent input referred noise current spectral density of 6.9 pA/${\surd}$HZ, the maximum sensitivity of -26.8 dBm for $10^{-12}BER$, and the power consumption of 27.6 mW from a single 1.8-V supply. The dual-channel chip occupies the area of $1.0{\times}0.73mm^2$ including I/O pads.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.433-434
• /
• 2022

물류 시설에서 사람이 직접 물류를 입출고하는 방식이 일반적이다. 본 연구에서는 물류의 입출고를 인력의 소모 없이 보다 안전하고 효율적으로 하는 것을 전제로 하여 스마트 팩토리 산업에 사용되는 AGV 시스템에 물류 입출고 시스템을 접목하고자 한다. 본 논문은 기존의 인력의 소모와 산업재해 위험이 있는 물류 시설 근로 환경에 AGV를 이용, 인력의 소모를 줄여 물류 입출고 프로세스를 무인화하고자 "AGV 물류 자동화 시스템"을 제안한다. AGV 물류 자동화 시스템은 적외선 센서를 이용해 라인 트레이서를 구현하여 원하는 위치로 AGV를 이동시키고 각종 모터로 물품의 입출고 임무를 수행하도록 한다. 스마트폰의 물류 관리 어플리케이션을 통해 AGV의 제어와 물품의 재고 파악이 가능하도록 하여 물류관리의 효율성과 편의성을 증대시켰다.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.526-534
• /
• 2009

PRT(Personal Rapid Transit) can be described as a system of driverless taxicabs, that. automatically take passengers to their destinations along dedicated guideways, without intermediate stops.It is ideally suited as a short feeder transportation for on-demand circulation operations at train stations, airports, office complex, amusement park and shopping center. This PRT study do suggest that a PRT system could provide a high level of mobility to the commuters making work trips, workers making work, shopping and other non-work trips, residents making shopping and other non-work trips and recreational riders.This study presents the possibilities of PRT applications in national level. As the technology continues to advance, there may be opportunities to improve the reliability, and efficiency of our future public transportation systems.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.133-142
• /
• 2008

AGV systems are widely used to increase the flexibility and the efficiency of the material handling systems. AGV systems are one of critical factors which determine the overall performance of the manufacturing systems. To this end, the optimal design for AGV systems is essential. Commercial simulation software is often used as an analysis tool during the design of AGV systems, however a series of procedures are desirable to simplify the analysis processes. In this paper, we present and develop the architecture for unidirectional AGV systems simulator which is able to consider approximate optimal unidirectional flow path and various operational parameters. The designed AGV systems simulator is based on JAVA, and it is developed to support designing approximate optimal unidirectional network by using Tabu search method. In addition, it enables users to design and evaluate AGV systems and to analyze alternative solutions easily. Simulation engine is consists of layout designer, AGV operation plan designer, and integrated AGVS layout designer. Users enter their system design/operation information into input window, then the entered information is automatically utilized for modeling and simulating AGV systems in simulation engine. By this series of procedures, users can get the feed back quickly.