• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.503-510
• /
• 2001

In this paper. we describe a 32-channel bioimpedance measurement system It consists of 32 independent constant current sources of 50 kHz sinusoid. The amplitude of each current source can be adjusted using a 12-bit MDAC. After we applied a pattern of injection currents through 32 current injection electrodes. we measured induced boundary voltages using a variable-gain narrow-band instrumentation amplifier. a Phase-sensitive demodulator. and a 12-bit ADC. The system is interfaced to a PC for the control and data acquisition. We used the system to detect anomalies with different resistivity values in a saline Phantom with 290mm diameter The accuracy of the developed system was estimated as 2.42% and we found that anomalies larger than 8mm in diameter can be detected. We Plan to improve the accuracy by using a digital oscillator improved current sources by feedback control, Phase-sensitive A/D conversion. etc. to detect anomalies smaller than 1mm in diameter.

• Proceedings of the KSMRM Conference
• /
• 2004.09a
• /
• pp.19-19
• /
• 2004

• Information and Communications Magazine
• /
• v.29 no.11
• /
• pp.75-80
• /
• 2012

본고에서는 송신단과 수신단 사이에 접점 없이 높은 효율을 유지하면서 기존의 방식(전자기유도방식, 전자기파방식) 보다 실용적인 거리의 무선전력전송이 가능한 자기공명방식 무선전력전송 기술을 소개하고 이를 모바일 단말기용에 적용하기 위하여 고효율 송/수신단 회로 설계, 자기공명안테나 설계, 실시간 임피던스 매칭 기술, 실시간 전력제어 기술 등등의 구현을 위한 요소기술에 대하여 소개함으로써 자기공명방식이 가지고 있는 특성을 구체적으로 알아본다.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.205-208
• /
• 2013

The width dependence of Delta E has been studied by impedance resonance method in Fe-rich amorphous ribbon of as received state. It can be explained by single domain model include effective magnetic field $H_{eff}$ and demagnetization factor $N_d$. Wider width ribbon's effective is smaller than narrow it. Young's modulus also smaller than narrow width. These result well agreement in calculation. It has been also studied that linear magnetic field sensor using width dependence of Delta E under the field range 0 Oe~80 Oe. The sensitivity of the sensor was found to be 95 Hz/Oe.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.325-332
• /
• 2008

The prediction method of TS parameters, frequency response, and electrical input impedance is proposed with physical properties of parts and results of electromagnetic FEA(Finite Element Analysis) in a loudspeaker driver design. In design for weight reduction and improvement of flux density asymmetry, the prediction results are well coincided with measurement ones. As the applications, it can be applied in design for improvement of the $2^{nd}$ harmonic distortion with flux density distribution analysis. The proposed method is expected to be utilized for reducing trial-and-error process in electromagnetic parts design. It can also be used for providing guidelines for parts selection in the early stages.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1958-1959
• /
• 2007

공극이 있는 인덕터의 임피던스는 공극 내에 도전율이 있는 물체가 삽입 될 때, 와전류가 발생하여 임피던스의 변화가 생긴다. 이 현상을 이용하여 도체의 종류 및 불순물을 판단할수 있는 장치를 구현하였다. 이를 위해 자기회로법을 이용하여 인덕터를 설계하였고, 전자장 시뮬레이션을 통해 특성을 해석하였다. 또한 실제 시스템을 구현함으로써 해석결과와 실험결과를 비교하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.3-6
• /
• 2000

Because the generally reported radiation impedance has been calculated for vibrating surface with infinite baffle, the results have difficulties to apply for design of the real transducers with finite baffle. In this paper, with assuming a vibrating surface as a set of small point sources, a new calculation method for the vibrating surface with finite baffle is suggested by considering the effect of finite baffle on the source strength of each point source. As an example, the variation of self-radiation impedance for rectangular vibrating surface is calculated according to the size of baffle. The results show that the suggested method is useful.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.58-62
• /
• 1995

Integral equations of self-radiation impedance of a rectangular piston in a rigid infinite baffle are derived using by polar coordinate. The self-radiation impedance is separated by two parts ; self-radiation resistance and self-radiation reactance. Derived integral equations are simulated by numerical method. Based on the numerical results, self-radiation impedance can be obtained in the low and high frequency ranges without any limited conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.73-76
• /
• 1999

In this thesis, we fabricate a zero-magnetostrictive amorphous ribbon measure the impeadance effect, and then Investigate possibility as a sensor material. $Co_{72.5}$F $e_{0.5}$M $o_{2}$ $B_{15}$ S $i_{5}$ is used as composition of specimen alloy. We first melt the specimen in high frequency induction furnace and then rapidly quench it by using single roll technique. As the result, we obtain a ribbon where thickness is 12${\mu}{\textrm}{m}$, width is 1mm and length is 93mm. Consequently, it is proved through this study that zero-magnetostrictive amorphous ribbon can be used as an excellent magnetic sensor material.rial.l.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.80-80
• /
• 2004